Serial Front Panel Data Port
-
Product
HSI Test Panel
TA-525
-
This test panel duplicates the original KTS153 panel and will completely test the KI525 instrument. Panel is built as layed out in the units overhaul manual to allow by the book testing.
-
Product
15.75 (400.05) 19" Perforated Panel
P-1519P
-
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
Product
DGS-65 Test Panel with FV Simulator / Bed of Nails
TA-650
-
The TA-650 is a new test fixture that will give any instrument shop the ability to conduct more detailed testing of the Collins DGS-65 directional gyro then was previously available.
-
Product
Solar Panel Chamber
-
Specifically designed for the solar industry, these climatic chambers feature specifically designed fixtures to properly measure almost any component related to solar panels including the actual panels, grid-tied photovoltaic inverters, or photovoltaic cells and modules.
-
Product
ARINC 615A Data Loader Software Kit
F-SIM-LDR-615A
-
Avionics Interface Technologies
The F-SIM-LDR-615A software application is an ARINC 615A data loader tool which is compatible with AIT’s family of ARINC 664 interface modules and standard LAN interfaces available on most PC’s. The F-SIM-LDR-615A application supports ARINC 615A load operations over Ethernet and ARINC 664 networks.
-
Product
Anemometer-Thermometer Data Logger
HD2103.2
-
Anemometer-Thermometer data logger which use hot-wire or vane probes to measure air speed, flow rate, and temperature inside pipelines and vents (for temperature Pt100 sensor with SICRAM module).
-
Product
Digital Panel Mount Load Cell Meter
MODEL DPM-3
-
The DPM-3 is a smart Plug & Play TEDS IEEE 1451.4 compliant Digital Panel Mount Load Cell meter. Just plug in a TEDS compatible Load Cell or Torque Sensor and the DPM-3 will automatically self-calibrate. When used with a non-TEDS Load Cell or Torque Sensor, the DPM-3 can be set up by simple front panel push buttons. The DPM-3 can be scaled to a full 5 digit display from 0 to 99,999 counts to read directly in engineering units such as grams, ounces, pounds, etc. The DPM-3 samples 60 readings per second (50 for 50Hz operation) for fast control response and true peak/valley reading capability. The meter has an adaptive digital filter that can automatically select the best time constant for minimum noise, yet respond rapidly to an actual change in signal level. The peak and valley values can be displayed by a push of a button on the front panel. Auto-tare allows the meter to be set to zero for any input signal level. Available options include dual relays, analog output, serial communications, and low voltage power supply.
-
Product
4 Ports 1GbE RJ-45 Module
NMC-0121
Network Mezzanine Card
Ideal for network segmentation applications and inline security monitoring. 1x Intel® i350_AM4, 1 x PCIe x4, Gen2.
-
Product
M-7000 Modbus RTU Remote Data Acquisition Modules
-
M-7000 data acquisition remote I/O modules are similar to our I-7000 modules and support both Modbus RTU and DCON protocols. They come in a wide variety of analog and digital configurations. The analog and digital I/O types they support include: current, voltage, thermistor, thermocouple, frequency, relay, strain gauge, etc.
-
Product
Thermometer Hygrometer Data Logger
S3120E
-
Data logger is designed for record of temperature and humidity. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper communication adapter.
-
Product
PXI 32 Channel I/O Serial I/P Prog Threshold
40-412-001
Digital I/O
The 40-412 is a 32-channel Digital I/O module with high output voltage and current capability and a dual variable threshold input. Each of the 32 channel outputs can be used to drive the output high or low using a high current capacity drive capable of sourcing 0.4A from the high side or 0.5A sink on the low side for each channel. The module is available in two versions with either serial or parallel capture of the input levels
-
Product
Subsea Data Logging Tensile Link
SUBD-3.0
-
The Subsea Data logging Tensile Link is a robust Tensile Link used for measuring loads on subsea mooring lines, underwater deployments and other similar applications. The instrument measures and records the applied load using an internal data logger which was developed by DLM Design Engineers.
-
Product
24.50 (622.30) 19" Perforated Panel
P-2419P
-
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
Product
Digital and Serial I/O
-
VadaTech’s wide range of ATCA Rear Transition Modules (RTMs) and MicroTCA I/O AMCs make it easier to integrate these standards-based building block systems into your network or application.
-
Product
Motor Testing Panels
-
Aarohi Embedded Systems Pvt. Ltd
AAROHI Filly and Partially Automatic Motor Testing Panels
-
Product
Multi-Port Serial
VXC-112iAU
-
The VXC-112 series card provides 2 RS-232 serial ports. It is equipped with a 128-byte hardware FIFO for each port, supports for speed up to 115200 bps and supports full-duplex communication.
