Filter Results By:

Products

Applications

Manufacturers

ATCA

Advanced Telecom Computing Architecture

See Also: AdvancedTCA, AXIe


Showing recent results 1 - 15 of 48 products found.

  • ATCA Blades.

    RadiSys Corporation

    ATCA blades share a common form factor, simplifying the task of creating multiple network elements based off a single platform. This common architecture fosters both multiple applications with the same assets (blades) and interoperability among different types of blades used in variety of applications. It also makes it easier for system vendors to offer comprehensive infrastructure solutions, whereby equipment makers can integrate additional elements from the ecosystem as necessary. There are many categories of ATCA blades supporting a range of functionality including compute, packet processing and networking. Furthermore, board vendors offer a mix of I/O, compute capacity, backplane interfaces and so on, providing equipment makers with a wide choice for components and subsystems. By choosing an ATCA Blade from Radisys, you can be assured that you’ve chosen the highest quality component available today

  • ATCA 3.1 switch device

    ZX7300 - ZNYX Networks, Inc.

    The ZX7300 is an ATCA 3.1 switch device designed for use in an Option 1/9 Payload slot. It implements a switch fabric with 24 ports of GigE in-band switching and four ports of in-band 10GigE. Two of the 10GigE ports are routed to the ATCA Fabric to participate in a dual-star 10G architecture with two 10G Hub switches such as the ZX7200 or ZX7250. The link partner over the backplane can be any device that is Option 1 (1G) or Option 9 (10G) compliant.

  • ATCA Compute Blade

    ZX9200 Series - ZNYX Networks, Inc.

    The ZX9200 Series ATCA compute blades offer a completely integrated solution that helps customers save on costs, while reducing time to market using the latest Intel® Xeon® processors. A single ZX9200 blade can host up to 40 virtual machines (VMs) with dedicated hardware threads to facilitate highly scalable virtual environments.

  • ATCA Compute Blade

    ZX9210 - ZNYX Networks, Inc.

    Virtualized environments have become a key requirement for next–generation applications, reducing system infrastructure costs and offering improved efficiency and scaling. The ZX9210 allows System Architects the highest performance Intel® Xeon® E5–2600 Series processors with the largest memory footprint available in an AdvancedTCA® (ATCA) compute blade to host up to 32 virtual machines (VMs) in a single compute blade, each with a dedicated hardware thread.

  • ATCA 3.1 compatible Shelf Manager/Switch

    ZX2000 - ZNYX Networks, Inc.

    The ZX2000 is a distinctively optimized mid-range ATCA 5U platform for general purpose deployments in telecommunications, scientific, enterprise, military or aerospace.This 6 node 5U chassis offers the industry's highest number of payload slots available in a 5U form factor. The ZX2000 provides a highly integrated platform infrastructure by compressing dual switch/shelf managers into the small envelope normally used for the shelf managers alone. This industry-first architecture offers a greener, more energy efficient, and more cost-effective platform for typical ATCA 5U applications. This denser platform allows customers to decrease space requirements as well as reduce overall CAPEX and OPEX.

  • ATCA 3.0 Base Ethernet Switch

    ZX6200 - ZNYX Networks, Inc.

    The OpenArchitect ZX6200 is an ATCA 3.0 switch with full support for Base switching plus external 10-Gigabit ports. The Base Interface is served by a high-capacity, non-blocking Ethernet switch fabric with 24 Gigabit Ethernet ports and two 10-Gigabit Ethernet ports. With this configuration, the ZX6200 can support a full-chassis of Base payload boards while providing 10-Gigabit Ethernet ports via SFP+ modules for chassis uplink.

  • ATCA 3.1 Option 1 / 9 Ethernet Switch

    ZX7250 - ZNYX Networks, Inc.

    The OpenArchitect® ZX7250 is an ATCA 3.1 switch that achieves the full potential of the 10-Gigabit Backplane market. With twenty 10-Gigabit Fabric ports, the ZX7250 can support a full-chassis of Option 9 / Option 1 payload boards while hosting five 10-Gigabit Ethernet ports for chassis egress. The Base Interface is served by a separate switch with 24 Gigabit Ethernet ports and an additional two 10-Gigabit Ethernet ports.

  • ATCA 3.1 Option 1 / 9 Ethernet Switch

    ZX7200 - ZNYX Networks, Inc.

