Showing results: 106 - 120 of 176 items found.
-
TPT69700A -
Matco Tools
*Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet*Air is applied through one adapter to show the presence of leaks within the system*Six pairs of stepped adapters to fit most turbo systems on cars and light trucks
-
WRT -
Digatron Power Electronics
The Welding Resistance Tester is used in battery assembly lines to detect defective intercell connections. It is equipped with a 5-channel test head for car and truck batteries. It features 1-20 O DC resistance ranges and a multi-line LC display for OCV, CCV, and DCR measurements for 5 intercell connections.
-
MTILSCK -
Matco Tools
*Test newer vehicles with recessed spark plugs and conventional and coil-on plug ignition systems*Provides information not available with OBDII code reading devices and pinpoints if there is a spark plug, plug wire, mechanical, fuel injection or electrical problem*Troubleshoots most domestic and import cars, SUVs and trucks
-
DeltaTRAK
Monitors location, temperature, humidity, light, shockData transmitted via GSM cellular networksNo hardware or software installationAlerts and notifications via email and SMSGeofencing enabledNo need to open vehicle doors to access information24/7 cloud service to view and analyze data remotelyMake immediate cold chain management decisionsReroute trucks when necessaryCustomize settings for logging intervals, high/low alarm limitsData stored in the cloud for traceability, audits, HACCP, and FSMA compliance
-
EverythingPCB
We specialise in vibration damping and shock isolation solutions for electronics and other light load applications.Our soft gel vibration damping materials are designed for isolating very light componets and extreme temperature environments.Most of our products are held in stock to support engineers with urgent vibration damping, noise control, shock isolation and cushioning impact problems.Our shock and vibration solutions are currently in use in aerospace, rail, truck, bus and handheld applications.
-
RS-80K -
Taylor Dynamometer, Inc.
RS-80K towing dynamometer is designed fortesting Class B trucks and is the most full-featured, reliable and accuratetowing dynamometer in the industry. The RS-80K is built with a heavyduty steel frame, heavy-duty industrial axles and rides on an air ridesuspension. The RS-80K is designed to maintain 80,000 Newtons ofconstant drawbar pull and the ability to simulate an uphill slope of25%. The towing dyno uses absorbers with special high temperaturecoils powered by an industrial generator so there are no lead-acidbatteries to charge and testing is unlimited at low speeds.
-
RS-90K -
Taylor Dynamometer, Inc.
RS-90K towing dynamometer is designed fortesting Class A trucks and is the most full-featured, reliable and accuratetowing dynamometer in the industry. The RS-90K is built with a heavyduty steel frame, heavy-duty industrial axles and rides on an air ridesuspension. The RS-90K is designed to maintain 90,000 Newtons ofconstant drawbar pull and the ability to simulate an uphill slope of25%. The towing dyno uses absorbers with special high temperaturecoils powered by an industrial generator so there are no lead-acidbatteries to charge and testing is unlimited at low speeds.
-
RS-200K -
Taylor Dynamometer, Inc.
RS-200K towing dynamometer is designedfor testing Class A trucks and is the most full-featured, reliable andaccurate towing dynamometer in the industry. The RS-200K is builtwith a heavy-duty steel frame, heavy-duty industrial axles and rides onan air ride suspension. The RS-200K is designed to maintain 200,000Newtons of constant drawbar pull and the ability to simulate an uphillslope of 25%. The towing dyno uses absorbers with special hightemperature coils powered by an industrial generator so there are nolead-acid batteries to charge and testing is unlimited at low speeds.
-
RS-60K -
Taylor Dynamometer, Inc.
s RS-60K towing dynamometer is designed fortesting Class B trucks and is the most full-featured, reliable and accuratetowing dynamometer in the industry. The RS-60K is built with a heavyduty steel frame, heavy-duty industrial axles and rides on an air ridesuspension. The RS-60K is designed to maintain 60,000 Newtons ofconstant drawbar pull and the ability to simulate an uphill slope of25%. The towing dyno uses absorbers with special high temperaturecoils powered by an industrial generator so there are no lead-acidbatteries to charge and testing is unlimited at low speeds.
-
RS-125K -
Taylor Dynamometer, Inc.
RS-125K towing dynamometer is designedfor testing Class A trucks and is the most full-featured, reliable andaccurate towing dynamometer in the industry. The RS-125K is builtwith a heavy-duty steel frame, heavy-duty industrial axles and rides onan air ride suspension. The RS-125K is designed to maintain 125,000Newtons of constant drawbar pull and the ability to simulate an uphillslope of 25%. The towing dyno uses absorbers with special hightemperature coils powered by an industrial generator so there are nolead-acid batteries to charge and testing is unlimited at low speeds
-
RS-110K -
Taylor Dynamometer, Inc.
RS-110K towing dynamometer is designedfor testing Class A trucks and is the most full-featured, reliable andaccurate towing dynamometer in the industry. The RS-110K is builtwith a heavy-duty steel frame, heavy-duty industrial axles and rides onan air ride suspension. The RS-110K is designed to maintain 110,000Newtons of constant drawbar pull and the ability to simulate an uphillslope of 25%. The towing dyno uses absorbers with special hightemperature coils powered by an industrial generator so there are nolead-acid batteries to charge and testing is unlimited at low speeds.
-
34500 -
S & G Tool Aid Corp
Check oil pressure in automotive transmissions and engines. Adapters provide coverage of most domestic and imported cars and light trucks. Gage calibrated from 0-600 PSI (0-4,000 kPa & 0-7.0 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied with instructions in a durable vinyl pouch.
-
KRD51 series -
CME Technology Co. Ltd.
Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (such as: medical supplies, electronics, weaponry, communication devices) travel for extended periods of time and must be transported off-road. All of these items must maintain functionality upon arrival at their destinations.
-
27300 -
S & G Tool Aid Corp
Features an extra long wire that stretches up to 12 feet for use, then automatically retracts. Quickly and easily check electrical circuits and accessories on 6 and 12 volt systems. Great for use on cars, trucks, boats, trailers, motorcycles, airplanes and snowmobiles. Heavy duty ground clip with insulator. 3 1/4" standard length probe
-
27250 -
S & G Tool Aid Corp
Features an extra long wire that stretches up to 12 feet for use, then automatically retracts. Quickly and easily check electrical circuits and accessories on 6 and 12 volt systems. Great for use on cars, trucks, boats, trailers, motorcycles, airplanes and snowmobiles. Heavy duty ground clip with insulator. 6 1/2" long, insulated probe.