-
Product
Ada Source Code Analyzer
CodePeer
-
CodePeer is an Ada source code analyzer that detects run-time and logic errors. It assesses potential bugs before program execution, serving as an automated peer reviewer, helping to find errors efficiently and early in the development life-cycle. It can also be used to perform impact analysis when introducing changes to the existing code, as well as helping vulnerability analysis. Using control-flow, data-flow, and other advanced static analysis techniques, CodePeer detects errors that would otherwise only be found through labor-intensive debugging.
-
Product
Gravimetric Gas/Vapor sorption vacuum analyzer
DVS Vacuum
-
The DVS Vacuum is designed for single and multicomponent vapor/gas sorption analysis, supporting static and dynamic experiments. The system’s key features are precise control and measure of temperature and pressure while recording the changes in sample mass using high-resolution UltraBalance.
-
Product
Dew Point Analyzer
CI-IN36
-
Shanghai ChangAi Electronic Science & Technology Co.,Ltd
CI-IN36 adopts the sensor that is made of thin polymer film, which can test the dew point with good stability. It will not influenced by condensed water and most compounds. This analyzer has received automatic zero point calibration and gain return patents with wide measure range, high accuracy, good stability and high performance cost ratio. - See more at: http://en.ci-ele.com/470baa2f-f4d7-af3b-c88b-b26356a1660d/8e93bc9f-4658-e0c4-2205-0be00b504269.shtml#sthash.KzPqj2sw.dpuf
-
Product
Flue Oxygen Analyzer
GNL-IN191
-
Shanghai ChangAi Electronic Science & Technology Co.,Ltd
It is combined by gauge outfit and probe, the gauge outfit is based on microprocessor, the probe adopts frequency conversion oxygen analyzer as the measuring unit. The analyzer measure most accurate in 0~25.00% nitrogen- oxygen mixed gases. - See more at: http://en.ci-ele.com/79b7fcd3-aee7-30a4-9cf8-76748ef33dcc/9b6425da-e68d-50a8-067e-40b84f9bd2f8.shtml#sthash.Vh7PRsZP.dpuf
-
Product
Spectrum Analyzers
SK4M Series
-
*Frequency range: 100 Hz to 20/50 GHz*DANL < −165 dBm/Hz*Low Phase Noise −125 dBc/Hz at 1 GHz signal from 100 kHz offset*High Frequency Reference Accuracy ±0.1 ppm*Resolution Bandwidth Range 1 Hz to 10 MHz*Built-in Low-noise Amplifier
-
Product
Model Vector Network Analyzer
DZV-1
-
Digital Signal Technology, Inc.
DZV-1 is the vector network analyzer which can be measured the impedance and VSWR of the antenna, S Parameter of RF component and devices. It is small and low-priced. So, it is suitable for the production line, laboratory use, various testing applications, and the educational use. The communication between the DZV-1 unit and PC is done via USB, which is also used for power supply. The LOG-MAG characteristic, the phase-characteristic, the group delay frequency characteristics, the Smith chart, the polar coordinates, the SWR characteristic can be displayed on PC.
-
Product
Handheld XRF Analyzer
Vanta Element
-
The Vanta Element XRF analyzer series provides elemental analysis for fast alloy grade identification and sorting at an affordable price. The series is available in two cost-effective models
-
Product
Gas Leak Detector
-
Shanghai Yiya Electronic Instrument Co., Ltd.
High-frequency generator used for detecting leaks in a pumping system.
-
Product
On-line MAP Gas Analyzers
-
Our online MAP gas analyzers continuously extract and monitor packaging gas from the Modified Atmosphere Packaging line to ensure that the equipment and gas mixing system deliver a desirable protective atmosphere which meets the requirements for prolonged shelf-life products within the food & beverage and pharmaceutical industries.
-
Product
Antenna Impedance Analyzer
TZ-900 AntennaSmith
-
Analysis Parameters: SWR, Complex Impedance, R+jX, reflection coefficient, Smith Chart. 0.2 - 55 MHz • SWR
-
Product
Gas Flow Meters
-
There are innumerable circumstances where gas flow rates need to be quickly and precisely measured. You’ll always be prepared with Netech’s versatile range of gas flow meters, which are designed to measure several types of gases including air, N2, O2, CO2, and He.
-
Product
Trace Level Portable Gas Calibrator
Model T750U
-
Teledyne Advanced Pollution Instrumentation
The Model T750U is a portable, microprocessor based calibrator for precision trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750U is housed in a high-density, molded travel case which includes an integral handle and wheels for durability and ease of use in the field.
-
Product
Benchtop Polarization Analyzer
N7781C
-
The Keysight N7781B is a compact high-speed Polarization Analyzer which provides comprehensive capabilities for analyzing polarization properties of optical signals. This includes representation of the State of Polarization (SOP) on the Poincar Sphere (Stokes Parameter).
-
-
Product
Continuous Gas Analyzer
CT5800
-
Emerson's Rosemount CT5800 continuous gas analyzer is the first Quantum Cascade Laser (QCL) analyzer designed for industrial process applications requiring Class I, Division 2 hazardous area certification. Built within a flameproof enclosure, the CT5800's unique cell design enables high accuracy measurement of concentrations of impurities down to low ppm levels in the gas streams, and is ideal for Hydrogen purity, Nitrogen purity and Ethylene purity applications. With up to six laser modules housed inside the same enclosure, the CT5800 analyzer can measure up to twelve components simultaneously, greatly reducing the need for multiple analyzers.
