Back Planes
An interconnection structure allowing multiple printed circuit boards to coexist using a single bus.
-
Product
Industry Pack Carriers and Digital I/O
CPCI-4SIP-6U
Digital I/O
The CPCI-4SIP-6U module provides a high performance flexible I/O scheme, that supports industry standard Industry PacksÔ. For application requiring low cost, high density I/O or unique combinations, the CPCI-4SIP-6U is the perfect solution. There are four (4) Industry Pack sites providing up to 200 I/O pins accessible from either the front panel or the rear back plane.
-
Product
Qualification Hardware & Sockets
-
Reltech Limited holds over 35 years’ experience in the design and manufacture of all types of qualification test hardware. Our advanced technology products include: HTOL Boards (Mother and Daughter cards) Burn-In Boards HAST Boards THB (humidity) Boards Burn-In Modules and frames Dynamic Driver cards (Digital, Analogue and Mixed signal) Back Planes Voltage regulator cards Custom electro-mechanical assemblies DUT Cassettes and test Fixtures
-
Product
Intel 80486 DX2 Processor Board
MS 1500
-
- PC 104 bus and ISA bus interface- Facilitates design of scalable architectural solution for Embedded System- Back plane eliminated by self-stacking PC 104 bus- Substantial reduction of development time, cost, as well as risk- Helps to Faster time-to-market / timely product productions- Used for LCA Simulation Project- Intel 80486DX2 @ 33MHz- 512Kbytes of STATIC RAM, 2048 Kbytes of FLASH PROMS- 64 Kbytes of DPRAM- External Interrupts- RS232 Serial Interface- Watchdog Timer- External Bus Interface
-
Product
USB BUS Controller Board
MS 1711
-
- 8 bit and 16 bit compatible Read and Write Cycles- Single or Block Memory and IO Write Cycles- Interrupt Cycle Generation- The generated bus cycles signals is compatible with ISA96 system back plane- External Reset- Double Euro Standard Board- Driver interface for Windows2000/XP/VISTA and LINUX OS
-
Product
Multifunctional Data Acquisition Systems
MS1201
-
This system used for multi-purpose applications such as data acquisition and Automatic Test Equipment. ATE Computer has ISA Bus based eleven slots with inbuilt power supply. Micro Processor board or USB Controller is used to drive the back plane.
-
Product
80 Channel Relay Switch
DP-VXI-4503
-
DP-VXI-4503 is a 80 channel, one Form C (SPDT) relay switch designed as a C size VXI module. This high density switch module is designed with a register based interface occupying only one VXI slot. This module uses two Form ‘C’ relay switches. Out of the two contacts in each relay, one is used to provide the status of the relay through read back and the other is used for switching purpose.The user can write the command for the selected channels on to the primary latch of the FPGA section. Readback is available to confirm the selected commands. On command, the data from the primary latch is transferred to the secondary latch. The relay driver section provides the necessary drive to switch ON the relays. The buffers in this section drive the relay coils.This module features a back plane trigger for VXI triggered operation. On receipt of the back plane trigger the programmed relays will be energised/de-energised. Alternatively, software trigger can be used.
-
Product
Back Plane Tester
-
This machine is used to test back planes used in telecommunications central stations. An operator loads a completed point to point wired back plane onto a retractable shelf on the front of the tester. Table continues and the disk falls through a hole into the bin. The shelf is pushed back into the machine where it is held in place by pneumatic operated clamps. Then a series of pneumatic cylinders sequentially insert a test card into each location in the back plane. A remote instrument performs a complete point to point continuity, short and hi pot test on all connections in the back plane.
-
Product
Signaling Control and Monitor Equipment
MS 1303
-
The Railway signaling unit is used to receive the input signals from the field for validating and clearing route for trains. After receiving the signals, signals are isolated and various tests are done inside the system to ensure the received signals reliability and produce clearance signal to railway line. For security reasons card signature has been given to each card in the system. System consists of digital input modules, digital output module, digital read back module, RS232 interface with 80486 processor board. It is an ISA Bus Back plane based system.
-
Product
Control and Switch Modules
Mini Mux
-
Eclypse International Mini Mux Control and Switch Modules, plus Software Developer Kit (SDK) provides high density test circuit switching as a complement to the Eclypse Circuit Analyzers. The Mini Mux Switching gives the user the ability to test continuity and isolation in complex assemblies with thousands of circuit paths (such as avionic back planes and chassis), while minimizing the test equipment complexity and footprint.
