Filter Results By:

Products

Applications

Manufacturers

Showing results: 526 - 540 of 1035 items found.

  • Digital Pressure Gauge

    48165 - Hickok Inc.

    Heavy duty case and digital readout. More robust than analog gauges, no mechanical parts to go out of calibration.Remote Readings - Fluids stay at the test point. The 10' cord enables the readout to be inside the vehicle while fluids remain outside. No taping gauges to the window or worrying about fluid leaks.Min/Max feature captures road-test pressure drop-outs.Digital accuracy provides fast repeatable results during injector pressure drop tests.Large back-lit readout offers superior readability in low lighting or sunlight.Displays PSI, KPA, inHg and BAR, no need to convert measurements.

  • Galvanostat and Zero Resistance Ammeter

    ACM Instruments

    This instrument offers a Potentiostat, Galvanostat and Zero Resistance Ammeter with integrated Frequency Response Analyser and Sweep Generator in one. It is based around a two Amp Potentiostat teamed with a two Amp Zero Resistance Ammeter and can be supplied as - 6 channel, with six sequential channels, 8 channel (eight sequential channels) or 12 channel (twelve sequential channels). Connection to the controlling Windows PC is via a standard RS232 port, optically isolated for full floating operation. The instrument is supplied with a full set of cables and software, user manual and application notes on CD.

  • High Definition Arbitrary Waveform Generator

    T3AWG Series - Teledyne LeCroy

    T3AWG3K Series consists of six high definition high performance Arbitrary Waveform Generators (HD AWG) consisting of 2, 4 and 8 channels, 16 bit vertical resolution, 12 Vpp max output voltage (50Ω into 50Ω), 128 Mpts/ch memory (optional 1 Gpts/ch), a maximum sampling rate of 1.2 GS/s and a max sinewave frequency of 250 MHz and 350 MHz respectively. The baseline HW voltage offset capability provide the unmatched ability to generate ±24 V or 48V output voltage window (50Ω into High Impedance).

  • Network Protocol Analyzer

    Wireshark - Wireshark Foundation

    Wireshark is the world''s foremost network protocol analyzer. It lets you see what''s happening on your network at a microscopic level. It is the de facto (and often de jure) standard across many industries and educational institutions. Deep inspection of hundreds of protocols, with more being added all the time. Live capture and offline analysis. Standard three-pane packet browser. Multi-platform: Runs on Windows, Linux, macOS, Solaris, FreeBSD, NetBSD, and many others. Captured network data can be browsed via a GUI, or via the TTY-mode TShark utility.

  • USB Network Gate

    Eltima Software

    With USB Network Gate you will never experience any issues accessing and using the USB devices that are plugged into remote computers. You can work with those devices as if they were physically connected to your local machine. All that is needed to do for that is install USB over Network Connector on the computer with USB device physically attached (server) and on the computer where you want to use this device (client). USB over IP Connector will do all the rest. No additional hardware needed! BTW you can choose whether Mac, Linux or Windows machine will be a client or a server.

  • 50MHz BW, 50MS/s, 2-Channel PC-based Digital Storage Oscilloscope (DSO)

    PCS500AU - TEAM SOLUTIONS, INC.

    The PCS500AU is a digital storage oscilloscope that uses a computer and its monitor to display waveforms. All standard oscilloscope functions are available through the supplied Windows program. Its operation is identical to that of normal oscilloscope apart from the fact that all operations can be performed with the mouse. Connection is through the computer's parallel port and the scope is completely optically isolated from the computer port. The oscilloscope and transient recorder have two completely separated channels with a sampling frequency up to 1GHz. Any waveform displayed on the screen can be stored for later use in documents or for the comparison of waveforms.

  • ARINC 429 Test & Simulation Interface for PCI

    PCI-C429 - Avionics Interface Technologies

    4, 8, 16, or 32 Software Programmable Tx/Rx Channels - Programmable High/Low Speed Operation - Concurrent operation of all Tx/Rx Channels at high data rates - Full error injection and detection - Data capture filtering, 100% bus recording, and physical bus replay - Rate-oriented Label Transmission - Label Selective Trigger for Capture/FilteringIRIG-B time code encoder/decoder with free-wheeling modeApplication Interface supporting C/C++, C# and VB.NET Development - Device driver support: Windows, Linux (others on request) - Compatible with AIT’s Flight Simulyzer GUI Bus Analyzer Software

  • ATG Program

    FS-ATG - Flynn Systems Corp.

