Product

Isolation Transformers

-

Osborne Transformer Corp.

Osborne Transformer Corp.

Osborne’s Isolation Transformers are used to step-up, step-down and isolate voltages in single phase circuits. Isolation may be used to provide output circuit immunity from voltage spikes and noise (both common-mode and transverse-mode) present on the input system. The isolation can allow separate grounds on both the input and output sides of the transformer. Osborne also designs with a range of electrostatic shielding to provide several levels of noise immunity.

Product

Frequency Standard Products

-

ESE

ESE

The ES-110 generates a stable source of 10 MHz using GPS (Global Positioning System) satellites as a reference. If frequency distribution is needed, we offer the ES-210, a Quad 1x6 1/5/10 MHz Distribution Amplifier. The ES-210 provides four independent 1x6 Frequency DAs in a single rack-mount enclosure. The ES-410 is a four output version of the ES-110. The ES-410 was introduced and won Radio Magazine's Best of Show Award at the 2016 NAB Show.

Product

ACCUplace Macro Calibration Standard

AP-M Series

-

Applied Image, Inc.

AP-M Series - Applied Image, Inc.

With both X & Y axis metric scales, these dual axis targets are ideal for calibrating optical magnification in microscopes, linear distance, stage motion and squareness. In addition, with the larger area calibration scale, the calibration of low power optical systems over the longer distances can be easily carried out. The AP-M is offered on two standard materials; Glass (CG) and Opal (OP).

Product

Open Standard Module (OSM)

ROM-2860

-

Advantech Co. Ltd.

ROM-2860 - Advantech Co. Ltd.

Advantech ROM-2860 OSM 1.1 Computer-on-Module is powered by Qualcomm QCS6490/5430 SoC which includes up to Arm v8 Cortex® in combination with Andreo GPU 643 and Andreo VPU 633 graphics engine. It provides PCIe, USB 3.2, Giga Ethernet, MIPI-CSI, I2C, SPI, GPIO, PWM and eDP, DP, MIPI-DSI display for embedded applications.

Product

Fourier Transform Infrared Spectroscopy (FTIR)

-

Rocky Mountain Laboratories, Inc.

Rocky Mountain Laboratories, Inc.

FTIR Analysis is used to analyze organic materials. Bulk and small particle materials can be analyzed. FTIR microscopy analysis allows for the identification of particle as small as 10 µm.

Product

ZS4000 Standard Accessory Pack

PK-ZS4000

-

Teledyne LeCroy

PK-ZS4000 - Teledyne LeCroy

ZS4000 Standard Accessory Pack

Product

Standard Gain Horn Pyramidal Horn Antenna

-

ELVA-1

ELVA-1

Elva’s SGPH series of standard gain horn antennas cover the frequency range of 18 to 220 GHz in ten waveguide bands. They can be issued with rectangular or circular waveguide. Lens technology significantly allows decreasing mechanical sizes of horns and correcting beam for the best performance. These horns are ideal solution for measurement gain of other antennas, short range radars and radiometers.

Product

Single Or Dual Stream MIL-STD-1553 A/B &4, 8 Or 12 Channel ARINC429 Mixed ProtocolTest & Simulation Module For Standard Ethernet

ANET-MxAy

-

AIM GmbH

ANET-MxAy - AIM GmbH

Single or dual stream MIL-STD-1553 A/B and 4, 8 or 12 channel ARINC429 mixed protocol Test & Simulation module for standard Ethernet. The ANET embedded Linux operating system gives the unique capability to run the optional PBA.pro Engine right in the box.Another option is the ANET-ADK onboard software development kit where users create runtime applications (e.g. MIL-STD-1553 to Ethernet Converter / ARINC429 to Ethernet Converter , MIL-STD-1553 to Ethernet Gateway / ARINC429 to Ethernet Gateway) to execute right in the box. For wireless applications an ANET compatible USB Wifi dongle is optionally available. The capability to execute Python scripts in the ANET is a standard feature. For applications with multiple ANET devices AIM offers the ADock ANET docking station to host up to 4 ANET modules.

