System Test
Testing conducted on a complete, integrated system to evaluate the system's compliance with its specified requirements .
See Also: Systems, Equipment, Test Systems, System Integrators
-
product
Modulation Distortion For E5081A Up To 20 GHz
S960704B
The Keysight S960704B modulation distortion software application enables fast and accurate active device modulation distortion characterization under modulated signal conditions up to 20 GHz. The wide dynamic range and vector error correction of the ENA-X yield an extremely low residual EVM of the test setup, delivering a complete picture of your device’s signal distortion performance without test system interference. S960704B software measures EVM, NPR, ACPR, and decomposes linear and nonlinear...show more -
product
DGS-65 Test Panel with FV Simulator / Bed of Nails
TA-650
The TA-650 is a new test fixture that will give any instrument shop the ability to conduct more detailed testing of the Collins DGS-65 directional gyro then was previously available.
-
product
Pre-Configured Core Test Sets
An In-Phase Core Test Sets provide you with a solid foundation and hardware framework to build your test set. Our pre-engineered Core Test Sets provide a completely integrated test set
-
product
Cable Test Van
The desire for faster and more efficient cable fault location as well as cable testing and diagnostics demands the ergonomic installation of equipment into vehicles. To be able to satisfy the customer's particular requirements, each system is factory-fitted into a vehicle of their choice. The size of vehicle will dictate the equipment at the planning stage. Ergonomics, taking into account the customer's needs, is paramount.
-
product
Automated OIS Tests
STEVE-6D
Image Engineering GmbH & Co. KG
STEVE executes controlled movements and delivers results about the performance of a camera's image stabilizer. The included control software includes an automated analysis and can also operate the Digitus, a device for automated triggering of a camera.
-
product
Forensics Test & Analytical Solutions
Science and technology are playing an increasing role in the investigation and prosecution of crime. Technology innovation, automation, databases and good laboratory practices are essential to the pursuit of justice and are critical to the appropriate collection, assessment, and application of evidence in the criminal justice system. Forensic Toxicology, Antidoping, Forensic DNA Analysis, Controlled Substances, Trace Evidence Detection, Suspicious Documents, LIMS for Forensics Labs, Forensics Resource Library, Human Identification.
-
product
Drop Test Machine
Single-wing Drop Test Machine Simulate the drop conditions of packaged products when different faces, edges and corners fall to the ground from different heights, thus to understand the damage of the product and evaluate the drop height and impact resistance that the packaging materials can endure while falling down, so as to improve and optimize package design according to actual conditions of the product and national standard range.
-
product
Machine Vision Systems
BCO uses National Instruments hardware and software tools for image acquisition and processing to address applications such as quality and process control, automated testing for semiconductor, automotive and electronics, intelligent monitoring, and medical imaging.
-
product
Remote Weapon Systems Sight
ThermoSight® V4000E
The ThermoSight® V4000E is a cooled midwave infrared (MWIR) sight for long-range remote weapon systems designed to maximize performance and stand off range. It has a wide field of view of 10 degrees to scan the scene for threats and targets a narrow 2 degrees field of view for target assessment and accurate timing. The ThermoSight® V4000E has superior automatic detail enhancement (ADE), a proven low-life cycle cost, and a fast and reliable calibration mode (NUC) for easy operation.
-
product
High Precision Energy Meter Test Bench
SY8330
Hong Kong Songyang Industrial Ltd.
SY8330 Series Three Phase Energy Auto-calibration System is a new generation, high precision, multifunctional energy meter calibration equipment. It uses the international’s most advanced technology and components available in 90 decade. It can be widely used to calibrate different kind of single phase energy meter both channel & three phase energy meter or multifunction power meter.
-
product
High Soeed CMOS System on Chip (SoC) Line Scan Image Sensor
LS4k
The LS4k is a high speed CMOS System on Chip (SoC) line scan image sensor optimized for applications requiring short exposure times and high accuracy line rates. It incorporates on chip two pixel arrays consisting of 2 rows with 4,096 7µm pitch pixels and 4 rows with 2,048 14µm pitch pixels respectively, a high accuracy (12-bit) high speed (84MHz) analog-to-digital conversion (ADC), and sophisticated on chip optical calibration for PRNU, DSNU, and lens shading correction.
-
product
Flexible Switching System
S2561E
Universal Switching Corporation
This single-ended field-proven product has what no other switching manufacture can deliver. It provides a solid-state high performance, high frequency configuration that is the most dense available. Perfectly suited for audio, video, PCM, clock/data or other types of signals ranging from DC to 125MHz, the S2561D is specifically designed for the system professional demanding high signal performance with small compact packaging, and exceptionally affordable.
-
product
On-Line Gas Analysis System
Titan-OL
The Titan-OL is a turnkey, process-ready gas analysis system. The analyzer and sample handling hardware can be wall or frame mounted in a NEMA enclosure suitable for use in production environments, including Class I, Div. 1. The integrated sampling system is fully purgeable and can handle multiple sample and reference lines.
-
product
Wafer Handling System with Extended Vertical Travel, for 200mm, 300mm and 450mm Wafers
EVTMHS
The EVTMHS is a wafer handling system with extended vertical travel designed to transport 300mm and 450mm wafers in semiconductor manufacturing tools that require large work envelope solutions.The system can also handle 200mm wafers without any hardware changes. While for wafer sizes below 200mm, the robot End-Effector has to be reconfigured. The time that this reconfiguration takes is usually less than an hour including the time needed to teach all the pickup positions. Thus, the average teaching time of 45 minutes (for pickup locations) can be achieved thanks to the sophisticated autoteach routines provided by the system firmware.
