-
Product
Electronic Control Units
-
Delivers high-performance real-time control, functional safety, and exceptional flexibility, making it ideal for demanding applications in off-highway machines and non-road vehicles.
-
Product
Post Wire and Die Bond Inspection Machine
IV-E1700
-
IV-E1700 is a post wire and die bond inspection machine that is known for having a proven, effective and patented 2D+3D Inspection system. This product is best used to weed out defects with data collection for process improvement and reports for SPC quality Control.
-
Product
Software Control
-
Probably our most important product feature, Process Control Master (PCM) is our user-friendly and process-oriented software control interface that is shipped with all turn-key, ready-to-use machines and multi-machine configurations. Flexible process control and scalable options enable customized assembly & test solutions suitable for early device development, for new product introduction, and for high-volume manufacturing (HVM) – no knowledge of programming is needed.
-
Product
Flush Diaphragm Pressure Sensors
-
Honeywell Industrial Automation
For high-frequency pressure measurements or in applications with severe space limitations, Honeywell Sensotec offers subminiature flush diaphragm pressure sensors in ranges from 0100 psi to 020,000 psi (010 to 01,400 bar). All-welded, machined stainless steel sensing diaphragms ensure ruggedness. Bonded piezoresistive and metal foil strain gauges offer high reliability. Millivolt and optional high-level outputs are compatible with most data acquisition systems.
-
-
Product
Digital Sequencers
-
The Analog Devices Super Sequencer ® portfolio offers a total power management platform for monitoring, measuring, sequencing, and margining a large number of voltages. Our comparators provide ±1% accurate monitoring of rails, while 12-bit ADCs offer voltage readback via a serial interface. Applications utilizing these devices benefit from sequencing that has been custom tailored to their needs by powerful state machine cores, as well as DAC banks to trim or margin regulators. Our digital sequencers include on-board EEPROM for storing devices parameters and for latching information for later analysis.
-
Product
Axial Force And Torsion Testing Machine
-
Evaluation Testing That Approximates Operating Conditions of Materials and Parts - Loading methods similar to actual usage - Allows simultaneous application of axial and torsional loads to samples
-
Product
No-Code IIoT Cloud Platform for OEMs and Machine Builders
-
Your product description goes here.
-
Product
External Fire Exposure Test Machine, Battery Safety Testing
-
Guangdong Bell Experiment Equipment Co.,Ltd
DGBELL external fire exposure test machine is applicable to the standard UL 2580.
-
Product
Hydraulic Universal Testing Machines
HW Series
-
Control Software is used to control the Universal testing machine. The Tester and the software are designed to accommodate a wide variety of testing needs. The software has a variety of pre-set programmed test cycles for compression, tensile and cyclical testing to meet a variety of testing standards.
-
Product
AMIDA 3001XP Tester
-
AMIDA has introduced two new analog/mixed-signal and logic options in the AMIDA-3000 series in recent years—the AMIDA-3001XP and AMIDA-3KS test systems. Both reinforce the AMIDA-3000 series' ability to provide cost-optimized test solutions for a variety of consumer components in power management and mobile device components. The AMIDA-3000 series provides more than twice the number of analog channels of its modules per test system, thus greatly reducing the acquisition cost of each channel and more than doubling the number of analog channels in the entire test system. This results in a higher number of parallel tests and a higher level of capability for this system, as well as a lower and more cost-effective IC unit test cost for this tester. This series of test systems provides a powerful test combination with high-speed hardware and software integration. The built-in instant messaging protocol detection function of AMIDA-3001XP test machine not only simplifies the complexity and difficulty of test development, but also greatly shortens the test time by using its high-speed computing capability.
-
Product
2D CMOS Image Sensor
Lince1M3
-
Lince1M3 is a CMOS digital image sensor optimized for applications (medical, ITS, industrial machine vision) requiring high-speed and high-resolution. The sensor incorporates a sophisticated readout channel with a high-accuracy 12-bit ADC to deliver the best quality images under any illumination condition.
-
Product
Sulfur Dioxide Test Machine
SQ-010
-
This instrument is designed according to GB/T2423.19-1981, GB/T2423.33-2005, ISO6988 (replaced DIN50018: 1988-06), DIN50900, DIN53210 and EC, MIL, ASTM etc to do sulfur dioxide gas corrosion test.
-
Product
Ground Leads Continuity Tester
-
Weshine Electric Manufacturing Co., Ltd
1. The new power supply technology is adopted in the grounding down lead conduction tester.2. It has the characteristics of small size, light weight, large output current, good repeatability, strong anti-interference ability and protection function. 3. The whole machine is controlled by single chip microcomputer, which has a high degree of automation. 4. The instrument has high precision and easy operation. The maximum current is 10A.
-
Product
Non Seal Type Snap Action Switches
-
Panasonic Industrial Devices Sales Company of America
Non Seal Type Snap Action Switches in various dimensions, current ratings, terminal choices, actuators, and operating force values. Applications include: Home Appliances, Vending Machines, Communication Equipment, Office Equipment, Industrial Equipment, Security Systems, Medical Equipment, Data Systems, Measuring Equipment and Audio Equipment.
-
Product
Inductor Test & Packaging Machine
1870D
-
The Chroma 1870D Series (1870D/1870D-12) are specifically Designed automated test equipment for chip inductors. It comprises Various test functions that are required for verifying chip inductors. In addition, an automated tape packaging machine at the end of production line is equipped to fulfill demand for automated manufacturing.
