Solder Paste Inspection
assures volume and area of paste application.
See Also: Solder Paste, Solder Paste Measurement, 3D Solder Paste Inspection
-
Product
Solder Cup Connector Kit
Y1139A
D-Sub Female Connector
Used to build custom cables for 34921/23/25/31/32/33/37/38 –50-pin Dsub female – 125 V
-
Product
Baggage and Parcel Inspection
-
Inspection of bags and parcels has to be effective, efficient, and meet the toughest regulatory requirements. Rapiscan® Systems products deliver on both levels.
-
Product
Soldering Station
SM-898D
-
*Using micro-processor PID program control technology, precise dual digital display hot air gun and the stability of the actual temperature of the soldering iron, fast automatic temperature compensation feature further enhanced temperatures.*The amount of wind, air flow, temperature soldering iron are adjustable.*The air gun holder is a magnetron (or light control), holding the handle when the system will automatically enter the working mode; handle is placed on the shelf when the system enters standby mode automatically.(One more than the 898D Auto Sleep off function)*System with automatic cold wind function, can prolong the life of the heating element.*This product uses "brushless fan" as a source of air, reduce noise, improve work efficiency
-
-
Product
Post-Mould Inspection Machine
IV-P1000
-
The IV-P1000 is a post-mould inspection machine best known for being a fully automatic vision inspection station and for having a user-friendly GUI for operator and recipe setup. This machine is best used to inspect packages for surface defects on top and bottom.
-
Product
01 With Soldering Eyelets | 6 Positions | M8
01-1xxx-00/30xx-6-0
-
Multi wafer compact selector with 60° detent angle, 4 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque
-
Product
37-Pin D-Type Male Solder Bucket
92-960-037-M
D-Sub Male Connector
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires. 37-Pin Female connectors can be directly mated to a corresponding Pickering Switching Module while Male versions can be used to interface to a Female cable assembly termination.
-
Product
Inspection Assist Software
-
RVI software is a must for streamlining your inspection processes and improving overall efficiency. Olympus inspection assist software provides support throughout the entire process, whether streamlining on-site inspections or assisting with remote report generation.
-
Product
Fixture and Software for Open/Leak Inspection
-
In addition to jigs and fixtures for probing conductors and electrode pads, NIDEC-READ provides specialized software for test point selection and log analysis.
-
Product
Offshore Inline Inspection
-
Data quality and first-run success represent the founding principles of NDT Global. By providing highly accurate results, in the first instance, our customers can have confidence in the inspection data to make fully informed decisions on future interventions - be that extending the inspection interval or making required repairs while, at the same time, also limit the requirement for costly verification's. Our latest generation of tools represent a step change in pipeline inspection accuracy and can significantly reduce overall project cost.
-
Product
X-ray Inspection System
JewelBox-90T/100T/110T™
-
All JewelBoxes deliver precision x-ray images of ultra-high resolution and grey scale accuracy without the aberrations of voltage blooming and image distortion prevalent in other systems.
-
Product
PHOTOMASK INSPECTION MACHINE
NEGATIVE FILM
-
Negative film and photomask inspection originated from the extensive use of printed circuit boards. Negative films and photomasks are used in large quantities. The early detection method is to use the "inspection light table" for inspection, which requires too much manpower and material resources, and manual testing may be due to eye fatigue and negligence.
-
Product
04 With Soldering Eyelets | 1 Wafer | 24 Positions
04-1xx3-00/30-xx
-
Very robust, multi wafer selector with 15° detent angle, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
-
Product
Foreign Material Detection And Inspection
-
Cantrell•Gainco offers the latest high-performance inspection and detection solutions from the world’s proven performers – Anritsu and Fortress Technology – with whom we’re partnering to deliver the best inspection capabilities to poultry plants across the United States.
-
Product
Thick Film Inspection
785
-
For thicker coatings such as coal tars, extruded and tape coatings, the Model 785 has a range of infinite voltage settings from 1,000 to 15,000 volts.
