Servo Test
-
Product
Network Testing Portfolio
TEMS™
-
The TEMS™ Network Testing Portfolio allows you to optimize the quality of your mobile network by concentrating on user experience. TEMS gives you the ability to walk test, drive test, and dynamically analyze your mobile network under the real-life conditions your users experience—indoors, outdoors, and around the clock.
-
-
Product
Magnetic-Field Test System
MTS-800
-
The MTS-800 is a compact test system for broadband generation and measurement of magnetic fields. Its internal components allow automatic EMC tests according to automotivestandards where high field strength need to be generatedor measured.
-
Product
Mixed Signal Test Systems
MTS1010i
-
The MTS-1010i is a more economical version of the MTS-2010i & MTS-1020i testers. It has a reduced platform size and reduced power supplies. Like the other testers in the MTS family it is a highly cost effective production ATE designed for testing high-volume linear and mixed signal semiconductor devices (Op Amps, high-voltage drivers, DAC, ADC, etc.), both at the wafer sort and final test stages of the manufacturing process.
-
Product
Battery Pack/Module Test Solution
-
Regenerative battery energy dischargeEnergy savingEnvironment protectionLow heat generateChannels paralleled for higher currentsCharge / discharge mode (CC, CV, CP) Constant current Constant voltage Constant powerDriving cycle simulationHigh precision measurement accuracyFast current conversionSmooth current without over shootTesting data analysis functionData recovery protection (after power failure)Independent protection of multi-channelBMS data recordingThermal chamber control integration
-
Product
Nanomechanical Test Instruments
-
Bruker has developed a comprehensive suite of nanomechanical and nanotribological test instruments that operate in conjunction with powerful microscopy techniques. Combining the advantages of advanced microscopy technologies with quantitative in-situ nanomechanical characterization enables an accelerated understanding of material behavior at the nanoscale.
-
Product
Bench Top Test Set
WesTest-3000/BTTS
-
Communications & Power Industries
*PXI Based*Test Requirements Driven*Cost Capability Consistency*Software Standards- ATML, IEEE
-
Product
Custom Test Stands
-
Our test stands and systems are manufactured to support hydraulic, fuel, pneumatic, and electro-mechanical components.
-
Product
CO Detector Testing
-
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and / or heat. Under international codes and standards the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
-
Product
Furniture Testing Machine
-
Dongguan Kejian Instrument Co., Ltd.
Suitable for family, hotel, hotel, hotel and so on use of all kinds of table kind of furniture factory finished table kind of furniture, chairs, stool kind of furniture and for adult use hard paving single bed impact test.Does not apply to test swivel chair and ceramic, cany willow materials production chair, stool kind of furniture.
-
Product
Automated Test System
-
Automated Test System is a production-ready solution that combines test software and various hardware for validation test in both manufacturing and R&D. The solution provides a high performance and cost-effective system based on National Instruments technology.
-
Product
Miniature Vibration Test System
G-2 Series
-
The G-2 Series Miniature Vibration Test System, though compact & handy, consists of a sweep oscillator, sine controller, power amplifier and vibration generator, thus suited to a variety of applications; calibration of sensors, standardized vibration tests for small parts, school teaching materials and modal analysis. The G-2002 is handy, with all the composed units being incorporated in a portable case.
-
Product
Universal Test Fixture
Series 48
-
The Series 48 Universal Test Fixture Systems are an effective way to test high mix, low to medium volume products. The Universal Base is designed around the CAMGATE Z axis Test Fixture. The base interfaces with removable, quick change Series 49 Universal Test Insert Kits. Three versions are offered, a blank base whereas the end user can configure the Base and insert kit to their own connector configuration, The 160 point model which uses four (40) pin IDC ribbon cable connectors to interface between the base and the insert kit, and the -I model that incorporates the same 4 block GR2270 style block interface as used on our Series 34 test fixtures. This allows for increased test point count and the use of Industry Standard 2270 style signal, power, and coax blocks. Rear panels can be custom configured to customer specifications, Virginia Panel ITA frames, or GR2270 Interfaces used on Semco’s Standard Product line
-
Product
Cyclic Durability (Fatigue) Testing
-
Today’s products are very complex and designed to minimize costs with the use of FEA software that can project fatigue hot spots. Using your analysis results, we can create a test plan that includes mechanical cyclic durability and environments that will best test your design.
-
Product
Battery Test System
WBCS3000Ls32
-
Low current model32 channel battery cycler (expandable up to 128 channels)No. of minimum channel : 16 channelsmax. voltage range : ±5Vmax. current range : ±10mA
-
Product
Network Performance Testing
-
From homes and offices through to production plants: everyone is looking at network service providers and equipment manufacturers to ensure outstanding network performance for work and play. Yet, what is ‘outstanding’ network performance’ all about?