-
Product
Oil-in-Water Analyzers
-
The Mirmorax Oil-in-Water analyzer is based on an ultrasonic measurement technique in which individual acoustic echoes are characterized using advanced signal processing.
-
Product
TOC Analyzer
QuickTOCultra
-
Fast, Accurate, Low-maintenance Monitoring of TOC, COD, TOD or Nitrogen
-
Product
Multi-Layer Analyzers
DSL Xpert™
-
The patent-pending DSL Xpert multi-layer analyzer broke new ground as the only non-intrusive performance analysis solution for ADSL2Plus, ADSL2 and ADSL products. It is a modular tool designed for R&D and laboratory engineers engaged in the deployment of ADSL2Plus, ADSL2 and ADSL standard-compliant solutions. Cutting significant time from ADSL development, deployment, debugging and interoperability verification, DSL Xpert� accelerates time to market and return on investment.
-
Product
Panel-mount Type Residual Chlorine Meter (Four-Wire Transmission)
HR-480
-
HR-480 industrial residual chlorine meter takes sequential measurements of free residual chlorine, which is an indicator used in the inspection of the anti-bacterial properties of drinking water and swimming pools.The sensor(RS-1) combined with uses a galvanic method with no drive section, making it highly maintainable, and producing stable measurements over a long period.
-
Product
In-Situ Cross- Stack Laser Analyzer
-
LS25 is an in-situ analyzer for non-contact measurement of the concentration of gases. The measuring principle of the LS25 is based on the principle of single line spectroscopy (Tunable diode laser absorption spectroscopy, TDLAS). A single cross-sensitivity-free absorption line of the gas to be measured is selected in the near infrared range. A single-mode diode laser operating at room temperature scans the respective absorption line. By using an opposite receiver, the absorption caused by the sample gas is measured and from this the concentration is calculated. An automatic correction for pressure and temperature changes is possible. In addition, the transmission is displayed respectively output as a signal for preventive maintenance.
-
Product
Performance Analyzer for SOA
Tidal
-
Improve SOA Performance Monitoring. You can use service-oriented architecture (SOA) to produce comprehensive applications. However, you must also handle the new complexities of SOA performance monitoring to keep those applications functioning well. Cisco Tidal Performance Analyzer for SOA is software that simplifies SOA performance monitoring.
-
Product
Network Analyzers
MPR1 Series
-
CurrentNeutral currentVoltage (Phase to Phase, Phase neutral)Active, Reactive and Apparent powerFrequencyActive PowerReactive PowerApparent PowerCos φPower FactorTotal Active PowerTotal Reactive PowerTotal Apparent PowerTotal Cos φTotal Power FactorTotal Harmonic Distortion of the CurrentTotal harmonic distortion in current from phase to phaseTotal harmonic distortion in neutral current from phase to phase
-
Product
Online Elemental Analyzer
MAYA
-
Lyncis online analyzer is a radiation-free material elemental composition analytics solution for real-time process control optimization in the mining and mineral processing industry.
-
Product
Particle Size Analyzer
-
An analytical instrument used to measure the size distribution, shape, and count of particles within a liquid or powder sample.
-
Product
Wave Quality Analyzer
APQM-711
-
The APQM-711 wave quality analyzer enables measurement, analysis and recording of 50/60 Hz network parameters and wave quality diagnostics according to EN 50160. The APQM-711 is an innovative and unique model, it has Wi-Fi communication with the included tablet. The tablet allows all operations to be carried out remotely and with its 10" touch screen it is very easy to operate. From the tablet you can operate the analyzer intuitively and quickly, we can also perform the preview of live data and reading and analyzing data stored in internal memory.
-
Product
Dynamic Mechanical Analyzers
-
Dynamic Mechanical Analysis measures the mechanical properties of materials as a function of time, temperature, and frequency. In addition to basic material properties, DMA also quantifies finished part characteristics, reflecting the important contribution that processing has on end-use performance. DMA is commonly used to measure glass transition temperatures and secondary transitions, orientation caused by processing, cold crystallization, cure optimization, filler effects in composites, and much more. DMA provides an accurate measure of material stiffness (modulus) but also other important mechanical properties such as damping, creep, and stress relaxation.
-
Product
2-Port 18 GHz Analyzer
M5180
-
VNAs and ACMs are delivered with factory calibration certificates containing no data. The add-on option for ISO17025/Z540-1 Accredited, Traceable Calibration Certificate and Uncertainties is available and needs to be specified at time of order.
-
Product
LogicPort Logic Analyzer
LA1034
-
The LogicPort provides 34 channels sampled at 500MHz. This includes two state-clock inputs which function as normal sampled channels in timing-mode. The LogicPort logic analyzer's hardware is controlled and powered via your PC's USB 1.1 or 2.0 port for the ultimate in convenience and portability.
-
Product
Labratory Micro-Spot XRD Residual Stress Analysus with both Iso- and Side-Inclination Methods
AutoMATE II
-
Residual stress may be created during the manufacturing process of a material, or it may accumulate in a structure over many years in operation. In either case, this stress can have a serious negative effect on a product's quality, durability and lifetime. Accurate detection of residual stress is an important element of the quality control process and helps predict the service lifetime of products.
-
Product
Multisystem Ignition Analyzer
TA500
-
The TA500''s unique and proprietary technology allows the user to perform quick and reliable diagnostics of non-starts, misfires, fouled up or damaged spark plugs and/or spark plug wires, by comparing digital read-outs of the spark plug voltage and spark burn time between cylinders on engines using Coil on Plug, Coil near Plug, conventional distributor/ignition coil, DIS (Distributor-less) or waste spark and magneto technologies.
