Current Comparators
-
Product
High Current Wedge Probe
PCW Series
-
American Probe & Technologies, Inc.
This series of wedge probe offers customization for high current and low contact resistance probing applications.
-
Product
3-Phase Current Meter With 3 X 75A Clamp-On CT
EVA-2210
-
LoRaWAN® wireless connectivity3 x 75A Clamp-On CTBattery life up till 3.5 years@25 °C, 60 mins interval settingEasy to deploy and maintain
-
Product
Current Probe
PA-655
-
*Max. ±50A DCA*Resolution: ≧5mA*Bandwidth: DC~500KHz*Rise Time: 0.7us*Over Range Function*20mV/A, 200mV/A Range*Adaptor/Battery Input*Separating Design,Convenient Durable
-
Product
High Current Probes (Power Electronics) HCF77311B180G300
1019593
-
The HCF77311B180G300 High Current Probe is specifically designed for power electronics applications, providing precision and reliability for critical measurements. This basic contact probe is capable of handling a continuous current of up to 30A and operates effectively within a temperature range of -45°C to +200°C. With a typical contact resistance of only 8 mOhm, it ensures accurate and consistent signal transmission, making it ideal for demanding electronic testing environments.
-
Product
Leakage Current Sensors / Small Current Sensors
-
ChenYang Technologies GmbH & Co. KG
This current sensor is based on magnetic modulation and compensation principle, and can beused for measurement of small DC current and leakage current, current difference between two ormore conductors.
-
Product
sbRIO-9253, Non-Enclosed, 50 kS/s/ch, 24-Bit, 8-Channel C Series Current Input Module
787433-01
Current Input Module
Non-Enclosed, 50 kS/s/ch, 24-Bit, 8-Channel C Series Current Input Module - The sbRIO-9253 is an 8-channel analog input module for CompactRIO Single-Board Controller that provides a ±20 mA input range and 24 bits of resolution at a 50 kS/s sample rate. This module includes diagnostic functionalities to ensure nominal system operations with open-channel detection, power supply detection, and configurable thresholds. You can view the status of each channel and the power supply with eight LEDs. The sbRIO-9253 also features programmable hardware filters for your applications, such as specific Butterworth and comb filters that you can use to reduce the noise in your system.
-
Product
Integrated Current Sensors
HMSR series
-
The HMSR is a new generation of high insulated Integrated Current Sensor from LEM. These product family provides a robust, compact and very accurate solution for measuring DC and AC currents in all highly demanding, switching power applications for commercial, industrial. HMSR is a micro core based open loop sensor with a reinforced insulation and overcurrent detections (user configurable and factory set). These features make the device suitable for high voltage applications requiring high precision and strong immunity against external field. The primary conductor (pins 1 and 8) has very low electrical resistance and dedicated pads d
-
Product
Bluetooth Integrated Flexible Coil Current Meter
-
One of the most advantages of the Flexible Coil Current Meter is external wirelessly connect to Smart phone / Tablet / PC to view data, record reading, capture picture with data on it and send the information to headquarter.
-
Product
L.V. Current Transformers
-
ENTES LV Current Transformers are measuring transformers which transform the primary current by a specified ratio to its secondary side with a phase difference of 0 degrees. They provide isolation of the relays and measuring devices from the HV side of the network.
-
Product
FaithTech Ultra Low Voltage And High Current DC Load
NZ/N Series
-
Shenzhen FaithTech Technology Co., Ltd.
Ultra low voltage and high current DC electronic load is a high reliability and high performance electronic load product derived from FT conventional electronic load for low voltage and high current test scenarios such as fuel cell test and CPU power supply device test. For different current levels, this product includes two series: NZ and N. The voltage is 0-20V or 40V, in which the NZ series can be loaded with 0V full current, and the N series can be loaded with ultra-low voltage and full current. The load capacity is up to 0V@1200A and 0.2V@5000A . This series of products has high precision and high cost performance, which is your good choice for testing.
-
Product
High Current Probes (Power Electronics) HCF77317B400G300
1013056
-
The High Current Probes (Power electronics) HCF77317B400G300, identified by MPN 1013056, is a precision tool designed for efficient electrical contact in various power electronics applications. Its brass handle provides durability, ensuring reliable operation even under demanding conditions. This probe operates within a temperature range of -45°C to +200°C, making it suitable for a wide array of environments. Its design as a basic contact probe with a pitch of 3.50 mm enables excellent connectivity, critical for high-performance electronic testing and development.