-
Product
Smart Inspection Station
SiS
-
Smart Inspection Systems LLC was born in 2010 in response to orthopedic manufacturers’ demands for faster inspection than their sister industries. Our signature product, the Smart Inspection Station™ (SiS™), is an automated turnkey inspection solution that yields comprehensive visual reports with complete geometric form and dimensional pass/fail in just minutes. The SiS™ is custom-configured per the client’s needs, yet versatile enough for simultaneous commissioning on multiple product lines. The product of years of refinement, the SiS™ gives comprehensive visual reports with complete geometric form and dimensional pass/fail in just minutes. Your SiS™ can be custom-configured according to your needs, but is still versatile enough for simultaneous use on multiple product lines. And best of all, every SiS™ purchase comes with ongoing support from L3I’s expert staff.
-
Product
Semiconductor Package Inspection System
-
NIDEC-READ GATS (Grid Array Testing System) series carry out open/leak circuit tests on semiconductor package (MCM/CSP/BGA).
-
Product
Sensor for Filament Inspection
EyeFI
-
EVT presents the EyeFI - the sensor for the inspection of filaments. The sensor contains two cameras with an Aptina sensor and S-Mount lenses. The cameras are perpendicular to each other. It is therefore possible to inspect two sides of the filament, which means that the EyeFI can detect if the filament is out-of-roundness. Additionally the errors and defects can be detected. For example the occurring flaws are point-shaped or partly flaked, or point-shaped and transverse, or also looking like a longitudial rib, or only spots in different shapes. The defects can be detected with the EyeFI sensor. The EyeFI contains board cameras with sensors from Aptina, the IoCap and an evaluation processor. The housing is about 14x10x4 cm in size. The IoCap is the image-capture-IO-board, which is designed and developped by EVT.
-
Product
Video Inspection Station with Measuring
VIS310
-
Video Inspection Stations are available with?or without on-screen measurement capabilities?and offer?an excellent way to evaluate or test small works or items in?difficult to access locations.? As todays electronic and mechanical systems keep getting smaller, it becomes impossible to test or measure these products with traditional methods. For many applications, from development to production testing, video based inspection can help maintain quality control. Many of these systems are used in labs for development or used in production for testing production samples.
-
Product
37-Pin D-Type Female Solder Pin HV
40-960-037-F-HV
D-Sub Female Connector
This connector is designed to allow users to directly terminate cables with soldered connections.
-
Product
Replacement Solder Tip Leadset for Use with D420/620
Dx20-SI-HiTEMP
-
The 90 cm HiTemp cables and Solder-In lead can be used for controlled situations where the differential amplifier module needs to be removed from the extreme temperature environment. Ideally suited for testing scenarios where the temperature can fluctuate from -40 °C to +105 °C.
-
Product
Industrial CT X-Ray Inspection System
X3000
-
The X3000 is North Star Imaging’s newest standard system. Whether you are inspecting small or large components, the X3000 is the best option for customers needing a compact system with unique capabilities generally available on a larger X-ray or CT system.
-
Product
Cylinder Inner Wall Inspection
-
The CylinderInspector is an optical, non-destructive inspection and measurement tool for cylinder surfaces.
-
Product
First Article Inspection Machine
Optima III FAI
-
Landrex Technologies Co., Ltd.
First Article Inspection Machine
-
Product
Ultrasonic Inspection System
PULD 40
-
The PULD-40 is a versatile and highly accurate ultrasonic inspection system designed to meet the needs of our customers.
-
Product
Vision Inspection Systems
-
We have available with us diverse array of Vision System. These systems are based on high-end technologies and meet the requirements of diverse sectors. Further, our systems are an epitome of quality and available at economical prices. Details of different systems.
-
Product
Optical Inspection Machine
3D AOI
-
3D AOI latest optical inspection machine 1. No part dead angle, 4-way projection, complete measurement 2. Part height measurement, accurate measurement of defects 3. Multi-piece inspection without additional program 4. DLP digital projection, program editable height measurement
-
Product
Customized Electrical Test Optical Inspection
-
Landrex Technologies Co., Ltd.
Customized Electrical Test Optical Inspection
-
Product
Automated LED Inspection and Testing
-
Landrex Technologies Co., Ltd.
Automated LED Inspection and Testing
-
Product
25-Pin D-Type Male Solder Bucket
92-960-025-M
-
This accessory is designed to allow users to directly terminate a cable with soldered connections to the connector. When the product is used without a backshell users should make their own cable strain relief arrangements and ensure appropriate electrical precautions are observed.
