Product

PCI Express Optical Link Board

SIS1100-E2

-

Struck Innovative Systeme

SIS1100-E2 - Struck Innovative Systeme

The SIS1100-e2 is the follow up card to our SIS1100-eCMC board (without CMC carrier functionality). It was developed to extend the lify cycle of our PCIe to VME interface. For software/driver compatibility reasons we still employ the PEX8311 PCI Express to local bus bridge chip.

Product

Optical Power Meter

-

Shanghai Stone Communication tech Co., Ltd

Shanghai Stone Communication tech Co., Ltd

This optical power meter series is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. It has features of ingenious appearance, wide range of power measurement, high accuracy with high performance-to-price ratio.

Product

Fiber Optic Sensing Interrogator

RTS250+

-

Sensuron

RTS250+ - Sensuron

This unit provides users with up to 200 Hz sampling rate for up to 4 fibers, which is twice the speed of our proven RTS125+, the unit that was created in partnership with NASA to support the test and validation of their new vehicles.

Product

Optical Fiber 2×2 Switch

OFSW - 2 × 2

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 2 × 2 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW-2 × 2 is a 2 × 2 prism optical switch. It can support 2 optical fibers input and 2 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

PXIe, 2-Channel, 10 GHz PXI Optical to Electrical Converter

786544-01

-

NI

786544-01 - NI

PXIe, 2-Channel, 10 GHz PXI Optical to Electrical Converter—The CohSol O2EPXIe-1001-2 provides two DC-coupled photoreceivers that convert light with wavelengths from 750 nm to 1,650 nm into electricity at speeds up to 10 GHz. It offers multimode fiber with a 62.5 µm core and SC/PC, FC/PC, SC/APC, or FC/APC connectors. The CohSol O2EPXIe-1001-2 is ideal for reliable testing in manufacturing or research and development environments.

Product

Optics And Opto-Mechanics

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Goniometers, optical rails/benches/stands, lens tubes and light guides.

Product

6-Channel VME Buffered Electrical-to-Optical Converter

V720

-

Highland Technology, Inc.

V720 - Highland Technology, Inc.

The V720 is a six-channel logic-level electrical-to-optical converter, packaged as a single-width, 6U VME module. It may be used with compatible Highland optical receiver modules for fast, low-jitter, EMI-proof distribution of pulses, triggers, and precision timing signals.

Product

Fiber Optic Tests

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

SunmaFiber is a worldwide leading provider for fiber optic equipment, fiber optic test instruments and other data network & telecom products of communications, commercial, and consumer markets. The Company offers test and measurement systems and services to telecommunications service providers, cable operators, and network equipment manufacturers. In addition, the Company offers components, modules, and subsystems for Wireless, Telecommunication, Datacom, Power, Cable TV measurement instruments and utilities applications.

Product

Optical Spectrum Analyzers

FTBx-5245/5255

-

EXFO Inc.

FTBx-5245/5255 - EXFO Inc.

Robust In-service Pol-Mux OSNR for 100G/200G/400G (FTBx-5255). Industry’s only all-in-one OSA covering all applications: high speed (100G+ In-service OSNR, etc.), CWDM, O and L-band testing, etc.Portable solution for spectral characterization of DWDM/CWDM networks. Industry’s smallest OSA/transport solution in a single platform (FTB-4 Pro). Pol-Mux OSNR option compliant with IEC 61282-12 standard.

Product

High Power Fiber Optic Visual Fault Locator

VFL-700

-

Shanghai Fibretool Technology Co.,Ltd.

VFL-700 - Shanghai Fibretool Technology Co.,Ltd.

The VFL-700 is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in an optical network during and after installation.

Product

AFM (Atomic Force Microscope) Optical Platform

-

HORIBA, Ltd.

HORIBA, Ltd.

The AFM platform allows fully-integrated use of confocal Raman microscopy and AFM for Tip-Enhanced Optical Spectroscopies (such as Tip-Enhanced Raman Spectroscopy (TERS) and Tip-Enhanced PhotoLuminescence (TEPL)), but also for truly co-localized AFM-Raman measurements.The myriad of AFM (Atomic Force Microscope) techniques that allow study of topographical, electrical and mechanical properties can be performed with any laser source available in Raman spectrometer, or with other external illumination (e.g., solar simulator or other tunable or continuum source). TERS and TEPL can provide nanoscale chemical and structural information, making the AFM-Raman platform a two-way road; where complimentary techniques provide novel and unique imaging capabilities to each other.

