Product

Fiber Adapter

USB Serial Optical Converter

-

Coptonix GmbH

USB Serial Optical Converter - Coptonix GmbH

*Optical data transmission*Glass fiber or POF*Optimal galvanic isolation*USB bus-powered*Virtual serial interface*Baud rate up to 115kBit / s

Product

Magnetic Particle Inspection

-

Shanghai Xianda Denshijiki Industry Co.,Ltd

Shanghai Xianda Denshijiki Industry Co.,Ltd

Using the "leakage magnetic flux" phenomenon generated from the scratches, the magnetic powder (or fluorescent magnetic powder) of the ferromagnetic material scattered on the surface by magnetizing the specimen is adsorbed to the scratch. Observe this and detect scratches.

Product

Mini Fiber Optical Switch at Single Mode Latching 1310/1550nm 5V with LC/PC Connector

SUN-FSW-1x4

-

Guilin GLsun Science and Tech Group Co., LTD

SUN-FSW-1x4 - Guilin GLsun Science and Tech Group Co., LTD

GLsun 1*4 Optical Switch micaro optical switch informationFeatures•Low Insertion Loss•Wide Wavelength Range•Low Crosstalk•High Stability,High Reliability•Epoxy-free onOptical Path•Latching and Non-latchingApplications•F&D in Laboratory•System Monintoring•OADM•MAN(Metropolitan Area Network)•Network Security and MonitoringSpecificationsParameters Unit SUN-FSW-1×4Wavelength Range nm 850±40 / 1300±40 1260 ~ 1650Test Wavelength nm 850 / 1300 1310 / 1550Insertion Loss 1, 2 dB ≤1.0Return Loss 1, 2 dB MM ≥ 30 SM ≥ 50Crosstalk 1 dB ≥ 55PDL dB SM ≤0.1WDL dB ≤0.25Repeatability dB ≤±0.02Operating Voltage V 3.0 or 5.0Voltage Pluse Width(Latching) ms ≥ 20Durability Cycles ≥ 10 MillionSwitching Time ms ≤8Optical Power mW ≤500Operating Temperature ℃ 0 ~ +70Storage Temperature ℃ -40 ~ +85Relative Humidity % 5 ~ 95Dimension mm (L)33.5×(W)25.5×(H)9.5 ±0.2Note: 1 Within operating temperature and SOP.2 Excluding connectors.GLSUN 1x4 fiber optic switch micaro optical switch

Product

Fiber Optic Power Meters and Fault Locators

-

Fluke Networks

Fluke Networks

Fiber optic communication systems require the right tools to commission new links and to troubleshoot existing links. Fluke Networks has a wide range of Fiber Optic testing products to help certify that power losses are within standards and to troubleshoot broken and high loss links on single mode and multimode fiber. Fluke Network fiber optic tools are designed to be rugged and reliable, and to get the job done.

Product

High Precision Angular Positioning, Calibration and Geometry Inspection

LabStandard COMPACT

-

Rotary Precision Instruments UK Ltd

LabStandard COMPACT - Rotary Precision Instruments UK Ltd

Designed for horizontal or vertical applications with a high accuracy angular encoder ensures sensitivity and fine positioning for metrology and precision testing.

Product

400x Bench-Top Optical Fiber Microscope

FTM-400X

-

Shanghai Fibretool Technology Co.,Ltd.

FTM-400X - Shanghai Fibretool Technology Co.,Ltd.

With coaxial illumination optic magnify system, FTM-400X can easily find the slight defects and scratches on fiber endface. High resolution image sensor and 8"pure black and white digital TFT LCD can show the most real details of fiber endface.This is an integrated fiber endface inspector, it combines optical microscope and monitor in a body other than separate designs. It has clear images and long life time. it has series of adaptors for various kinds of connectors such as multi fiber connectors, optical components. It is an essential instrument for optical manufacturing.

Product

Inspection Kits

-

Elcometer Limited

Elcometer Limited

Elcometer offers one of the widest ranges of inspection equipment available. Our products are used across numerous industry sectors. In all cases, there is always a need to undertake a number of specific inspections during quality control assessments - as one parameter can affect another.

Product

Biofuels Testing and Inspection

-

Intertek Group plc

Intertek Group plc

Intertek delivers assurance, testing, inspection and certification services to refiners, producers, blenders, distributors, consumers and research institutes across the world.

Product

Fiber Optic Amplifier

-

Shanghai Pubang Sensor Co.,Ltd.

Shanghai Pubang Sensor Co.,Ltd.

1. High response frequency, detect with super high speed2. Suitable for detecting small objects3. Non-contact, non-destructive detection,can be used in harsh conditions4. Simple mounting by DIN connection

Product

Automated Optical Inspection (AOI)

-

Test Research, Inc.

Test Research, Inc.

Automated optical inspection (AOI) is an automated visual inspection of printed circuit board (PCB) (or LCD, transistor) manufacture where a camera autonomously scans the device under test for both catastrophic failure (e.g. missing component) and quality defects (e.g. fillet size or shape or component skew). It is commonly used in the manufacturing process because it is a non-contact test method.