-
Product
High Current Probes (Power Electronics) HCF77216B100G300
1005046
-
The High Current Probes (Power electronics) HCF77216B100G300 is engineered for high precision and reliability in demanding electronic applications. This basic contact probe showcases remarkable capabilities with a design that facilitates a pitch of 2.54mm, ensuring seamless integration into various setups. Designed to operate within a temperature range of -45°C to +200°C, this probe is robust in extreme conditions, offering a continuous current capacity of 20.00 A and a typical contact resistance of just 10.00 mOhm, making it ideal for optimal power delivery.Constructed from premium materials, the probe features a beryllium copper plunger with a gold plating that enhances conductivity and performance. The brass barrel also benefits from gold plating, further ensuring longevity and reliability. With precise mechanical specifications, including a preload of 50.00 cN and a maximum travel of 5.00 mm, the HCF77216B100G300 is adept at maintaining accuracy with a pointing accuracy of +/- 0.08 mm. This is complemented by various accessories designed to facilitate its usage, making it a versatile choice for professionals in the field of power electronics.
-
Product
High Current Probes (Battery Contacting) HCF77205B250G300A
1165638
-
The High Current Probes (Battery Contacting) HCF77205B250G300A are designed as essential components for precision electrical measurements, making them ideal for various applications that require reliable and high-performance connections. Constructed to operate efficiently across a temperature range from -45°C to +200°C, these probes possess robust mechanical and dimensional attributes suitable for both everyday use and extreme conditions. With a compact total length of 32.30 mm and a pointing accuracy of +/- 0.08 mm, these probes ensure precise contact and readings, facilitating high current measurements with confidence.
-
Product
High Current Probes (Battery Contacting) HCF73314B230G600HP
1000234
-
The High Current Probes HCF73314B230G600HP is an innovative tool designed for seamless battery contacting in 3D printing applications. With a crucial operating temperature range of -45°C to +200°C, this probe is engineered to withstand diverse working conditions, making it highly adaptable for various applications. It features a basic contact probe design, making it easy to integrate into existing setups, while its precise specifications ensure consistent performance and high reliability.
-
Product
Clamp on AC Leakage Current Sensors
-
High Accuracy Clamp AC Leakage Sensor use permalloy magnetic cores, with small size, high accuracy, good stability, strong anti-interference ability characteristics. It is applied with double shield technology, which insure strong anti-interference ability.
-
Product
High Current Probe F84006B130G2000
1118583
-
The F84006B130G2000 is an advanced high current probe designed for precision measurements in power electronics applications. This coaxial probe integrates high-quality materials and engineering for optimal performance across a wide temperature range, from -45°C to +200°C. With a compact pitch of 7.00 mm (275 mil), this probe is tailored for environments demanding reliability and efficiency, making it an ideal choice for various high current testing applications.
-
Product
Earth Leakage Breaker And Residual Current Device
IGR Series
-
IGR Leakage Current Analyzer is invented as the world first, and also can measure Insulation Resistance (MO) without power cut-off. This patented instrument can analyze leakage current, and display Igr(resistive), Igc(capacitive), and Io(vector sum), Ground Insulation Resistance, and the phase angle between voltage and current. (IGR ELB) - Operates due to Igr. - Properly-operating in spite of IGC in digital era. ( Not tripping on UPS load and Harmonics and noise area) - Possible to go down Igr for safety of people and animals. - Possible to manufacture high sensitive ELB. - Possible to prevent fire from electric leakage current.
-
Product
NI-9246, 50 kS/s/ch, 20 Arms, 30 Apk, 24-Bit, 3-Channel C Series Current Input Module
783920-01
Current Input Module
50 kS/s/ch, 20 Arms, 30 Apk, 24-Bit, 3-Channel C Series Current Input Module - The NI‑9246 is designed to support direct ring lug connectivity to the three-phase high-current measurements of 1 A and 5 A current transformers (CTs). It is optimized for power, energy, and industrial applications. The safety features, certifications, input ranges, overvoltage ranges, and connectivity are well suited for applications such as power quality monitoring and metering, utility pole-mounted smart switches, utility pole-mounted smart grid reclosers, substation merging units, industrial machine measurements, health monitoring, predictive maintenance and prognostics, and phasor measurement units (PMUs).
