Product

Integrated Optical Modulation Analyzer

N4392A

-

Keysight Technologies

N4392A - Keysight Technologies

The new Keysight N4392A is an ultra-compact, portable fully integrated optical modulation analyzer with a 15'' laptop-size screen. It is optimized for daily R&D work and designed for the most affordable performance verification in manufacturing and component test for 40/100G components, modules and systems. It is the first optical modulation analyzer that provides built-in performance verification and recalibration, extending the factory recalibration cycles significantly.

Product

Handheld Optical Light Source

X5002

-

Shinho Optics Limited

X5002 - Shinho Optics Limited

Optical Light Source X-5002 is new-type light source. It provides single to quad-wavelength output including 650nm visible light source and 850/1300nm wavelength for multi-mode fiber or 1310/1550 nm dual-wavelength for single mode fiber. Together with new-type power meter, they combine the accurate test solution for the optical fiber networks.

Product

100GHz Optical Add/Drop Multiplexer

OADM-1000 (100GHz)

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OADM-1000 (100GHz) - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai OADM-1000 100GHz optical add/drop multiplexer based on the mature thin-film filter technology, metal seal. With so much great features like low insertion loss, high isolation, wide pass band, flexible configuration and so on. This is the ideal parts for used in DWDM system Add/Drop special wavelength.

Product

Optical Oxygen Sensors

-

Process Sensing Technologies

Process Sensing Technologies

PST offer a range of factory calibrated optical oxygen sensors which measure trace and ambient oxygen levels using luminescence-based optical technology.The patented technology allows the range of sensors to produce low power operation, while offering a long lifetime.

Product

(9 PCS) 8 Noid Light Kit With Fiber Optic Noid Light Extension

3621A

-

Peaceful Thriving Enterprise Co Ltd

3621A - Peaceful Thriving Enterprise Co Ltd

*Kit packs in a deluxe molded plastic case.*Set includes: 8 Noid lights for testing GM PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, GM MULTEC 2 and BOSCH 2.*Plus one fiber optic Noid Light extension.

Product

Multi-Interface TDM, Optical, And Packet/IP Rackmount & Probe Test Platforms

mTOP™

-

GL Communications Inc.

mTOP™ - GL Communications Inc.

Most equipment manufacturers and large enterprises prefer rack-based test tools as they are compact and higher density form factor solution for testing, monitoring, and troubleshooting network conditions. GL’s Multiple TDM Optical and Packet (mTOP™) rack enclosure can house any combination of USB based test equipment which are easily deployed and securely fixed to an equipment rack to provide extraordinary scalability to test switches, routers and end-to-end networks. These rack based platforms incorporates the basic test unit along with the necessary PC hardware, Windows® 10 64-bit operating system and remote accessibility via scripting and remote desktop. There are no moving parts with the unit, so reliability and longevity are integral. GL’s latest mTOP™ Probe stand-alone hardware variant is an all-in-one self-contained test instrument. The mTOP™ Probe can include any of the multiple TDM Optical and Packet interfaces USB device combined with the PC into one single box. The comprehensive mTOP™ Probe hardware unit is designed for easier portability and convenient for field testing which incorporates the testing features for multiple interfaces along with necessary PC hardware in a single box. GL’s USB based test equipment - PacketExpert™ (Ethernet), tProbe™ (T1/E1), USB T3/E3 (TDM), Dual UTAs (Analog/Wireless), and LightSpeed1000™ (SONET SDH) to support multiple interfaces in a compact rack space or included in a portable Probe unit.

Product

Absolute Optical Inclinometer

A2T

-

U. S. Digital

A2T - U. S. Digital

The A2T is a single axis, digital gravity angle sensor. The A2T serves as a full 360 range absolute tilt sensing programmable level with either digital or analog output. Internally, a rotary bar coded disk is mounted to a weighted gravity driven wheel. A micro-controller strobes an LED to transfer the bar code image onto an optical linear array, then decodes the position every 2 mSec. Magnetic damping provides fast response and settling time while virtually eliminating overshoot and oscillations. An internal EEPROM stores field programmable parameters such as resolution, zero position, direction swap, and mode. This second generation design virtually eliminates the primary accuracy limitation of first generation inclinometers, which is sitation (hysteresis).

Product

Optical Fiber Identifiers

-

GAO Tek Inc.

GAO Tek Inc.

Optical fiber identifiers from GAOTek are ruggedly built and easy to use. Using this instrument, detect the presence of signals on optical fibers. For field technicians, fiber identifiers are an important tool. Instantly verify whether live fibers are connected or disconnected, and trace fibers from end to end.