    FS-ATG is the world's easiest ATG program - pull-down menus, online help, and test generation wizard guide new users step-by-step through the process. It takes less than 2 minutes to 'point & click' a setup program for a board full of devices.Generates Vectors Faster Than EverFS-ATG is a 32-bit Windows 98/NT/2000 application that takes full advantage of today's powerful PC's. Small devices finish in seconds and most FPGAs / CPLDs, even the largest and most complex, can develop great tests after in just a few hours.

  • Bio-Threat Detection & Collection

    IBAC 2 - Teledyne FLIR

    The IBAC 2 is a fully automated bio-detection sensor that can support continual, 24/7, air monitoring or can be set to targeting sampling windows to align to hours of operation. It alarms in less than 60 seconds when a bio-threat is present. IBAC can be configured to support automated aerosol sampling either in conjunction with its’ triggered alarms or at a set frequency sampling time. In wide service throughout the world, IBAC 2 is used to collect and detect aerosolized agents for all four classes of biological threats (spore, viral, cellular, and protein toxins) with low false alarm.

  • Streak Camera

    OptoScope SC-10 systems - Optronis GmbH

    SC-10 systems are based on the SC-10 main unit and cover a very large range of applications thanks to their flexibility. With a time resolution of 2 ps, a very high temporal resolution streak system is available. The main unit itself uses a fused silica input window, maintaining sensitivity well into the UV range. Deflection units for triggered and synchroscan operation are available. The configuration with a second deflection unit for extension with an orthogonal time axis is also possible. SC-10 systems are well suited for applications in the field of time-resolved spectroscopy and offer a wide range of options for optical coupling.

  • Touchscreen Panel 1.9GHz PC for Harsh Environments

    PPC65B-1x series - WinSystems, Inc.

    Advanced IP65-rated Panel PC delivering high reliability and an extended operating temperature range in a thin, fanless design. The PPC65B series offers a rugged design for extreme environments and industrial IoT applications ranging from -20ºC to +70ºC. 1.9 GHz Quad-Core Intel® Atom™, E3845 processor, Up to 8 GB of RAM, Supports Linux, Windows 10 Operating Systems, Fast Graphics at High Resolutions • Five-wire resistive touchscreen • Resolution: 1024 x 768 / 1280 x 1024; 5 screen sizes 10.4" - 19".

  • PCI 4-Input Frame Grabber

    611 - Sensoray Co., Inc

    Color or monochrome: PAL, SECAM, NTSC, RS-170 compatible 4 composite video inputs or 3 composite and one S-video 8 TTL I/O lines for camera control Programmable AGC, hue, contrast, saturation Optional enhanced SDK for Windows 98/2000/NT/XP/CE Optional Linux and QNX drivers

  • Lab Master® Release & Adhesion Tester

    80-91 - Testing Machines, Inc.

    The Lab Master® Peel Tester for Release and Adhesion testing operates with Windows®-based software, and features the ability to create user-defined test set-up, individual test speed selection, user-definable default areas for analysis, exporting of graphs or data to Microsoft Excel and SPC programs, and enhanced calibration procedures.

  • Density Determination and Bulk Density

    infraTest Prüftechnik GmbH

    Consisting of 2 incremental displacement transducers 25 x 0.01 mm (measurement of volume change over path) with interface for connecting the displacement transducers with RS 232 C interface for PC, complete with Windows software with real-time display of uplift over time including trial database and option for log output.

  • 8 Channel 14 bit 100 MS/s Digitizer

    VX1724 - CAEN S.p.A.

    The VX1724 comes in a VME64X form factor with 8 input channels. The communication to and from the board is provided through the VMEBus and Optical Link interfaces. The VX1724 is a digitizer able to record waveforms along with performing advanced algorithms for online digital pulse processing (DPP) of pulse height analysis and dynamic acquisition window.

Get Help