Product

USB 4-Channel Frame Grabber

2255

-

Sensoray Co., Inc

2255 - Sensoray Co., Inc

Simultaneous capture from 4 NTSC/PAL video sources High aggregate capture rate: up to 120/100 fps (NTSC/PAL) Output formats: RGB/YCrCb, packed/planar Output resolutions: full/half/quarter frame Advanced deinterlacing eliminates motion artifacts Optional hardware JPEG compression available (please call for pricing) Hardware timestamps (1ms resolution) USB powered

Product

Xtium Frame Grabber Family

-

Teledyne DALSA

Teledyne DALSA

The Xtium series delivers higher bandwidth to sustain Camera Link 80-Bit modes over longer cable distances and supports a wide variety of area and line scan color and monochrome cameras, all in a compact, single slot solution.

Product

USB MPEG Frame Grabber

2250

-

Sensoray Co., Inc

2250 - Sensoray Co., Inc

MPEG1/2/4 and JPEG capture to USB from an analog video source at D1 resolution 30 fps NTSC, 25 fps PAL Synchronous audio capture from line (stereo) or microphone (mono) inputs Motion Detection Text overlay (OSD) Powered through USB SDK works with multiple units

Product

FireBird Camera Link 3U cPCI Serial Frame Grabber

AS-FBD-1XCLD-3CPCIS-2PE4

-

Active Silicon

AS-FBD-1XCLD-3CPCIS-2PE4 - Active Silicon

The FireBird Camera Link CompactPCI Serial card is a member of Active Silicon’s state-of-the-art FireBird frame grabber family. FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.

Product

4-Ports PCI Express PoE+ GigE Vision Frame Grab

PCIE-1674E-BE

-

Advantech Co. Ltd.

PCIE-1674E-BE - Advantech Co. Ltd.

Intel I350 1GbE Ethernet ControllerPCI Express Gen2 x4 compliantCompliance with IEEE 802.3at-2009 (PoE+), up to 2 ports delivers up to 25.4 W of power via power jet supply and protect by recoverable eFusePowered Device (PD) auto detection and classificationSupports IEEE 802.3u Auto-NegotiationSupports Jumbo frame (9,500 byte) and link aggregation

Product

Film Frame Test Handler

4170-IH

-

TESEC, INC

4170-IH - TESEC, INC

High throughput ・High withstand load, and high thrust table ・Expansion of the strip attachment area　：260(L) X 300(W) [Withinφ300mm for WLCSP]・LOT control by barcode/2D code reader ・Easy device type exchange only test socket and　display screen setting・Auto-cleaning function unit is installed to　clean the socket at any desired timing.・8/12 inches ring conversion ・S2/S8 regulation compliance・SEMI G85 compliance・SECS/GEM compliance

Product

Open Frame 6U 34HP Chassis

-

Kontron

Kontron

An open-frame solution for the open-minded engineer. With moveable rear profiles (up to 2.5mm,) 3U and 6U backplane compatibility options, air or conduction cooling options and the ease of fast and simple backplane interchangeability for fluid transition between VITA and PICMG bus architectures, the Hartmann Open Frame Chassis solution is the tool for customers who need versatility, accessibility and longevity.

Product

FireBird Camera Link Frame Grabber (2xCLM-2PE8)

AS-FBD-2XCLM-2PE8

-

Active Silicon

AS-FBD-2XCLM-2PE8 - Active Silicon

FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.

Product

Phoenix Camera Link Frame Grabber (D24-PE1)

AS-PHX-D24CL-PE1

-

Active Silicon

AS-PHX-D24CL-PE1 - Active Silicon

Phoenix-D24CL is a PCI Express board for the acquisition of digital data from a variety of Camera Link sources, including digital frame capture and linescan cameras. It supports all the formats of Base configuration, i.e. single 8- to 16-bit data, through 8-bit RGB, to dual tap 12-bit sources.