Product

Optic Node With Amplifier

OX 755

-

Analog Systems

OX 755 - Analog Systems

Converts even weak Optic Signals to a high quality RF Signal. LED BAR Optic Level Display has been provided for ease of system maintenance. They are best suitable for Analog as well as Digital transmission to maintain BER, MER Characteristics.- High Quality Nodes cum Amplifier- Frequency 40 ~ 1000 MHz- Good Sensitivity of -11 dBm- RF O/P 110 dBµV at 0 dBm Optic I/P- High Voltage Surge Protection- LED Optic Level Display- Powder Coated Housing

Product

3D Automated Optical Inspection Systems

New 3Di Series

-

Saki Corporation

New 3Di Series - Saki Corporation

To handle today’s rapidly changing market trends, the system can handle complex inspection challenges such as high component mounting density areas containing highly miniaturized parts placed near much larger and taller component. With our new 3D AOI system, you can strengthen quality assurance and increase production efficiency.

Product

Sample Pretreatment For Optical Emission Spectrometry

-

Shimadzu Corp.

Shimadzu Corp.

Samples are taken from molten metal, thin sheet, semi-complete or complete products. When sampling molten metal with a ladle, small quantities of molten metal are poured into a casting mold. Unnecessary parts of the sample are removed using a grinder or a cutter. As particles from a grinder may contaminate the surface of the sample, a lathe or milling machine is used (not a grinder) to cut soft samples such as white metal. If trace elements are not being investigated, a grinder or belt sander can be used. However, to minimize contamination, the grinding wheel or belt should be changed for each sample. Samples excised from semi-complete or complete products must be at least 12 mm in diameter. Small rod-shaped samples can be analyzed using special equipment.

Product

Optical Fiber Identifier

BD-IF400D

-

Shanghai Baudcom Communication Device Co.,Ltd.

BD-IF400D - Shanghai Baudcom Communication Device Co.,Ltd.

BD-IF400DOptical Fiber Identifier is an important tool for optical maintenance, which isused for nondestructive fiber identification project. Meanwhile it also hasVisual Fault Locator module with fault location function. Useingthe macro bending technology on line for nondestructive testing, BD-IF400DOptical Fiber Identifier can measure the signal direction and power and avoidmisoperation resulting in interrupted lines.

Product

Optical Spectrum Analyzers

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines.

Product

Optical Light Sources

FLS100 Series

-

Shanghai Tarluz Telecom Tech Co., LTD

FLS100 Series - Shanghai Tarluz Telecom Tech Co., LTD

FLS100 Optical Light source could provide maximum 4 wavelengths in one unit, it is an cost effective solution to work with FPM100 series optical power for installing fiber optic network. The unit support Single mode and Multimode (50/125um or 62.5/125um MM fiber) optical cable in one unit. It could support FC, SC, ST, LC and 2.5mm universal optical connector.

Product

Ultrafast Nearfield Optical Microscope

Femtosecond NSOM

-

Del Mar Photonics, Inc.

Femtosecond NSOM - Del Mar Photonics, Inc.

Near-field Scanning Optical Microscope (NSOM) is a versatile tool for nano-characterization and nano-manufacturing.

Product

Optical Fiber 4×1 Switch

OFSW - 4 × 1

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW - 4 × 1 - Hangzhou Huatai Optic Tech. Co., Ltd.

OFSW-4×1 is a 4×1 prism optical switch. It can support 4 optical fibers input and 1 fiber output, channel switch. Wide operating wavelength range, low insertion loss and speedy switching rate, can use network trends configuration, network monitor and lab application.

Product

Fiber Optics

GEN II FOB

-

DG Technologies

GEN II FOB - DG Technologies

Fiber Optic converters Electrically isolate signals from the vehicle bus using common bridge and satellite modules interconnected with fiber optic cable for EMI and EMC testing.

Product

Optical Camera Trigger

-

MKS Ophir

MKS Ophir

The Optical Camera Trigger is an optical sensor that detects pulsed light sources and generates outputs to trigger a camera. The front aperture of the Optical Trigger must be directed at a light source that provides the necessary properties for trigger activation. (e.g. a laser flash lamp, a pick-off source from the main laser beam, or similar). The light source may be a direct or indirect pulsed waveform.

Product

Dual 2 X 2 Channel Optic Mux 850nm Multi

40-810-124-M

-

Pickering Interfaces Inc.

40-810-124-M - Pickering Interfaces Inc.

Pickering PXI Fiber Optic Multiplexers connect a single channel to one of two or four channels. They are available in single or dual multiplexer configurations supporting single-mode or mult- mode fiber.A wide choice of connectors types is available. The 40-810 multiplexer connects the optical channel by redirecting the optical signal into a selected output fiber.

Product

C-band Optical Spectrum Analyzer Mocule Specification

CA92001

-

UC Instruments, Corp.

CA92001 - UC Instruments, Corp.

UC INSTRUMENTS CA9001 Portable Optical Spectrum Analyzer