    The OpenArchitect ZX7200 is an ATCA 3.1 switch that achieves the full potential of the 10-Gigabit Backplane market. With twenty 10-Gigabit Fabric ports, the ZX7200 can support a full-chassis of Option 9 / Option 1 payload boards while hosting five 10-Gigabit Ethernet ports for chassis egress. The Base Interface is served by a separate switch with 24 Gigabit Ethernet ports and an additional two 10-Gigabit Ethernet ports.

  • 16-port GigE Base Fabric switch for ATCA with OpenArchitect Switch Management

    ZX5000 - ZNYX Networks, Inc.

    The ZX5000 is a 16-port AdvancedTCA Base Fabric switch based on the Intel IXE5416 switch silicon. Providing Gigabit Ethernet service for 12 payload slots, the ZX5000 uses the ZNYX Networks OpenArchitect 3 running on its embedded MPC8255 to provide complete and flexible switch management. Three switch egress ports are provided, and one port is dedicated to the switch-to-switch connection in redundant configurations. For additional management connections, two out-of-band 10/100 Ethernet management ports and one RS-232 port are provided to the front panel. The ZX5000 provides fully PICMG 3.0 compliant chassis management with its on-board IPMI controller.

  • 24-Port Base Switch Blade With 10GbE Uplink

    aTCA-3150 - ADLINK Technology Inc.

    The aTCA-3150 is a 24-port GbE AdvancedTCA® (ATCA) Multilayer Base Switch Blade based on Broadcom BCM56312 switch silicon. It supports up to thirteen GbE ports for a 14-slot PICMG 3.0 ATCA system, with six egress GbE ports and two 10GbE SFP+ uplink ports via front panel access. The ADLINK aTCA-3150 incorporates Broadcom's FASTPATH® networking software and is designed for ATCA adopters (NEPs & TEMs) who require AMC modularity, Gigabit layer 3 switching, a scalable control-plane engine and high-availability Base Interface.

  • 40G Broadcom Switch & Control

    ATCA-2340 - RadiSys Corporation

    The ATCA-2340 is architected to be the heart of a cost-effective ATCA platform, providing highly integrated, centralized common equipment functions – switching, shelf management, network timing and system management functionalities. The ATCA-2340 Broadcom 40G switch incorporates innovative and modular design to provide a highly configurable solution. For example, the designer can select L2 or L3 routing capabilities, I/O, network timing, and system management. It will meet or exceed bandwidth requirements for next-generation applications like LTE, WiMAX, DPI, and Mobile Video.

  • 14-Slot Chassis

    ATCA CO14G4 DC 14 Slot 14U - Comtel Electronics

    The new flagship AdvancedTCA® 14-slot chassis, DC version is Comtel’s “4th Generation” and the latest in high performance platforms for ATCA. Its modular design offers ultimate flexibility to provide a solution tailored for your needs.

  • 14-Slot Chassis

    ATCA CO14G4 AC 14 Slot 15U - Comtel Electronics

    The new flagship AdvancedTCA® 14-slot chassis, AC version is Comtel’s “4th Generation” and the latest in high performance platforms for ATCA. Its modular design offers ultimate flexibility to provide a solution tailored for your needs.

  • Dual Intel® Xeon® E5-2600 v3

    ATCA-4700 - RadiSys Corporation

    The ATCA-4700 is a 10th generation, high-performance, single-slot compute blade based on the dual socket E5-2600 v3 Intel® Xeon® processors with 8 VLP DIMM sockets. ATCA-4700 compute module is ideal for Deep Packet Inspection (DPI), packet processing, video optimization, applications that require High Density I/O and the highest performance processing possible. Developers want the most performance they can get in an ATCA blade. The ATCA-4700 provides 40GbE network throughput and reduces the number of blades in a system. The ATCA-4700 provides an optimized cost-performance range of E5-2600 v3 processors with capacity up to 512Gb of DDR4 memory via 8 VLP DIMM sockets. This combination of processor and memory density enables the highest processing performance possible in a single slot.

  • Packet Processing Platform

    ZX2040 - ZNYX Networks, Inc.

    The ZNYX ZX2040 AdvancedTCA® (ATCA) hub switch enables the Ultra5™ ZX2000 5U ATCA blade server platform to be upgraded quickly and easily from a 10G fabric connection to a 40G solution. With the ZX2040, the ZX2000 5U ATCA blade server can provide up to 480G on the backplane to fulfill the most demanding data plane applications. The 8 core Intel® Atom™ processor C2000 delivers high performance with low power consumption, which ensures a cost–effective performance hub switch for ZNYX customers.