-
Product
ATE Computer
MS 1201
-
This system used for multi-purpose applications such as data acquisition and Automatic Test Equipment. ATE Computer has ISA Bus based eleven slots with inbuilt power supply. Micro Processor board or USB Controller is used to drive the back plane.
-
Product
Plane Mirror
10728A
Plane Mirror
The Keysight 10728A is a normal incidence plane mirror for beam diameters of 9 mm or less. It is a bare optic that requires a user-supplied mount. It is typically used with the 10735A and 10736A three axis interferometers.
-
Product
Matrix
HLX
-
The HLX™ System is easy to configure to your exact requirements. It distributes HDTV signals up to 1,000 feet away to convenient zone receivers mounted wherever televisions are to be located. For audio systems, the HLX offers DSP and volume control per output (more about HLX for audio). Optional audio zone cards feed multi-channel amplifiers to distribute music to zones. Its robust back plane design allows up to 12 sources to distribute component video up to 1080p, along with analog stereo audio, digital coaxial audio, and digital optical audio. Four audio sources may be added, for a total of 16 source inputs. The new HLX offers a winning combination of performance, value, and unique features.
-
Product
Turning Mirror
10772A
Plane Mirror
The Keysight 10772A Turning Mirror is a 100% reflectance mirror that turns the direction of an incoming laser beam 90 degrees. The mirror is used in the 5530 Laser Calibration System for applications such as machine tool calibration. It can be used in place of the 10707A Beam Bender (6 mm or less beam diameter) for applications that require the larger aperture of the 10772A.
-
Product
Turning Mirror on Universal Mount
10769B
Plane Mirror
The Keysight 10769B Turning Mirror on Universal Mount deflects a laser beam at any angle, in either the vertical or the horizontal polarization plane of the beam. The 10769B contains the same turning mirror as the 10769A, but has a different mounting.
-
Product
Multi-Sensor In Plane
MS 1000-IP-20
-
Advanced Thermal Solutions, Inc.
The MS 1000-IP-20 is a three-sensor probe designed for measuring fluid velocity and temperature in the same vertical plane. It eliminates the need for multiple probes or a traversing probe for determining the flow profile or distribution.
-
Product
Ruled Plane Gratings
-
HORIBA Scientific produces a wide range of holographic master gratings from which high precision replicas are manufactured. Ruled reflection gratings are especially well suited for spectroscopic systems requiring high efficiency, high resolution and covering a spectral range from UV to IR.
-
Product
Plane Mirror Interferometer
10706A
Differential Interferometer
The Keysight 10706A Plane Mirror Interferometer is a dual pass interferometer used for multiple axis applications such as X-Y stages where the measurement mirror may move perpendicular to the measurement axis. The unique contribution of the 10706A is its tolerance of angular misalignment of the plane mirror reflector. The 10706A can accept a range of measurement mirror angular alignment changes.
-
Product
Push Back Probe VF383B0004G10
1006648
-
The Push Back Probes (VF3) VF383B0004G10 is a highly specialized basic contact probe designed for precise applications within a temperature range of -45°C to +100°C. This probe features a small pitch of 3.00 mm (118 mil), making it an excellent choice for compact electronic devices and components. With a continuous current capacity of 8.00 A and a typical contact resistance of just 30 mOhm, it ensures minimal energy loss, contributing to the efficiency of the system it is integrated into. The design incorporates advanced beryllium copper in the plunger, which guarantees durability and performance under various conditions while being plated in gold to enhance conductivity and resist oxidation.
-
Product
Back Pressure Tester
TU29P
-
Enables Technician to test exhaust back pressure thru oxygen sensor. Oxygen Sensor adapter includes M12 & M18 thread.Special Gauge has two multi-colored bands - idle and 2500RPM, with pressures shown in PSA and bar.
-
Product
8 Connector-Hole Back Extension
9401-BE
-
Semi-enclosed version of the cabling "doghouse" for the Hawk/PC chassis with rear panel punched to accommodate 8 50/37 pin d-sub connectors. Space is provided to mount the standard DG-style 100 pin edge connector paddles.