-
product
LUTHER & MAELZER BARE AND LOADED BOARD TEST PROBES
SERIES LMP 60
MechanicalMINIMUM CENTERS: .100 (2.54)FULL TRAVEL: .160 (4.06)WORKING TRAVEL: .107 (2.72)OPERATING LIFE: 1,000,000 cyclesElectricalMAXIMUM CURRENT: 5 amps continuousat working travel, non-inductiveRESISTANCE: At 35 mA test current,35 mOHMS meanMaterials and FinishesPLUNGER: Heat treated berylliumcopper, 24 Kt gold plated over nickelBARREL: Nickel silver, 24 Kt goldplated over nickel
-
product
Charge System Safety
Renesas' charging system safety circuits are optimized to provide a redundant safety protection to an Li-ion battery charging system by monitoring input voltage, battery voltage and charge current.
-
product
USB-C® Short Channel Rx Precet. Test Fixture
AUT20098
*Easy swap between CC1 and CC2RP & RD Mode: In the older version of the USB-C full breakout board, users had to manually set the jumper with a short pin. But now users can easily swap between the two by just moving the switch.*In the previous version, the soldering joint of Test Fixture Host Fixture 1A gets worn out quickly from repetitive plug and pull. This newly designed fixture is more durable and users can easily replace the worn out SMA connectors with new ones.*DC-in Jack is upgraded to +5V USB C portA boost in user experience as it makes setting up easier.
-
product
Industry-Standard, Automated Precision Inspection Systems
Circuit AOI 4.0
Circuit AOI 4.0 is a set of industry-standard, automated precision inspection systems that combine precision, robust construction and line-of-sight technology for assembly and production under stringent regulatory standards and is ideal for PCB / HDI line inspection.It uses innovative alignment detection logic to detect defects such as short / open circuit, protrusion / depression, scratch, pinhole, residual copper, line width / line distance violation, missing objects, unwanted objects, and so ...show more -
product
System Simulation Software
SimulationX
Not only does it cover more physical domains than the competition including the all-new new libraries for acoustics and electric power. It is also the sheer endless possibilities of this utterly flexible tool to integrate with virtually any development environment through various interfaces, add-ins and export functionalities.
-
product
Compiler Test & Validation Suite
SuperTest
SuperTest is the test and validation suite for C and C++ compilers that has tracked the (ISO) language specifications for more than 30 years. It is a complete validation environment with: A huge library of hand-written test, A large body of generated tests, A framework to easily set-up and run compiler validations.
-
product
Speaker/Receiver Unit Test Generator
BK2019
The BK2019 Generator is easy to operate, simple to set up, and you can fit it just about anywhere. This portable generator produces tones or sweeps and is technology you can whip out of your briefcase, plunk down on a table and start using. It's equally useful for either spot checking or for quality control. The setup is so easy that you can change DUT's in minutes.
-
product
Online Programming Test
Landrex Technologies Co., Ltd.
MH Flash Runner I/II/III series, the best solution for MCU mass production programming, whether you want many-to-many (multiple brands and multiple programs), one-to-many (one brand and multiple programs) program) or one-to-one (one label and one program), we can meet the needs of your production line. At the same time, the optional Flash Runner Cube is specially designed for multi-connection boards (simultaneous programming of multiple MCUs), shortening your programming time.
-
product
Probe Systems
These flexible probe stations are designed for the ever-changing test configurations required in a engineering lab. Combined with durable probes or your own high-speed probes, PacketMicro probe stations are the most cost-effective probing solutions in the industry.
-
product
GPC Systems
GPC System
The Nexera GPC System provides highly reliable and highly extensible performance in a wide variety of applications. Hardware that provides rapid instrument stabilization and excellent reproducibility of analytical results, and software that includes analytical workow automation and overlap injection functions and features a user-friendly analysis screen view contribute to improving productivity. In addition, Analytical Intelligence functionality based on state-of-the-art digital technology provi...show more -
product
Test Fixture
16047E
Perform impedance evaluation of lead type devices of up to 120 MHz; includes a guard and a shorting plate
-
product
Gross Gamma Screening System
The Gross Gamma Screening system is intended for the rapid screening of urine samples for the presence of elevated radioactivity in a post-radiological event scenario. This system allows up to eight urine samples to be counted simultaneously in discretely shielded 3” x 3” NaI Well radiation detectors to quickly identify elevated radioactivity from personnel in the exposed population. This screening process provides critical information to Emergency Response Agencies and is accomplished with minimal operator training.
-
product
High Speed Machinery Test Rigs
designs and builds all kinds of rigs for testing the components of high speed machinery. As in our spin pits, BSi's unsurpassed ability to generate and precisely control extraordinarily high speeds is the key competitive advantage. BSi engineers also draw on our vast experience to provide reliable drives and rigs to meet the most demanding requirements under the most extreme conditions. We have engineered and manufactured rigs for testing bearings at speeds to 250,000 rpm. We have delivered test benches for testing abradable seals at temperatures to 1100 deg. C.
-
product
Partial Discharge Test Equipment
Wuhan Huatian Electric Power Automation Co., Ltd.
Partial discharge detectors for high voltage equipment.
-
product
DI Lab System™
Comprehensive Product Engineering and Failure Analysis Lab system for complete device analysis and physical defect isolation.
-
product
Standard Systems With Customization
When the cable assembly product offerings on the website – cable, connectors, and markers – do not meet the needs of your application, Teledyne Storm Microwave provides our Standard with Features (SWF) offering. SWF allows the customization of your cable assembly needs by discussing your needs with our Applications Engineering professionals and without needing a detailed specification.