Product

Light Measurement Optical Filters

-

International Light Technologies

International Light Technologies

Optical filters are often used to attenuate certain wavelengths of light and produce an overall desired detector response.

Product

3D Optical Profiler

Nexview™ NX2

-

Zygo Corporation

Nexview™ NX2 - Zygo Corporation

Designed for the most demanding applications, the Nexview™ NX2 3D optical profiler combines exceptional precision, advanced algorithms, application flexibility, and automation into a single package that represents ZYGO's most advanced Coherence Scanning Interferometric (CSI) profiler.

Product

950~2400MHz DVB-S 4 ways SAT-IF CWDM Optical Transmitter & Receiver

HDBS-4000CW

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HDBS-4000CW - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai HDBS-4000CW series is integrated 4pcs of SAT-IF CWDM standard wavelength optical transmitters with optical receivers in a casing. Through CWDM, Transmitter 4 ways optical multiplex (TX) or demultiplex (RX) through one fiber. It can be well used in transmitting a satellite VL, VH, HL, HH different polarize 4 way SAT-IF signal. It can be easily operated.

Product

Optical Power Meter

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

Optical Power Meter (OPM) is an essential fiber test instrument used for absolute optical signal measurement as well as fiber optic loss related measurement. The term usually refers to a device for testing average power in fiber optic systems. Fiber optical power meter is a tool for telecom and CATV network. This handheld optical power meter features ingenious appearance, wide range of power measurement, high accurate test precision and user automatic self-calibration function.

Product

High Voltage Optically Isolated Probe, 700 MHz Bandwidth. Includes soft-carrying case.

DL07-ISO

-

Teledyne LeCroy

DL07-ISO - Teledyne LeCroy

The DL-ISO enables highest confidence in GaN and SiC device characterization with highest accuracy, best signal fidelity, and comprehensive connectivity.

Product

Outdoor AGC Optical Node

SR812B

-

Hangzhou Softel Optic Co., Ltd.

SR812B - Hangzhou Softel Optic Co., Ltd.

SR812B optical receiver is our new development products that especially used in CATV network. The pre-amp adopts GaAs MMIC amplify module and the post-amp adopts GaAs power doubler amplify module .Support specifical attenuation and equalization inserts if you want.Or as per customer, adopts other module.With optimization design and plentiful technical experience that made this equipment with high performance specification. It is a ideal model for CATV network.

Product

Logger version CTD profiler with optical fast DO sensor

RINKO-Profiler

-

JFE Advantech Co., Ltd.

RINKO-Profiler - JFE Advantech Co., Ltd.

CTD profiler with optical fast DO sensor

Product

PXI Single 2 Channel Fibre Optic SC/PC

40-855-212

-

Pickering Interfaces Inc.

40-855-212 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

Fiber Monitoring System for Optical Networks

-

M2 Optics, Inc.

M2 Optics, Inc.

Detecting serious physical network infrastructure issues like accidental fiber cuts, intrusion attempts, and malicious tampering has never been easier than utilizing this Fiber Monitoring System available from M2 Optics. The first solution approach in the industry that was designed to minimize monitoring costs on a per-fiber basis, all the hardware and software are integrated into a single low-profile chassis for fast deployment to cover your critical links.

Product

1208/9a Optical Distribution, RX/TX

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

The ptf 1208A (transmitter) and ptf 1209A (receiver) provide a convenient and simple way to transmit high quality RF signals over long distances, without the concerns associated with electrical interference and pick-up.The ptf 1208A accepts an RF input in the range from 1kHz up to greater than 10MHz and provides a combination of 8 local, high isolation, RF distribution outputs and 4 optical transmission outputs for distances up to 2 kilometers.The ptf 1209A accepts an optical input (transmitted from the ptf 1208A) and provides 12 local RF outputs, either digital (TTL into 50 ohms) or low noise sine wave signals driving 1V rms into 50 ohms (with the PLL option), or both.These systems are especially designed to accommodate IRIG B DCLS, 1PPS and other RF signals in the range from 1kHz to 20MHz.The modular construction allows for a variety of input/output configurations to provide a fully tailored application solution.