-
Product
Push Back Probes VF383B0001G05
1009567
-
The VF383B0001G05 Push Back Probes are precision-engineered components designed specifically for demanding applications where contact reliability is paramount. These probes, known by their model number VF3, boast a compact pitch of just 3.00 mm, making them ideal for use in tight spaces while ensuring functional accuracy under a temperature range of -45°C to +100°C. Their robust construction and advanced materials provide excellent durability, enabling them to perform efficiently even in harsh environments.
-
Product
Push Back Probe HVF100SHAT
1010181
-
The HVF100SHAT is a specialized push back probe, specifically designed to enhance connectivity and reliability in various electronic applications. As part of the HVF100 family, this probe boasts a robust design, with critical dimensions that support seamless integration into your projects. The original description highlights its role in performing essential functions while ensuring high durability and ease of use.
-
Product
Blazed Holographic Plane Gratings
-
HORIBA Scientific produces a wide range of holographic master gratings from which high precision replicas are manufactured.A blazed holographic plane grating is the choice for high resolution spectroscopy and applications where high efficiency, low stray light levels are of high importance.
-
Product
Plane Wave Converter
PWC200
-
The R&S®PWC200 Plane Wave Converter is a bidirectional array of 156 wideband Vivaldi antennas placed in the radiating near field of the device under test (DUT). The phased antenna array can form planar waves inside a specified quiet zone within the radiating near field of the 5G massive MIMO base station for realtime radiated power and transceiver measurements (EVM, ACLR, SEM, etc.).
-
Product
Plane Mirror Converter
10722A
Accessory Kit
The Keysight 10722A plane mirror converter modifies the use of the 10702A linear interferometer. With an additional 10703A reflector, the 10722A converts the 10702A into a 10706A plane mirror interferometer. With an additional 10723A high-stability adapter, the 10722A converts the 10702A into an 10706B high-stability plane mirror interferometer.
-
Product
Push Back Probes (VF3) VF306B300G05
1006281
-
The Push Back Probes (VF3) VF306B300G05, with order code 1006281, are high-performance basic contact probes designed to meet various demanding applications. Engineered for precision, these probes operate within a temperature range from -45°C to +100°C, ensuring optimal performance in challenging environments. With a pitch of 3.00 mm and continuous current handling of up to 8.00 A, these probes deliver reliable electrical connectivity and minimal contact resistance, typically at 30.00 mOhm. This makes them an excellent choice for applications that require accurate and durable connectivity.
-
Product
Push Back Probes (VF4) VF406B400G25
1002338
-
The Push Back Probes (VF4) VF406B400G25, with order code 1002338, is an essential component designed for high-performance applications, particularly in testing and probing scenarios. This model features a basic contact probe configuration characterized by its compact design and superior functionality, capable of operating within a temperature range of -45°C to +100°C. With a pitch of 4.00 mm and a total length of 69.70 mm, the VF406B400G25 ensures precise applications, while its robust construction materials, including Beryllium copper for the plunger and brass for the barrel, provide enhanced durability and reliability under various conditions.
-
Product
Single Plane Scanners
-
Specifically designed for retailers that require high performance in a compact, horizontal or vertical form factor, the single plane products are tailored for medium to high volume POS applications at an affordable price. These products are particularly effective for grocery, department, drug, do-it-yourself centers and general retail environments.
-
Product
Push Back Probes (VF3) VF317B270G15
1010459
-
The Push Back Probes (VF3) model VF317B270G15, part number 1010459, is designed as a basic contact probe that excels in versatile applications requiring precise measurement and reliability in challenging environments. Engineered to operate effectively within a temperature range of -45°C to +100°C, these probes ensure durability across extreme conditions. Their design features a pitch of 3.00 mm, making them suitable for detailed electronic interfacing where accuracy is paramount. With a maximum travel of 5.50 mm and a pointing accuracy of ±0.10 mm, users can expect exceptional performance in tight spaces, elevating their prototype designs to the next level.
-
Product
Push Back Probes (VF4) VF406B240G15
1002326
-
The Push Back Probes (VF4) VF406B240G15, identified by the order code 1002326, are expertly designed basic contact probes that excel in precision and reliability. With a pitch of 4.00 mm and capable of operating within a temperature range of -45°C to +100°C, these probes provide unparalleled performance in various applications. The continuous current rating of 10.00 A and a typical contact resistance of 30.00 mOhm ensure efficient electrical connectivity, making them a critical component in testing and measurement setups.
