Product

Development System

FE-C450

-

Ceibo Inc.

FE-C450 - Ceibo Inc.

* Emulates Dallas Semiconductors DS89C450 * 62K Code Memory * Real-Time Emulation * Frequency up to fmax at 5V * Windows Debugger For C/C++ And Assembler * 44-PLCC Emulation Header * Target Board and Programmer Included * RS-232 or USB Interface * 64K C/ASM and 8K C++ Included

Product

FCC Certification

-

Compatible Electronics

Compatible Electronics

Here we provide access to information about the FCC authorization methods, excerpts of FCC rules that cover marketing of devices in the United States as well as general terms and definitions used in within the FCC authorization scheme. To file an application for certification at any time, please click the “Service Quote” link above or contact us today.Telecommunication Certification Bodies (TCBs) have been appointed by the Federal Communications Commission (FCC) to approve equipment as required under Title 47, Part 2 of the Code of Federal Regulation (CFR).In essence, this gives you, the manufacturer or responsible party, additional options for product approvals by allowing you to choose from one of many TCBs.Information presented here is derived from FCC CFR Title 47. Please see the FCC CFR web page for access to the official rules or vist Title 47 at e-CFR.

Product

MIL-STD-1553 MCH

M4K1553MCH

-

Excalibur Systems, Inc.

M4K1553MCH - Excalibur Systems, Inc.

The M4K1553MCH interface module for the multimode, multiprotocol, Excalibur 4000 family of carrier boards provide a complete solution for developing and testing 1553 interfaces and performing system simulation of the MIL-STD-1553 bus. The module handles all standard variations of the MIL-STD-1553 protocol.The M4K1553MCH contains 32k x 16 of dual-port RAM for Data blocks, Control registers, and Look-up tables. All Data blocks and Control registers are memorymapped and may be accessed in real time. The dual-redundant 1553 module may be programmed to operate in one of four modes of operation: Bus Controller, Remote Terminal, RT/Concurrent-Bus Monitor, and Bus Monitor. The M4K1553MCH comes complete with Windows software, and a C driver software library including source code.

Product

JTAG Debugger Software

JSCAN

-

Navatek Engineering Corp.

JSCAN - Navatek Engineering Corp.

JSCAN lets you view and control JTAG pins in real-time without having to touch your board! With a simple click of your mouse, you can set pins HIGH or LOW and observe the results right on your PC.J-SCAN works independently of any logic inside the JTAG device, you do not need any special firmware, code or logic installed. View and control pins in real-time, program FLASH memories, create test macros, for system test, easy to use graphical interface and affordable.

Product

SparkFun 2D Barcode Scanner Breakout

-

SparkFun Electronics

SparkFun Electronics

The SparkFun 2D Barcode Scanner Breakout is a nifty little breakout board featuring the DE2120 barcode scanner module from DYScan. The DE2120 reads 20 different barcode symbologies (both 1D and 2D) using a camera coupled with on-board image processing to identify and decode everything from UPC codes to QR codes. The module also features two LEDs: one for illumination and one to project the red line that you're used to seeing from laser-based scanners.

Product

JTAG Debug Probe for Cortex-M

J-Trace PRO

-

SEGGER Microcontroller GmbH & Co. KG

J-Trace PRO - SEGGER Microcontroller GmbH & Co. KG

J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations by internal buffers and slow data transmission.J-Trace PRO can capture omplete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce bugs. This is particularly helpful when the program flow 'runs off the rails' and stops in a fault state. It also supports extended trace features, such as code coverage (so engineers have visibility of which parts of the application code have been executed) and execution profiling (providing visibility as to which instructions have been executed and how often - so hotspots can be addressed and optimization opportunities identified).

Product

Emulates AT89C5121 Derivatives with 6/12 Clocks/Cycle

FE-5121

-

Ceibo Inc.

FE-5121 - Ceibo Inc.

* Emulates AT89C5121 Derivatives with 6/12 Clocks/Cycle * 16K Code Memory * Software Trace * Real-Time Emulation * Frequency up to 16MHz/ 3V, 5V * X1 and X2 Mode Support * MS-Windows Debugger for C and Assembler * Keil mVision2 Debugger Compatible * PLCC-52 and SSOP-24 Emulation Headers * Serially Linked to PC at 115Kbaud

Product

Altitude Data Simulator

ADS-100

-

Trans-Cal Industries, Inc.

ADS-100 - Trans-Cal Industries, Inc.

The Model ADS-100 is an all solid-state device that simulates the output of altitude encoders/digitizers in both parallel and serial (RS232) data formats. Designed to substitute for an altitude encoder when testing and troubleshooting an aircraft's altitude reporting system, the ADS-100 provides two RS-232 compliant outputs in addition to the ICAO pressure altitude code.

Product

6 Channel Digital Receiver Module

DP-VME-5826

-

Data Patterns Pvt. Ltd.

DP-VME-5826 - Data Patterns Pvt. Ltd.