-
Product
Portable Meter Test Systems
-
Zhengzhou SMS Electric Co.,Ltd
Portable energy meter calibration test devices.
-
Product
Localization Testing
-
Localization testing is a method that ensures that an application can be used in a specific area or region. It involves testing the application to verify the accuracy, behavior, and suitability in a specific geographical area.
-
Product
Tested Wireless Controller Software
AssureWave Testing
-
The AssureWave program provides stringent testing of client and application interoperability on Cisco''s Unified Wireless LAN Controller infrastructure.
-
Product
Fiber Acceptance Test Kit
23005
-
The unique design of the splice accommodates either 125um or 140um fiber and any size buffer up to 900um. The precision made splice holder firmly holds the pigtail in position without causing stress on the fiber. The low viscosity index matching liquid has an indefinite shelf life and allows for an easy glide of the bare fiber into the splice. Within seconds, a fiber acceptance reading can be made with an OTDR or test set. Low loss with minimum back reflection can easily be achieved for more accurate signatures. Other applications for this kit: splice training aids, bare fiber adapters, and temporary splicing.
-
Product
Run-time production test environment
XJRunner
-
XJRunner is the specialised run-time environment for executing pre-compiled XJDeveloper projects. With a range of special features it is particularly aimed at board manufacturers and in-field support.
-
Product
T1 E1 Testing
-
T1/E1 carriers are used extensively throughout the world for carrying large volumes of call containing both voice and data. Their popularity can be attributed to their high reliability, manageability and flexibility. The available digitized channels, 24 for T1 and 32 for E1 can be used for carrying voice and/or data. Further, the carriers can be used separately or they can be combined in order to provide higher transmission bandwidth.
-
Product
Compression Testing Machine
-
Jinan Scientific Test Technology Co. LTD.
Compression Testing Machine
-
Product
Manufacturing Test Only System
MTO
-
The MTO restricts access to test development and test files, yet enables users to run any predeveloped onTAP boundary scan / JTAG tests, including memory cluster tests and Flash programming, when activated. The MTO also provides access to ProScan, the graphical debugging environment for onTAP. Users have access to accurate pin-level diagnostics and debug features, such as the netlist browser, test reports, and low-level pin access for toggling pins, to speed up the manufacturing process and ensure accuracy.
-
Product
Battery Testing Chambers
-
We supply a variety of test chambers for testing small battery cells to large lithium ion battery packs. Battery test chambers are supplied to a variety of industries including telecommunications, computer and automotive. With the goal of reducing automobile emissions and the development of electric vehicles, the need for lithium ion battery testing is even more critical. Our proven experience provides the most cost-effective solutions. Each test chamber is built according to specific test requirements and may be interfaced with battery cyclers, control & monitoring data acquisitions systems and other test equipment for a complete integrated test solution. All environmental chambers are designed with safety in mind. A variety of safety features are provided for reliability and abuse testing of batteries. These features may be incorporated into CSZ test chambers and tailored to the various hazard levels of EUCAR (European Council for Automotive R&D), a consortium of European car manufacturers. To better assess the hazard potential of tests, EUCAR has investigated hazardous situations and divided them into eight risk classes. The development of the safety equipment of our battery test systems is also based on this classification. For each hazard level, we recommend specific safety options that can be included with your chamber to meet your specifications to safety test your product. Together with our customers, we assess which safety devices are necessary for the respective test chambers.
-
Product
Testing and Validation Services
-
With our testing and validation services, we help our clients test their products and materials to ensure compliance with the relevant standards and deliver comprehensive reporting on the results.
-
Product
Furniture Testing
-
We can test to ANSI/BIFMA or any government, military or industrial test standard. American Testing Laboratory can design a specific furniture testing program tailored to meet your particular needs.
-
Product
Test Pattern Generator Software
ScanExpress TPG
-
To deliver a product meeting the highest standards of quality and reliability, design engineers and test engineers alike must maintain test capabilities throughout the entire product life cycle, from prototype to manufacturing. Automation in test generation is essential to ensure that tests keep up with the rapid development of modern products.The ScanExpress TPG™ Intelligent Test Pattern Generator Software provides a highly advanced, automated boundary-scan test design environment—perfect for quick and efficient creation of complete boundary-scan tests for all IEEE-1149.1 and IEEE-1149.6 compliant circuit boards.
-
-
Product
Altitude Test Chambers
-
Altitude chamber testing is important for manufacturers of products that might be shipped via air. It is especially important for defense and aerospace applications where pressure and vacuum conditions are even more intense. Our altitude test chambers simulate a variety of environmental conditions including temperature, altitude, humidity, and vibration for the rigorous testing standards of combined environment.