Product

Phoenix Camera Link Frame Grabber (D48-PE4H)

AS-PHX-D48CL-PE4H

-

Active Silicon

AS-PHX-D48CL-PE4H - Active Silicon

Phoenix-D48CL x4is a PCI Express board for the acquisition of digital data from a variety of Camera Link sources, including digital frame capture and linescan cameras. It supports all the formats of the Base and Medium configurations, i.e. single 8- to 16-bit data, through 12-bit RGB, to four tap 12-bit sources, as well as dual Base configuration, i.e. acquisition from two asynchronous Base cameras.

Product

MBoS Support Frame For 40-924-001 Or 60-102C-001 Chassis

95-901-005

-

Pickering Interfaces Inc.

95-901-005 - Pickering Interfaces Inc.

Frame assembly for mounting a Pickering 40-924-001 PXI or 60-102C-001 LXI chassis in the Modular Breakout System.

Product

Xcelera Frame Grabber

Xtium-CLHS PX4

-

Teledyne DALSA

Xtium-CLHS PX4 - Teledyne DALSA

Building on the field proven capability of Teledyne DALSA’s Xcelera frame grabber series, the Xtium™-CLHS PX4 is based on AIA’s CameraLink HS standard and uses PCI Express™ Gen 2.0 expansion bus to deliver high speed image acquisition and image transfer to the host memory. Xtium-CLHS uses industry standard CX4 cable to delivery up to 2.1 GB/s of image acquisition over a single cable to go beyond 15m and host transfer speeds of up to 1.7GB/sec - all in a compact, half-length, single slot solution.

Product

FireBird Camera Link Frame Grabber (1xCLD-2PE8)

AS-FBD-1XCLD-2PE8

-

Active Silicon

AS-FBD-1XCLD-2PE8 - Active Silicon

FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and low-latency image data transfers.

Product

CL+ PX8 Full Frame Grabber

Xcelera-CL+ PX8 Full

-

Teledyne DALSA

Xcelera-CL+ PX8 Full - Teledyne DALSA

The X64 Xcelera-CL+ PX8 Full has been built within Teledyne DALSA’s Trigger-to-Image Reliability technology framework. Trigger-to-Image Reliability leverages Teledyne DALSA’s hardware and software innovations to control, monitor and correct the image acquisition process from the time that an external trigger event occurs to the moment the data is sent to the host, providing traceability when errors do occur and permitting recovery from those errors.

Product

Frame Grabber

Alta-AN

-

BitFlow, Inc.

Alta-AN - BitFlow, Inc.

The Alta-AN is an affordable, versatile analog product family for Semiconductor and Industrial Vision OEMs. This family can acquire from almost any analog camera on the market, from high speed asynchronous-reset monochrome cameras to super high resolution color HDTV cameras. The Alta frame grabbers are high-quality, flexible, PCI Express bus imaging products, well supported by an easy-to-use SDK, and drivers for most popular software imaging packages.

Product

Open Frame Panel PC

PPC3-12-413

-

WinSystems, Inc.

PPC3-12-413 - WinSystems, Inc.

The PPC3-12-413 from WINSYSTEMS utilizes the E3800 family of Atom™ processors from Intel® to provide low power and high performance in a compact 12.1-inch Panel PC. Designed for harsh environments and reliability, the design includes fanless operating temperature ranges from -10ºC to +70ºC.

Product

High-Throughput Film Frame Handler

MCT FH-1200

-

Cohu, Inc.

MCT FH-1200 - Cohu, Inc.

FH-1200™ film frame test handler is designed to handle leadless devices mounted on film frame, such as QFN, DFN, WLCSP, BGA, µBGA and eWLB packages. The FH-1200 enables high parallelism testing of post-saw IC devices at ambient temperature. It can accommodate 200 mm and 300 mm wafer rings and custom shapes onto which multiple strips can be mounted. No change kits are required regardless of package size (if same frame is used).

Product

1-Port PCI Express Camera Link, Base Frame Grabber

PCIE-1121B-AE

-

Advantech Co. Ltd.

PCIE-1121B-AE - Advantech Co. Ltd.