Product

Standard Step Tablets, Gray Scales & Density Reference Charts

-

Applied Image, Inc.

Applied Image, Inc.

Standard Step Tablets, Gray Scales & Density Reference Charts are available in a wide variety of patterns, designs and sizes to fit a multitude of today’s application needs. Our gray scales and density patches are measured on a variety of NIST traceable instrumentation, including some of the most sophisticated microdensitometers available to the industry. They are imaged on either Photo Paper (RM) or Film (TM) to function for reflective or transmissive applications.

Product

Transformer Turns Ratio Meters

-

Vanguard Instruments Company, Inc.

Vanguard Instruments Company, Inc.

The ATRT-01 S3 is Vanguard’s fourth generation, micro-processor based, single phase, automatic transformer turns-ratio tester. The ATRT-01 S3 uses the IEEE C57.12.90 measuring method to determine the transformer turns-ratio. The transformer turns-ratio is determined by precisely measuring the voltages across the unloaded transformer windings. The ATRT-01 S3’s measuring circuitry self adjusts before each measurement to ensure turns-ratio accuracy. Two selectable test voltages, 4Vac and 40Vac, offer flexibility in testing different types of transformers.

Product

IEC60335 Standard Electrical Temperature Tester

CX-w15

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-w15 - Shenzhen Chuangxin Instruments Co., Ltd.

Standard Test corner/room conform to IEC60335-1:2004. and GB4706.1-2005. can be used to the temperaturetest of all kinds of electronic products supply, in conformity with the standards requirement of the environmental conditions.

Product

Standard Method Compliant

-

Shimadzu Corp.

Shimadzu Corp.

Shimadzu System GC Analyzers are built and tested to meet the specific analysis requirements of applicable industry standards.

Product

Standard Pitch Spring Probes

-

KITA Manufacturing Co.,Ltd.

KITA Manufacturing Co.,Ltd.

Other than spring probes with gold plating, we have spring probe with anti-solder migration coating and plating that were developed by KITA. We also have anti-solder migration material for plunger tip. These are all included in “MARATHON” series. They have wide range of tip type for various use for every popular total length.

Product

Robotics and Machine Vision Standards

-

Applied Image, Inc.

Applied Image, Inc.

Accuracy in machine vision systems is critical to achieving strategic goals regarding quality, efficiency, and consistency. Use our ACCUplace product lines to calibrate vision systems’ distortion, placement/alignment, or other field parameters in systems used for guidance, identification, gauging, and inspection. Using our specialized ACCUedge® technology, our Robotic and Machine Vision Standards are manufactured with line-edge quality that is second to none in the industry, providing the precision needed to calibrate almost any system. Should you need to alter feature patterns, size, or substrate to fit your needs, fill out our Optical Components and Standards form to start the conversation.

Product

Standard Voltage 37 Pin D-Type Cables - Connector to Connector

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Split type AC Current Transformer

CTS-100

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CTS-100 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*1A output for metering application.*Short circuit switch for secondary output is provided for safe operation.*High accurate transformer for the application of first class meter.*Easy installation by metal fitting.

Product

Standard Tests

-

LXinstruments GmbH

LXinstruments GmbH

The following list contains only the most important standards and does not claim to be complete.EN 60204-1 Electrical equipment of machinesEN 60335-1 Electrical appliances for household and similar useEN 50106 Sampling test, routine tests (in conjunction with EN 60335-1)EN 60598-1 LuminariesEN 60601-1 Medical electrical equipmentEN 60730-1 Automatic electrical controlsEN 61010-1 Measuring, control and laboratory equipmentEN 61439-1 Switch cabinet and switchgearEN 62368-1 Equipment for audio/video, information and communication technologyEN 62841-1 Hand-held electric toolsEN 50191 Erection and operation of stationary and non-stationary electrical test equipmentLVD Low V oltage D irective _