Product

High-speed Fiber Stretcher

PZ1

-

Paulsson, Inc

PZ1 - Paulsson, Inc

The PZ1 is the high-speed member of our family of fiber stretchers. It is a fiber wound piezoelectric element for use in a wide range of optical interferometric measurement and sensing system applications. Typical uses include open loop demodulation, sensor simulation, variable optical delay, general purpose fiber interferometry and large angle modulation of interferometric phase.

Product

3D Automated Optical Inspection

Zenith UHS

-

Koh Young Technology

Zenith UHS - Koh Young Technology

High-speed full 3D AOI that brings about a revolution in SMT process management Industry-leading speed for full 3D measuring inspection equipment skill solutions- Only solution in the industry to set inspection criteria according to IPC-610 standards- Performs defect diagnosis through measurement-based data and eliminates the causes of possible errors- Powerful 3D solder joint inspection

Product

Low to Modest Volume Clean, Inspect, Test

KI-TK034

-

Kingfisher International

KI-TK034 - Kingfisher International

1310/1550 nm source & power meter, inspection microscope, cleaning materials. Interchangeable MPO/APC, SC, LC connectors (EAR99 Restricted)

Product

Substrate Inspection Apparatus

-

Takaya Corp.

Takaya Corp.

The test system of the printed circuit board (mounting board) called the flying probe tester developed ahead of the world received high evaluation at the electronics manufacturing factory around the world, securing the top share of the industry and "Takaya of the board tester" We have established a firm position that.

Product

Optical Fiber Ranger

OFR300

-

Shanghai Tarluz Telecom Tech Co., LTD

OFR300 - Shanghai Tarluz Telecom Tech Co., LTD

OFR300 Optical Fiber Ranger is the most portable test instrument in the industry. It adopts the OTDR technical principles and integrates the powerful analysis software, which enables the OFR300 fiber ranger detect fiber faults location more accurate and easy.

Product

Test And Inspection

-

AFL

AFL

Test and Inspection

Product

Field Evaluation And Special Inspections

-

Nemko

Nemko

Nemko offers Field Evaluation and Special Inspection Services in the US and Canada as a fast and economical alternative to traditional product safety certification.

Product

X-Ray Inspection

-

Viscom AG

Viscom AG

X-ray inspection systems are used wherever defects need to be detected by non-destructive means. The spectrum of use is broad and ranges from quality controls for complex assemblies, to the testing of materials for cracks and air inclusions, to foreign matter inclusions and shape deviations. The trend toward miniaturization, higher packing densities, and the relocation of components to the interior of the assembly require precise X-ray inspections that detect hidden defects quickly and reliably. X-ray systems from Viscom are used for the inspection of series assemblies as well as sampling and prototype controls. They take care of typical inspection tasks in concealed areas such as void controls, THT filling level measurements, and HIP inspections. At the same time, the systems reliably determine defect features such as coplanarity and polarity – at high inspection speeds and in a cost-effective way.

Product

3D Solder Paste Inspection Machine (3D-SPI)

3Si Series

-

Saki Corporation

3Si Series - Saki Corporation

Saki's 3D SPI identifies critical defects and assists with process improvement.

Product

Launch Fiber Box

-

Diamond SA

Diamond SA

OTDR measuring devices are used in various ways in fibre optic technology. They enable extensive characterisation of existing fibre optic cabling networks. The use of launch and receive fibres is advantageous when it comes to ensuring precise results evaluations. With bidirectional backscatter measurements with launch and receive fibres, the attenuation values of the first and last plug-in connection can be determined precisely by averaging and device dead zones can be avoided. Measuring device manufacturers recommend different lengths of launch and receives fibres to avoid “phantom reflections”. These launch and receive fibres are also subject to measuring equipment monitoring and should regularly undergo revision in accordance with the OTDR measuring devices. A good measurement result depends on the state and quality of the measuring equipment used. Diamond offers various types of launch and receive fibres, one with standard telecommunications connectors and the other with an outdoor connector for harsh environments.

Product

Fiber Optic Connector Inspector

CI-1100

-

Lightel Technologies, Inc.

CI-1100 - Lightel Technologies, Inc.

Ergonomic designFast, easy focusOne hand operationInspect patchcords (male) and in-adapter connectors (female)Foldable monitor set with adjustable viewing anglePortable set with a charger and rechargeable batteriesChange tips in seconds

Product

Terahertz Imager for Material Inspection

T-SENSE FMI

-

HÜBNER Photonics

T-SENSE FMI - HÜBNER Photonics

This highly efficient technology is based on the most recent research results. Production can be monitored and controlled at various levels. T-SENSE FMI uses millimeter waves in the lower terahertz range with no health risks involved. This means that the equipment can be used anywhere and for several purposes without the need for radiation protection.

Product

Metrology & Inspection Systems

-

ASML

ASML

Our optical and e-beam wafer metrology and inspection products quickly and accurately measure pattern quality before and during high-volume chip manufacturing.