-
Product
Laser Marking Machine
-
Napco Precision Instruments Co
*Output Power: ≤75W*Wavelength: 1064nm*Beam Quality: ㎡＜3*Repeat frequency：≤50KHZ*Marking scope: 100mm X 100mm*Marking Depth: ≤0.5mm*Marking Speed: ≤8000mm/min*Min. line width: 0.015mm*Input Power: ≤1.5KW
-
Product
Analyzers
LC Series
-
The LC Series machines are low current, low power devices configured for management of low capacity batteries. These devices offer very high input resistance and have current control as low a 0.25 micro Ampere. These machines also offer 3 current ranges. Select the device that has the current ranges required for the intended application. Other voltage and current configurations are also available.
-
Product
Expert Partial Discharge Detector
XDP-II™
-
The well-established XDP-II™ is a battery-operated portable device allowing partial discharge detection and analysis. The data is saved in its internal memory for local or further analysis on the PC-based XDP-SOFT™. Paired with the proper accessories, the XDP-II™ becomes a powerful solution for many applications such as Cable Joints and Elbows, Switchgear, Offline, Acoustic, TEV, Rotating machines, Transformer, etc…
-
Product
Stationary Metal Analyzer
SPECTROCHECK
-
SPECTRO Analytical Instruments GmbH
The SPECTROCHECK stationary metal analyzer is specifically designed to meet the performance requirements — and the budgets — of small and medium-size foundries and machining operations. This high-quality, compact, affordable instrument is ideal for routine analysis of elemental content in iron-, aluminum-, and copper-based metals.
-
Product
COM Express Type 6 Compact Module With 6th Gen Intel® Core™ I7/i5/i3 And Celeron® Processor
CEM501
-
The CEM501 COM Express Compact Type 6 module is based on the latest 14nm 6th generation Intel® Core™ i7/i5/i3 processors (codename: Skylake) with support for up to 32 GB dual channel DDR4 SO-DIMM memory. Featuring improved processing and graphics performance compared to the previous generation Intel® processor, the compact-size system on module CEM501 offers intense graphics performance and multitasking capabilities, making it ideal for telecommunication, medical imaging, digital signage, gaming machines, military, and IoT related applications.
-
Product
Industrial PoE Camera
Phoenix
-
The Phoenix machine vision camera delivers the incredible quality and performance of Sony Pregius™ sensors – the industry leading global shutter CMOS sensor. Sony’s global shutter technology captures crystal clear, non-distorted images with exceptionally low read noise and very high dynamic range. Sony’s Pregius CMOS sensors used in the Phoenix cameras provide the imaging quality needed for today’s most challenging tasks
-
Product
Modal Analysis
-
The Modal Analysis package is part of m+p Analyzer, m+p international's dynamic signal analyzer for noise & vibration measurements and analysis. It provides a complete set of tools for observing, analysing and documenting the vibrational behaviour of machines and mechanical structures. Software modules are available for classical and operational modal analysis, shaker measurements (SIMO and MIMO) as well as for ODS, SDOF and MDOF analysis. A modal model validation module is also provided.
-
Product
VisionGauge Online Machine Vision Software
-
VisionGauge OnLine is a powerful machine vision software for automated inspection, verification and data collection . VisionGauge OnLine is extremely easy to setup and use. VisionGauge OnLine can be used for both in-line / in-process and sampling / off-line applications.
-
Product
Laser Distance Sensors (Time-of-Flight)
optoNCDT
-
Laser distance sensors are designed for non-contact distance measurements: laser gauges for measuring ranges up to 10m, laser distance sensors for up to 3,000m. These sensors are used for positioning and type classification in machine building and handling equipment.
-
Product
Phase Rotation Meter
PCE-PI 1
-
The digital phase rotation meter PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the phase rotation meter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.
-
Product
Angle Encoders With Integral Bearing
-
Featuring very high system accuracies, angle encoders with an integral bearing are ideal for demanding applications such as machine tools and printing machines. Thanks to the built-in bearing, the measuring accuracy of the encoder does not depend on the machine’s bearing.
-
-
Product
Universal Hardness Tester
-
A great advantage for testing labs is combining different test methods in one Universal hardness tester, which allows significant cost and space savings, flexibility and user-friendliness. Qualitest offers a competitive range of dead-weight models up to best selling load-cell type systems. These Universal hardness testers can cover Rockwell Regular, Superficial as well as Brinell and Vickers scales in one single machine.
-
Product
Compact Fanless System With AMD AM5 (LGA1718)
MIC-785
-
Support AMD AM5 architecture Ryzen™ Embedded 7000/9000 and EPYC 4005 ProcessorsHgih performance, high frenquency CPU computing and terrific graphic performance, suitable for machine vision and high end machine controller applicationAlign with MIC-770/780 design, one side IO, easy cablingSupport multi independent display; Versatile IO, GbE, USB 3.2, COM,Multiple storage 2 x 2.5" HDD/SSD and 1 x NVMe M.212 ~ 36 VDC input power range, fit in industrial deployementSupports FlexIO, iDoor and iModule technology, easy to configure your edge computing solutionSupports Advantech SUSI API and embedded software APIsOut of band control, supported by Advantech iBMC 1.2 technology