Product

Power Transmission Line Inspection System

-

Shandong Senter Electronic Co., Ltd

Shandong Senter Electronic Co., Ltd

With the aid of high-end technology and equipment, Senter Electronic manufactures and trades high-tech power transmission line inspection system with low price. And we are known as one of the leading such manufacturers and suppliers in China for our quality products and good service. Welcome to buy the power transmission line inspection system with our factory.

Product

L-Band Separate Raman Fiber Amplifier

RFA6000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

RFA6000 - Hangzhou Huatai Optic Tech. Co., Ltd.

1. Erbium-doped Fiber Amplifier, due to the multiple cascades and the accumulation of noise caused by spontaneous emission, will reduce the system CNR greatly and thus it will limit the transmission capacity and distance of the system. Raman Fiber Amplifier (RFA) is a newly designed fiber amplifier based on Stimulated Raman Scattering (SRS) effect. It is considered as the core technology of new generation DWDM fiber over-long communication. Compared with Erbium-Doped Fiber Amplifier, Raman amplifier has the advantage of low Noise Figure (NF), wider gain bandwidth, flexible gain spectral region and stable temperature. It is the only device that can operate in 1300~1600 nm.

Product

Fiber Optic Temperature Measurement

-

Omega Engineering, Inc

Omega Engineering, Inc

Fiber Optic Temperature Measurement

Product

Miniature 12G/3G/HD-SDI Fiber Transport

SilverBULLET Series

-

Multidyne

SilverBULLET Series - Multidyne

Sometimes you just need that “silver bullet” - a simple solution that solves problems. Maybe it’s a quick connection to support temporary video and audio feeds, or perhaps just a rock-solid fiber-optic connection for single-link transport to and from a camera. MultiDyne’s SilverBullet Series offers an economical solution for broadcast-quality signal transmission on single-mode fiber. At just three inches, the SilverBullet offers a compact, interlocking architecture to ensure robust links that can fit just about anywhere. SilverBullets come in a compact carrying case that includes the DC power supplies. Ideal for a wide variety of broadcast and professional AV applications including field production, remote camera links, courtesy feeds, cross-campus production and pre-fibered venues.

Product

Qualicoat Powder Coating Inspection Kit

-

Elcometer Limited

Elcometer Limited

The aim of Qualicoat is to establish the minimum standard that plant installations, coating materials and finished products which have been powder coated must meet.Within this quality label, Qualicoat identifies a range of inspection requirements to be undertaken with regards to the quality control of powder coated products.The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of this organisation.

Product

RS-232 Fiber Optic Auto Powered Line Driver

Model 9271

-

Telebyte, Inc.

Model 9271 - Telebyte, Inc.

The Model 9271 RS-232 Fiber Optic Auto Powered Line Driver features a standard DB9 interface for maximum performance and reliability of data transmission over glass fiber, eliminating the need for serial to nine-pin adapters. In addition, it brings effective data communications to manufacturing environments. I

Product

Inspection Bundle

-

Euresys Inc.

Euresys Inc.

Cost effective bundle of eVision's inspection librariesIncludes EasyImage, EasyGauge, EasyMatch, EasyObject and EasyColor

Product

Optical BGA Inspection

-

Inspectis Optical Systems AB

Inspectis Optical Systems AB

Imaging hidden solder joints of BGA, IBGA, FlipChip, CSP, CGA and SMD components

Product

High Power Fiber Optic Visual Fault Locator

VFL-700

-

Shanghai Fibretool Technology Co.,Ltd.

VFL-700 - Shanghai Fibretool Technology Co.,Ltd.

The VFL-700 is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in an optical network during and after installation.

Product

Advanced 3D Automatic X-Ray Inspection

V810 S2EX

-

Kyoritsu Testsystem Co., Ltd.

V810 S2EX - Kyoritsu Testsystem Co., Ltd.

V810 is "3D Automatic X-ray inspection System" that corresponds to the double side mounting SMT-PCB that is not able to be checked by a transmission-type X-ray machine. It has the ability to detect a wide range of defects, and It have 100% complete defect detection capability in the Hip-defective.And, it is the inspection machine of world's highest level that combines the ability of the ultra-fast test speed and the lowest false call positives further.

Product

Inspection of Glue Dot Assembly

ScanINSPECT's ADI

-

ScanCAD International, Inc.

ScanINSPECT's ADI - ScanCAD International, Inc.

ScanINSPECT provides a simple and user-friendly alternative to inaccurate and time-consuming manual inspection methods or expensive, high-end AOI systems. ScanINSPECT uses a simple Windows user interface integrated with an automatic table and image-processing unit. This combination allows 100% inspection of adhesive placement on PCBs after dispensing.

Product

Laser Sherography NDT Sensor for Post-Production Quality Control or In-Field Component Inspections

FlawExplorer

-

Dantec Dynamics A/S

FlawExplorer - Dantec Dynamics A/S

The FlawExplorer is a laser shearography NDT sensor designed to be used for post-production quality control applications or in-field (in-service) component inspections. Depending on the application, the sensor can be configured with thermal or vacuum (partial) excitation systems and may also be automated. It incorporates the very latest in phase-shifting technology delivering accurate and reliable measurement results through clear and sharp imaging with sub-micrometer displacement resolution.