Half-Size PCI Express Board Gen 2.0 x4Camera Link clock up to 85 MHzSupports 1 Base CL cameraBoth CL and I/O connector on one bracket (only one slot needed)Supports PoCL and non-PoCL cameras with SafePowerImage sizes up to 268,435,456 x 16,777,216Independent I/O (trigger, encoder, strobe, etc) for each camera

Product

MIPI M-PHY V5.0 Receiver Test Software (Frame Generator)

N5991MM5E

-

Keysight Technologies

N5991MM5E - Keysight Technologies

Generate MIPI M-PHY 5.0 sequences and signaling at HS-GEAR5 and lower speeds, for debugging, troubleshooting, and conformance test purposes, using the N5991MM5E Frame Generator software, for the M8040A BERT platform.

Product

Login Digital Epstein Tester Model

Model EP400

-

Gopal Electronics

Model EP400 - Gopal Electronics

Digital Epstein Tester EP-400 is designed to measure AC magnetic properties of flat rolled magnetic materials at high frequency by using Watt-meter, Ammeter, Voltmeter and Source. Epstein bridge test method is a fundamental method for evaluating the magnetic performance of flat-rolled magnetic materials in either sheared or stress relief annealed condition. This test method is suitable for design, specification acceptance, service evaluation, and research and development.

Product

Full-Featured Video Frame Grabber

Nexeon HD

-

dPict Imaging, Inc.

Nexeon HD - dPict Imaging, Inc.

Nexeon HD is a full-featured video frame grabber for high-definition video display and capture. It supports video inputs from standard and HDTV resolutions as well as VGA display. Nexeon HD has a flexible input interface complete with an HDMI compatible receiver and supports both analog and digital DVI/HDMI standards.

Product

Frame Grabbers

-

Teledyne DALSA

Teledyne DALSA

Teledyne DALSA delivers the industry's most reliable and versatile family of frame grabbers combining industry leading performance with industry leading feature sets, great value and extensive camera support. Board-level innovations deliver Trigger-to-Image Reliability significantly increasing system performance and ultimately helping to increase yield, while CamExpert, the camera configuration utility included with our free Sapera LT SDK, leverages the power of our acquisition boards in one of the industry's most efficient and easy to use interfaces.

Product

CL MX4 Frame Grabber

Xtium-CL MX4

-

Teledyne DALSA

Xtium-CL MX4 - Teledyne DALSA

Building on the field proven capability of Teledyne DALSA’s Xcelera frame grabber series, the Xtium™-CL MX4 is based on industry standard PCI Express™ Gen 2.0 expansion bus to deliver high speed access to host memory. The new Xtium series offers higher bandwidth to sustain Camera Link® 80-Bit modes over longer cable distances and supports a wide variety of area and line scan color/monochrome cameras, all in a compact, half-length, single slot solution.

Product

Frame Grabbers

Domino Series

-

Euresys Inc.

Domino Series - Euresys Inc.

The Domino series is a range of high-end PCI and PCI Express frame grabbers for analog cameras. They support any system function associated to industrial acquisition, such as camera asynchronous reset, exposure and strobe control. The latest Domino boards - Melody, Harmony and Symphony PCIe - are based on an innovative proprietary technology called D Technology*. It provides a perfect digital image with the benefits of a proven analog environment: low-cost, reliable cabling and connections, smallest cameras, low power,

Product

Frame Grabbers

Coaxlink Series

-

Euresys Inc.

Coaxlink Series - Euresys Inc.

Ultimate in performance with superior value CoaXPress frame grabbers

Product

4-Port PCI Express USB Vision Frame Grabber

PCIE-1154-BE

-

Advantech Co. Ltd.

PCIE-1154-BE - Advantech Co. Ltd.

Half-Size PCI Express Board Gen 2.0 x4 delivering 2.0 GB/s total bandwidthHost Controller – Renesas μPD720202Supports four USB 3.0LED indicator for each portSupports 900-mA max. current per portSupports cable-lock mechanism for reliable cable connectionSupports Microsoft Windows 7/8.1/10 and Linux