Product

Industrial Gas Springs – Pull Type

-

ACE Controls Inc.

ACE Controls Inc.

If ACE gas push type springs cannot be used due to a lack of space, ACE's industrial gas pull type springs come into their own. These compact assistants with body diameters of 0.59“ to 1.57“ (15 to 40 mm) are effective in the direction of traction and work in the opposite way to the principle of gas push type springs.

Product

Non-contact Sheet Resistance Multi-points Measurement System With Wide Range

NC-80MAP

-

NAPSON Corp.

NC-80MAP - NAPSON Corp.

*Possible to measure wide range of sheet resistance by installing Max. 4 probes*Min. 7 mm position from edge can be measured*User programable measurement pattern & programmable measuring pattern

Product

Electronic Calibration Module, DC To 9 GHz, 2-Port

N7552A

-

Keysight Technologies

N7552A - Keysight Technologies

Reduce your calibration time by half with a smaller, lighter 2-port module that supports 3.5 mm or type-N 50 Ω connectors

Product

ITO (Indium Tin Oxide) Electrode

-

ALS Co., Ltd

ALS Co., Ltd

This quite unique material transmits only visible light whereas it does not transmit UV radiation. Our ITO electrodes consist of 100 nm thick of ITO layer deposited on quartz or borosilicate glass substrate (0.5 mm thick).

Product

Bally Flexometer

UI-FT17A

-

Unuo Instruments

UI-FT17A - Unuo Instruments

Bally Leather Flexing Tester is to determine flex resistance of leather in wet or dry condition. The flexometer is suitable to test all kinds of leather whose thickness is below 3 mm. As a leather testing machine, bally flex tester is commonly used to check the properties of leather and footwear /shoe upper materials.

Product

Magnetoresistive Milligauss Meter

MR3

-

Alpha Lab, Inc.

MR3 - Alpha Lab, Inc.

The MR3 Magnetoresistive Milligauss Meter measures and displays the three vectorcomponents (X, Y, Z) as well as the magnitude (M) of the static magnetic field. Update is two times per second. The three sensors are in a 25 mm (1") cube at the end of a flexible 100 cm (40") cable. It can be powered by 4 AA batteries (included) or a Worldwide AC adaptor (included). It can collect and store data (X, Y, Z and M) for later download or stream data live via USB connector. Both the instantaneous values of X, Y, Z and M, and their peak values, are displayed on the meter screen. "Peak" values are the highest values seen since the peak reset button was pressed. Maximum error of sensitivity is +/- 0.5 % of the reading, and the maximum error of the offset is +/- 0.50 milligauss. Range is +/- 1999.99 milligauss with resolution 0.01 milligauss (or 1 nT) over the full range, displayed simultaneously for X, Y, Z and M.

Product

ICT/FCT-Fixtures, Max UUT 370 × 300 mm (wxd)

CK-2 Medium (Hold Down Gate) / 230156

-

Columbia Elektronik AB

CK-2 Medium (Hold Down Gate) / 230156 - Columbia Elektronik AB

The series of In-Circuit testers that are Teradyne for the 228x and TestStation are dedicated tools that rely on the tester hardware for diagnostics and test pattern delivery. The integration of the stand-alone BTS with the Teradyne ICT can enhance the system’s capability. In other words, it can provide access to additional tools. It provides the user with a common platform and portability of test patterns from stand-alone to ICT and later on to functional test and depot test stations.

Product

Digital Input/Output Cards

PCI-DIO Series 24 and 48

-

Acces I/O Products, Inc.

PCI-DIO Series 24 and 48 - Acces I/O Products, Inc.

The PCI-DIO-48/48S, PCI-DIO-48JP/JPS, PCI-DIO-48JPL/JPLS, PCI-DIO-48H/HS and PCI-DIO-24S are 24- and 48-bit parallel digital input/output cards designed for use in PCI-Bus computers. The card is 6.9 inches (175 mm) long and may be installed in any 5-volt PCI slot in IBM and compatible computers.

Product

Adapter, 1.0 mm (f) to 1.85 mm (f), DC to 67 GHz

11921F

-

Keysight Technologies

11921F - Keysight Technologies

The Keysight 11921F precision 1.85 millimeter coax-to-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms impedance and frequency range from dc to 67 GHz.

Product

Calibrator, Calibrated w/Data, Current, 185 mm, 78 mm, 38 mm

72-6694 CAL D

-

Tenma

72-6694 CAL D - Tenma

The 72-6694 CAL D from Tenma is a current calibrator. It provides quality and accuracy of handheld calibrator of precision current source. It features large LCD display (maximum display counts 1999, 13mm (0.5") digit size). The current calibrator has 006P DC 9V, MN1604/PP3 battery or equivalent alkaline type or heavy duty type power supply. The dimension is 185mm × 78mm × 38mm (7.3" × 3" × 1.5") and weight is 265g/0.58lb (including battery). It has adjustable 0 to 24mA current source, 2 ranges (0 to 19.99mA (0.01mA display resolution, ±(0.25% FS + 1d) accuracy), 0 to 24mA (0.1mA display resolution, ±(0.5% FS + 1d) accuracy).

Product

SINE M-19 Sinusoidal Array

-

Applied Image, Inc.

Applied Image, Inc.

The Sinusoidal Array SINE M-19 is a remarkable new test array that achieves 256 cycles per mm while maintaining a significant modulation. It is designed for testing high resolution optical systems such as microscopes. Because its maximum width is 7.5mm, the SINE M-19 is small enough to fit easily onto a standard microscope slide (the TM-G variation is mounted in glass).

Product

Constant Temperature Anemometry (CTA) - Hot-Wire Anemometry - Thermal Anemometry

-

Dantec Dynamics A/S

Dantec Dynamics A/S

Constant Temperature Anemometry (CTA), also known as Thermal Anemometry, is a technique for the measurement of turbulence in 1, 2 or 3-dimensional gas and liquid flows, using hot-wire or hot-film probes inserted in the flow. CTA is particularly suitable for the measurement of flows with very fast fluctuations at a point (high turbulence) and the study of flow micro structures, where there is a need to resolve small flow eddies down to the order of tenths of a mm.

Product

Coaxial Waveguide Adapter, 1.85 mm (f), 50 to 67 GHz

V281A

-

Keysight Technologies

V281A - Keysight Technologies

The Keysight V281A adapter transforms waveguide transmission line into 50-ohm coaxial line. Power can transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3.