-
Product
Premium Data Loggers with 1-4 Channels
-
Premium Data Loggers for temperature, humidity, co2, atm. Pressure, voltage, current, pulse and 2-state inputs.
-
Product
Wi-Fi Data Acquisition
-
Catering to the 802.11 network infrastructure and Internet of Things (IoT), ICP DAS USA Wi-Fi DAQ modules offer an easy way to incorporate wireless connectivity into monitoring and control systems. They support Modbus TCP and UDP protocols, which allows seamless integration into SCADA software and easy access for users anytime and anywhere. Our Wi-Fi data acquisition I/O modules can be used with our FREE EZ Data Logger Software for data logging and data acquisition applications.
-
Product
Compliant Data Loggers
21CFR
-
A selection of 21CFR Complaint Data Loggers, specifically developed to meet the data security required by the FDA's 21CFR part 11 regulations. As such these data loggers are suitable for use in applications where the integrity of the data is of the highest importance.
-
Product
Thermocouple Thermometer – 2 Inputs – Data Logger
HD2128.2
-
Thermocouple thermometer for probes type K, J, T, R, N, S, B, E, two inputs.
-
Product
Front Access Micro Computer, Intel 10th Gen
AIMC-3405
-
Front Access Micro Computer, Intel 10th Gen Core i CPU (LGA1200), 6 COM, 4 USB, and 4 Expansion slots. Desktop CPU computing performance with smart fan control. Rich and single side I/O on the front for easy maintenance, PCIe slots for add-on card expansion.
-
Product
I-8000 Analog Data Acquisition Modules
-
ICP DAS offers a versatile array of analog, cartridge based I/O modules to meet the precise needs of sensitive data acquisition applications using I/W-8000 controllers. ICP offers a bevy of thermistor, thermocouple, RTD, strain gauge, and universal I/O, as well as high resolution analog output modules! Please note that more modules are available in the "serial 87k section".
-
Product
Process Improvement & Data Management
-
ATA offers implementation leadership to aerospace companies as they begin to deploy the Siemens Teamcenter for Simulation and NX Advanced Simulation tools. ATA's staff is experienced in developing workflows and streamlined processes for analysis teams working in a data managed environment. We provide experts in aerospace analysis who can both facilitate the implementation process with the tool leaders and also support project work while your analysts begin working with their new tools. The result of ATA's support is a quicker understanding of where your company wants to go with less frustration for the engineers involved.
-
Product
Environmental Weather Station / Data Logger
-
Pratt & Whitney Measurement Systems, Inc.
Customizable Display – display any combination of the following outputs
-
Product
High-Resolution ER Data Logger
MS4500E
-
The MS4500E is a hand-held, battery-powered, corrosion meter capable of measuring and storing data from all types of electrical resistance (ER) corrosion probes. The instrument is light weight, microprocessor-based, and features a simple, menu-driven interface using a keypad and a backlit graphical LCD display.
-
Product
26 lane, 26 port, PCI Express
PEX88024
-
The new PEX88000, PCIe Gen 4.0 switch family builds on the longevity of the PEX series of switches, now spanning 12 families. The PEX88024 switch allows Data Center and Cloud Providers to build flexible, scalable rack infrastructures, along with other advantages such.
-
Product
Multiprotocol Serial Boards
104-COM-8SM-T
-
This is an eight-, four-, or two-port, asynchronous, serial communication board designed for use on the PC/104 bus. It supports RS-232, RS-422 or RS-485 communications. The board may be installed in any standard PC/104 stack. Connections are made via two 40 pin IDC type right angle connectors. Common applications include POS, gaming systems, machine monitoring, military and high-density networking.Type 16780 UARTS are used as the asynchronous communication elements.
-
Product
Electronic Compass Kit with Serial Cable & Revolution PC Software
E-value-ation Kit
-
All of our electronic compasses are available à la carte or combined with software and cables. We offer an E-value-ation Kit which includes a housed compass module, a serial cable, Revolution PC software, and a user’s guide. For these kits, you will need a PC or laptop that has a nine-pin serial or USB connection.
-
Product
4 Serial Communication Channels, Programmable RS-232/422/485, Isolated
SC5
-
Serial Communication Module SC5 provides up to 4 high-speed, programmable RS-232/422/485, individually isolated communication channels. Each channel is programmable for either RS-422/485 (differential, DF) or RS-232 (single ended, SE) hardware level interfaces. Individual channel isolated returns are available as part of the channel user interface signal set (for SE or ISO-GND reference).
-
Product
Pulse Instruments Data Acquisition and Test Software
PI-DATS
-
PI-DATS is Pulse Instruments Data Acquisition and Test Software, our user-friendly system software that allows complete control over Pulse Instruments test systems and test equipment. PI-DATS can dramatically increase your testing productivity by decreasing the amount of time it takes to set up and change test plans.