Product

OEM 1-Channel Fiber Optic Signal Conditioner PCB Module

FOTEMP1-OEM-MNT

-

Micronor Sensors

FOTEMP1-OEM-MNT - Micronor Sensors

The FOTEMP1-OEM-MNT is a small form factor PCB interface module designed for low cost insertion of high precision GaAs-based fiber optic temperature sensor technology into OEM applications where common electrical temperature sensors and thermocouples cannot be used. The OEM interface product is compatible with all TS series fiber optic temperature probes. The sensors are entirely non-metallic and electrically passive, providing immunity to EMI, RFI, MR, microwaves and radiation is required.

Product

Spectroscopy Fiber Probes

-

art photonics GmbH

art photonics GmbH

Spectroscopy probes for medical diagnostics and industrial process control, in volume production of fiber for medical and industrial lasers, for different fiber bundles, etc.

Product

Fiber Splitters & WDMs

-

Wuhan Sunma Technology Co., Ltd.

Wuhan Sunma Technology Co., Ltd.

Optical Splitter is used to split the fiber optic light into several parts at a certain ratio. It is an important component used in Passive Optical Network (PON), therefore also called PON Splitter. There are mainly two kinds of PON splitters: one is the traditional fused type splitter known as FBT Coupler or FBT WDM splitter, which features competitive price; the other is the PLC Splitter based on the PLC (Planar Lightwave Circuit) technology, which has a compact size and suits for density applications. SunmaFiber provides both PLC splitters and FBT coupler splitters for EPON/GPON Systems.

Product

Outdoor Fiber Cable

GYTS

-

Hangzhou Softel Optic Co., Ltd.

GYTS - Hangzhou Softel Optic Co., Ltd.

Loose tube style, optical fiber cable with metallic central strength member of steel wire/strand and moisture barrier inner sheathed. Cable protected by a black PE over sheath,  suitable for duct or aerial  application. Tubes  contain optical single-mode or multimode fibers color coded as per color coding  scheme.

Product

High Precision Angular Positioning, Calibration and Geometry INspection

LabStandard AIR

-

Rotary Precision Instruments UK Ltd

LabStandard AIR - Rotary Precision Instruments UK Ltd

Ultra precise rotary tables intended for fine inspection, metrology and test applications.The LabStandardAIR has been designed as a “Contact Free” system and eliminates features, which may detract from achieving the optimum rotational performance. The rotating elements are supported on super high precision, air lubricated, hydrostaticbearings and are not subject to disturbances associated with gear drives.

Product

Backplane Profiling & Inspection System

603d

-

Testronics Inc.

603d - Testronics Inc.

A major problem in the backplane industry is detecting bent connector pin defects. The most difficult being when the pin bends underneath the shroud rather than going into the hole. Many times this defect cannot be detected electrically as the connector pin is touching the conductive annular ring of the hole, allowing electrical test to pass. Unfortunately, it is an intermittent connection and will fail later on as there is not an actual mechanical connection.

Product

Easycheck Fiber Endface Inspector

CA3002

-

UC Instruments, Corp.

CA3002 - UC Instruments, Corp.

The integrated style design makes the size compact and operation easy. You are no longer to worry about so many cables between monitor and microscope, greatly saving the time for operation and worktable space, thus creating more productivity. Easycheck have a series different model according to different application, it has photo capture function; for transceiver checking; X、Y adjustable; image auto analysis and judgement, etc. The user can choose the desired model per the requirement.

Product

Fiber Optic Tool Kits

-

SYOPTEK INTERNATIONAL LIMITED

SYOPTEK INTERNATIONAL LIMITED

SYOPTEK has done fiber optic tool kit assembly for the fiber optic industry for over 8 years, from fiber optic cleaning kit to fiber optic tester kit, from fiber optic inspection kit to fiber optic splicing kit...providing kits that meet varying needs of customers, and withstand the rigors of field fiber optic application use.

Product

Dispersion Compensating Fiber

-

M2 Optics, Inc.

M2 Optics, Inc.

Dispersion compensating fiber from M2 Optics is used for correcting dispersion effects created over distances within G.652 single mode optical fibers.  Offered in a 19" chassis for rack or benchtop use, these high quality testing platforms are easy to work with and provide consistent, repeatable results.

Product

Real-time X-ray Inspection Systems

JewelBox Series

-

Glenbrook Technologies

JewelBox Series - Glenbrook Technologies

JewelBox x-ray inspection systems feature ultra-high resolution, powerful microfocus x-ray tubes, five-axis, and positioners. The JewelBox Series is divided into three broad categories: JewelBox 70-T, JewelBox 90-T and Ultra Compact each of which can be customized for specific applications.

Product

Thickness and Flaw Inspection

FOCUS PX / PC / SDK

-

Evident Scientific

FOCUS PX / PC / SDK - Evident Scientific

Olympus offers a complete advanced phased array integration solution that meets the requirements of your most demanding customers. The solution includes the FOCUS PX, a powerful and scalable acquisition unit; FocusPC, a powerful data acquisition and analysis software program; and three software development kits (SDK), FocusControl, FocusData, and OpenView SDK, to customize your software interface based on your application and control FocusPC for a fully automated inspection solution.