DP-VME-5826 is a VME64x Six Channel Digital IF Receiver module. It samples and down converts analog IF signals into the digital base band data.The digital base band I/O samples generated from these IF samples are pulse compressed. Down converted I/Q data is sent to the signal processor through 2 channels of 2.5 Gbps speed SFPDP link.The digital waveform generator block of digital receiver unit generates programmable polyphase coded digital pulse coded expander output.

Product

Dissolution Testing

-

Agilent Technologies

Agilent Technologies

Agilent offers laboratories the pharmaceutical dissolution testing apparatus, dissolution accessories, and dissolution software for efficient and reliable dosage form testing. Extensive dissolution skills training is also offered to meet the needs of all busy laboratory analysts. Feel confident with Agilent dissolution testing apparatuses. All systems meet the international harmonized guidance requirements defined by USP, EP, CP, IPC, and JP for effective drug dosage form testing. Laboratory analysts can efficiently meet data integrity requirements too. Working to Title 21 Code of Federal Regulations (CFR) part 11 compliance standards is readily achieved using Agilent dissolution testing software.

Product

MAX31855 T-Type Thermocouple Arduino Shield

SEN-30004-T47

-

Playing With Fusion Inc

SEN-30004-T47 - Playing With Fusion Inc

Four channel MAX31855 digital thermocouple Arduino Shield. Two versions of this shield are avaliable for each thermocouple type: either 'Ch 0-3' (CS pins use Uno/Mega IO pins 7-10) or 'Ch 4-7' (CS pins use Uno/Mega IO pins 3-6), with the only difference being which set of zero-ohm resistors are populated on the board. This allows use of other SPI devices that may be 'hard coded' to specific digital pins on the Arduino, or simply stacking one of each type together to get a total of eight thermocouple channels on one Arduino.

Product

ArgoBot Kit

ROB-00001

-

Playing With Fusion Inc

ROB-00001 - Playing With Fusion Inc

The ArgoBot Full Kit is a fully assembled robot and controls development platform. It is based on the Digilent chipKIT WF32(TM), a WiFi enabled development platform, and configured for LabVIEW targeting. Most importantly ArgoBot was designed with FIRST Robotics Competition teams in the front of our minds! Named after the FRC Team 1756 mascot, Argos, the ArgoBot development platform includes a fully-assembled, ready to drive mini WiFi enabled robot (about 8" x 5" x 4"), as well as tons of FRC controls tutorials and example code (LabVIEW VIs). Features included on the ArgoBot will look very familiar to anyone who has worked with National Instruments products (Compact RIO and RoboRIO) in the past. This includes three 5V Digital I/O modules (with jumpered pull-ups), three 5V analog inputs, and an I2C header. Example VIs have been streamlined to enable a 1-click configuration style to accelerate your development process. We also added a 2-channel motor driver that is used to supply the ArgoBot drive motors. Our ultimate goal is that everything you can build, control or implement on ArgoBot can be easily leveraged on your FRC bot! Complimenting its many electrical features, ArgoBot is easy to work with and easy to maintain. The chassis is a polycarbonate (the extremely tough stuff that is easy to drill and modify but easily takes bumps and bruises without cracking) case that is fully intact - meaning that ArgoBot doesn't just come with a case... it is a case! Clean-up and organization is simple - just close the case and turn off the power switch.

Product

Programming Stations

-

Fitech Ltd.

Fitech Ltd.

A dedicated computer setup used to create, test, and upload code or instructions for machines (like CNC tools or industrial robots) or electronic devices (like ECUs) away from the main equipment, reducing downtime and improving efficiency; it mimics the main control interface, allowing for offline development, simulation, and diagnostics, ensuring smoother operations when the actual machine runs.

Product

VITC Readers & Generators

-

HORITA Co., Inc.

HORITA Co., Inc.

Analog composite video and generates standard SMPTE VITC time code and inserts it into the first few lines of active video rather than into the vertical interval where normal VITC is located. This allows the VITC time code to be recorded on various digital video recorders that record the picture content but do not record the actual vertical interval portion of the video signal and in this way allows you to use these digital video recorders to record high quality video and VITC time code.

Product

2nd Generation PCIe Multi-function Decommutator

LS-50-E

-

Lumistar Inc.

LS-50-E - Lumistar Inc.

The Lumistar LS-50-E PCIe Multi-function PCM Decommutator offers a PCM decom, PCM simulator, time code reader/generator, and optional bit synchronizer in a single short PCIe card slot. The multi-function decom and simulator is implemented in FPGA using a next generation design based on the LS-50-P. The simulator, decommutator, time code reader and time code generator are achieved on the main board and the bit synchronizer is achieved through an optional low-profiledaughterboard. CVSD voice decoding, h.261 videodecoding, and IRIG Chapter 8 decoding are achievedthrough software.

Product

Software Test Tool

testIDEA

-

iSYSTEM ag

testIDEA - iSYSTEM ag

The basic premise behind the development of testIDEA was simple: if our development tools have access to the source code and binary code of an embedded application, and our debug hardware can access all of the internal workings of the microcontroller, surely we can simply test embedded software on the target microcontroller.