-
product
Digital Video Inspection Microscope
Contamination is the first reason for troubleshooting optical networks. Proactive inspection and cleaning of fibre connectors can prevent poor signal performance, damage to equipment, and network downtime. DIAMOND’s Video Microscope Kit contains all necessary tools for proper inspection and cleaning of the connector’s front-faces to help ensure optimal connector performance.
-
product
Anritsu DualX Inspection Systems
The new DualX inspection system from Anritsu offers unsurpassed detection of high-density foreign material, including small bone fragments. Built on Anritsu's groundbreaking, field-proven original model, the DualX gives you the best detection capability available in the industry, along with a significantly lower total cost of ownership (TCO).
-
product
High Precision Angular Positioning, Calibration and Geometry INspection
LabStandard AIR
Rotary Precision Instruments UK Ltd
Ultra precise rotary tables intended for fine inspection, metrology and test applications.The LabStandardAIR has been designed as a “Contact Free” system and eliminates features, which may detract from achieving the optimum rotational performance. The rotating elements are supported on super high precision, air lubricated, hydrostaticbearings and are not subject to disturbances associated with gear drives.
-
product
Sensor for Filament Inspection
EyeFI
EVT presents the EyeFI - the sensor for the inspection of filaments. The sensor contains two cameras with an Aptina sensor and S-Mount lenses. The cameras are perpendicular to each other. It is therefore possible to inspect two sides of the filament, which means that the EyeFI can detect if the filament is out-of-roundness. Additionally the errors and defects can be detected. For example the occurring flaws are point-shaped or partly flaked, or point-shaped and transverse, or also looking like a longitudial rib, or only spots in different shapes. The defects can be detected with the EyeFI sensor. The EyeFI contains board cameras with sensors from Aptina, the IoCap and an evaluation processor. The housing is about 14x10x4 cm in size. The IoCap is the image-capture-IO-board, which is designed and developped by EVT.
-
product
Qualicoat Powder Coating Inspection Kit
The aim of Qualicoat is to establish the minimum standard that plant installations, coating materials and finished products which have been powder coated must meet.Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of this organisation.
-
product
Fiber Optic Inspection Microscope
80760
The Miller 200x Microscope helps inspect fiber optic connectors quickly and easily. Its ergonomic design and built-in features make it ideal for field and lab use. The microscope features a pressure-activated on/off switch, focusing wheel, eyepiece, auxiliary white LED light source rated for 100,000 hours, adapter tip for inserting ferrule and battery compartment.
-
product
X-ray Inspection System
RTX-113HV
Precision X-ray Inspection for BGAs, QFNs, LEDs, sensors, medical devices, and other packaged devices.
-
product
Motor Vehicle Inspect Lines Engineer Program
Foshan Analytical Instrument Co, Ltd.
It is suitable for measurement of motor vehicles equipped ignition engine with max total mass more than 3500kg. Including the dual idle speed method test. Meet the requirement of GB18285-2005"Limits and Measurement Methods for Exhaust Pollutomts from Vehicles Equipped Igintion Eigine under Two-speed Idle conditions and simple Driving Mode Conditions". The system can select the prompt mode of the dirver mode or the prompt mode of lattice screen.
-
product
Portable gear inspection- and 3D-measuring systems
ultimate independent measurement - on the production machine or on the shop-floor without rotary table
-
product
Post Wire and Die Bond Inspection Machine
IV-E1700
IV-E1700 is a post wire and die bond inspection machine that is known for having a proven, effective and patented 2D+3D Inspection system. This product is best used to weed out defects with data collection for process improvement and reports for SPC quality Control.
-
product
Semiconductor Wafer Microscope Inspection System
MicroINSPECT
MicroINSPECT Semiconductor Wafer Defect Microscope Inspection System combines state-of-the-art robotics, intelligent microscopes and SITEview software to provide a flexible, easy-to-operate defect inspection platform for either micro or macro defect wafer inspection.
-
product
Fiber Optic Inspection
Optical Wavelength Laboratories
A dependable connector endface inspection scope is a vital part of any fiber optic professional’s tool kit. Inspecting patch cord connector endfaces before attaching them to equipment or patch panels saves time and effort, and ensures a clean, quality connection. These 400x video inspection scopes allow users to view connector endfaces on a PC or laptop screen, preventing harmful invisible light from entering the users eye, and ensuring maximum eye protection.
-
product
First Article Inspection Services
API’s, on-site, first article measurement services provide inspection data on parts and assemblies with direct comparison against CAD models or drawings. Generated 3D measurement data from our portable metrology equipment and 3D scanners offers a comprehensive analysis of the physical part under measurement. Inspection reports can include 3D color maps or generated 3D models for detailed computer analysis.
-
product
In-line Inspection And Integrity Services
The safety, integrity, and operating efficiency of your assets are at the core of what we do. Baker Hughes Process & Pipeline Services (PPS) unique portfolio of services helps you confidently manage the lifecycle of your pipeline—delivering timely and stress-free startup, supporting day-to-day reliability, and enabling controlled decommissioning.