-
Product
High Current Probes (Power Electronics) HCF77512A400U300
1016236
-
The High Current Probes HCF77512A400U300 are precision instruments designed for power electronics applications, boasting a robust and versatile design suited for various testing environments. With a high-temperature tolerance ranging from -45°C to +200°C, these probes ensure reliability in diverse conditions. Featuring a pitch of 5.00 mm (197 mil), they are engineered to deliver exceptional performance in accuracy and stability. The solid construction allows continuous current handling up to 50 A, while maintaining a typical contact resistance of just 5 mOhm, making them ideal for high-performance applications.
-
Product
Leakage Current Testing
-
Educated Design & Development, Inc.
Fast - All operator controls are located on the front panel to expedite testing. The entire test can be performed in a matter of seconds! Pays for itself in time and stress savings. Versatile - Measures Leakage Current in accordance with UL, CSA, EN, and IEC/ International Standards. Includes ability to perform open neutral, open ground, and line polarity forward/reverse test conditions. Adaptable - Universal rear panel receptacle allows for testing products with any plug configuration. Accurate - True RMS meter accurately measures both sinusoidal and non-sinusoidal waveshapes. This is important when testing products using a switch mode power supply which can generate non-sinusoidal leakage currents. Calibrated, traceable to NIST. Flexible - A front panel switch permits testing either through the power cord of the product under test, from surface/ patient connection-to-ground, or from surface/ patient connection-to-surface/ patient connection. Portable - Lightweight, with integral handle. Other Features - Product Ground Switching (grounding conductor maintained to device under test when not measuring leakage). Automatic front receptacle disconnect when configured in the 240V test mode (prevents inadvertent connection of 120V when configured for 240V operation). Proven - These are the only leakage current testers designed and supported by Product Safety experts. That is part of the reason why they have become the standard in the industry. Full technical support by experienced safety engineers.
-
Product
Current Measurements of PWM or Inverter, AC/DC 0.5～5A, φ16mm
CTF-5DC
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*AC/DC 0.5～5A*Current measurements for PWM or inverter
-
Product
AC Current Isolated Sensor Two / Four Wire Transducer
TSCT (Average Sensing) / TFCT (TRUE RMS)
-
Kusam Electrical Industries Limited
• Transform Input: AC 5~400A directly into DC 4~20mA, no need external CT.• Suitable for application with high waveform distortion :(Frequency converter, Motor, SCR )• High accuracy ＜0.5%• High response time• High stability, easy connection.
-
Product
AC and DC Current or Voltage Transducers
VT7 AND VT8 Series
-
The Model VT7 Series dc voltage transducer produces an output which is directly proportional to the input from dc to 10kHz. It functions as a millivolt dc shunt or a high voltage isolator to 1000V
-
Product
High Current Probes (Battery Contacting) HCF73207B175G300A
1165583
-
The High Current Probes (Battery Contacting) HCF73207B175G300A is a critical component designed for precision applications. This basic contact probe features a pitch of 2.54 mm and operates effectively within a temperature range of -45°C to +200°C, making it suitable for various environments. With a continuous current rating of 20.00 A and a typical contact resistance of just 10.00 mOhm, this probe ensures reliable conductivity and minimal energy loss. Its robust construction and materials, including a beryllium copper plunger and a silver-plated brass barrel, provide durability and optimal performance even under challenging conditions.
-
Product
Portable Current Supply 10 AMP output
CS-10
-
The CS-10, Sure beats carrying around a rectifier and generator...
-
Product
AC DC Current and Voltage Converters
-
The DAT5023 I is an AC or DC current converter, the input current range is selectable on order from 0-5Amps, 0-10Amps, 0-20Amps, 0-25Amps, 0-30Amps, 0-40Amps, 0-50Amps, 0-60Amps. It measure the current with the use of a Hall effect transducer. There is a coil (current transformer) inside the current converter which is isolated from the current input. The cable passes through the housing of the converter and the coil and the true root mean square measurement is taken from this coil then converted to a standard industrial signal output.
-
Product
Through Hole type AC Current Sensor
CT-6K
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
For measuring current generally (through hole type)
-
Product
Flexible AC/DC Current Tester
FCM-100
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*Bending free flexible clamp sensor *Wide measuring ranges (AC/DC 0.001A～2500A)*Easy accessibility to the hard to clamp object*Big CT window (φ200mm)
-
Product
Optical Comparator
Golden Units
-
The use of the Golden Units is the easiest way to ensure that your production devices are inspected to the accuracy you expect. The use of an optical comparator brings into play the subjectivity of the operator and errors induced by bending leads on real parts during handling by the operator.
-
Product
Clamp type AC Current Sensor／for Power Monitor
ZCT-40PS
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*Compact size*AC 1A～500A*Current measurements of feeder