-
product
Entry Level GPR System for Concrete Inspection
StructureScan Mini LT
Geophysical Survey Systems, Inc.
The StructureScan™ Mini is GSSI’s all-in-one GPR system for concrete inspection. This handheld system locates rebar, conduits, post-tension cables, voids and can be used to determine concrete slab thickness in real-time.
-
-
product
Pulsed DC Holiday Detector Inspection Kit
280
The Elcometer 280 Pulsed DC Holiday Detector is a ‘stick type’ holiday detector that has been designed to make pulsed DC high voltage holiday detection safer, easier and more reliable than ever before.
-
product
Video Inspection Probe
With today's high data rates and high definition services, connector quality and inspection has never been so important. Research reveals that up to 75% of all optical network failures are attributed to poor connector quality - reduce your installation time and ensure your network is reaching its full potential.The Video Inspection Probe (VIP) application for Anritsu field testing platforms gives operators a safe, easy way to analyze and document connector conditions.
-
-
product
Ceramics and Glass Inspection Systems
Due to their special material properties, ceramic and glass components are the basis of many high-tech products. The same properties make the production complex and costly. Substrate defects that lead to failure of finished components should be avoided at all costs. For this reason, early automated optical inspection is essential.For the inspection of sapphire and quartz glass Intego has developed systems to detect both external and internal defects and can also provide cutting suggestions. Using index matching it is possible to test rough or uneven glass profiles.For the inspection of ceramic components Intego offers solutions specifically tailored to the respective testing task. Our modular design uses standard components that have already been developed and tested and in most cases only requires minimal adaptation.
-
product
Structural Adhesive Bead Inspection
Predator3D
The Predator3D bead inspection technology measures bead height, width (volume) and position to assure structural integrity. It also alerts users to skips and partial skips, where material is deposited with insufficient volume.
-
product
In-Line X-ray Inspection System
X-eye 6200
Automatically in-line inspect Solder joint defects of PCBA, and other defects on Hidden Components.Able to judge Good/NG fast with inspection speed of 1sec/FOV and the program can set ROIs conveniently.Performing X-ray inspection in various production site, integrated with other manufacturing equipements.
-
product
Post Wire and Die Bond Inspection Machine
IV-T3300
IV-T3300 is a post wire and die bond inspection machine with Dual JEDEC Tray Feeder System. It features a large inspection area of 600x500mm and a quick trays change of 5-7 seconds.
-
product
Sound Level Meter for Automotive – Car Noise Emission Inspection
HD2010MCTC
The level of noise produced by vehicles shall comply with standards prescribed by international regulations. During car inspections, horns and exhaust devices must be in good condition and comply with the requirements.
-
product
Fixture and Software for Open/Leak Inspection
In addition to jigs and fixtures for probing conductors and electrode pads, NIDEC-READ provides specialized software for test point selection and log analysis.
-
product
Luminescence Defect Inspection System
INSPECTRA® PL Series
This system uses luminescent images created using photoluminescence (PL) to perform high-speed, high-sensitivity automatic inspection for crystal defects, cracks, and luminescence defects which cannot be detected with conventional visible light surface inspection!
-
product
Automated Optical Inspection (AOI)
TR7700 SIII
TR7700 SIII is the newest generation of TRI's AOI solutions, delivering precise multi-phase inspection at full speed. By combining an ultra-fast camera, intelligent auto conveyor, and new GUI, the TR7700 SIII offers a powerful and easy to use AOI solution with fast programming, optimized board loading, production line integration and support for offline programming. TRI's new color algorithm combined with multiple lighting phases increase defect coverage and help deliver highly accurate inspection results with a minimum of false calls.
-
product
X-Ray Inspection
X-ray inspection systems are used wherever defects need to be detected by non-destructive means. The spectrum of use is broad and ranges from quality controls for complex assemblies, to the testing of materials for cracks and air inclusions, to foreign matter inclusions and shape deviations. The trend toward miniaturization, higher packing densities, and the relocation of components to the interior of the assembly require precise X-ray inspections that detect hidden defects quickly and reliably. X-ray systems from Viscom are used for the inspection of series assemblies as well as sampling and prototype controls. They take care of typical inspection tasks in concealed areas such as void controls, THT filling level measurements, and HIP inspections. At the same time, the systems reliably determine defect features such as coplanarity and polarity – at high inspection speeds and in a cost-effective way.
-
product
Packaged Food X-ray Inspection System
EPX100
Our revolutionary new x-ray system is so advanced it will not only improve your product safety and meet regulatory compliance but also will optimize and streamline your product inspection.
-
product
IoT Data Inspection App
Data Explorer
he Application Data Explorer allows you to easily explore, aggregate, and analyze historical data across all of the devices in an application. The data explorer can be accessed through the "Data Explorer" link in the Application navigation bar: control the time range, resolution, and aggregation of the data. determine what devices and attributes we are gathering data from. displays the data in various ways (in graph form, in table form, or in aggregation form)
