Product

Monochromatic High Power LED Light Sources

LS-HP1 Series

-

lightsource.tech GmbH

LS-HP1 Series - lightsource.tech GmbH

The LS-HP1 is a series of high-power, high brightness light sources for liquid light guides (LLG). It is characterized by its outstanding luminance and thus delivers very high light output from liquid light guides. The LS-HP1 works with the latest generation of high-power LEDs with up to 100W power from an area of less than 15mm². With the LS-HP1 series, we achieve the highest luminance levels through optimized optical coupling into the liquid light guide without heating it up too much. The LS-HP1 is available for liquid light guides with core diameters of 3 or 5mm.

Product

Digital Tach/Advance Timing Light

125

-

Electronic Specialties Inc.

125 - Electronic Specialties Inc.

*Professional Timing Light with High Visibility LED display Very bright display indicates: - Tach (RPM) - Degrees Advance *Measures ignition spark advance from 0-90 degrees *2 & 4 Stroke Tachometer measures engine speed up to 9,999 RPM *Brilliant Xenon flash at all speeds *Detachable & replaceable cable set *Designed for precise tuning and diagnostic work *Accurate up to 9,000 RPM *Works with 12 Volt electrical systems

Product

Light Source

UVM-SP-JW

-

SAN-EI ELECTRIC CO.,LTD.

UVM-SP-JW - SAN-EI ELECTRIC CO.,LTD.

Readouts of UV intensity and cumulative luminescence count are prompted either on the front panel or via the externally connected remote signal control. The UV intensity detection segment is intended to measure a specific intensity of light signals, while the cumulative luminescence count is designed to tally a cumulative count on all UV intensities measured, in conjunction with real-time calibration.

Product

Fully Automated In-line Test System For LED Light Engines

-

A.T.E. Solutions Ltd.

A.T.E. Solutions Ltd.

We are pleased to announce that we have received an order for the supply of a fully automated in-line test system for testing LED light engines from ASD Lighting, based in Rotherham. The solution provided, consists of an in-line handler fitted with a vision system. The camera software is capable of learning the position of all LED’s on a new pcb, thereby reducing the time to introduce a new product. In addition to identifying the location of any missing or faulty LED’s the tester measures the colour temperature of every pcb. An image is taken of faulty units with the location of any missing LED’s identified

Product

Excitation Light Source

-

Bunkoukeiki Co., Ltd

Bunkoukeiki Co., Ltd

Various spectral irradiation is possible by combining various light sources + spectroscope + irradiation system.We will also respond to special order correspondence. We will provide light suitable for your desired intensity such as light intensity and wavelength.

Product

SparkFun Ambient Light Sensor Breakout

TEMT6000

-

SparkFun Electronics

TEMT6000 - SparkFun Electronics

Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin.

Product

Tunable Deuterium and Tungsten-Halogen Light Sources

-

HORIBA, Ltd.

HORIBA, Ltd.

Deuterium and Tungsten-Halogen tunable light sources are convenient and affordable solutions for your laboratory experiments. Their optimized optical design, delivers efficient and power stabilized broadband optical power with variable aperture and selectable bandwidth with wavelength ranging from 180 nm up to 2 micron depending on your choice of the lamp.

Product

Monochromatic, Fiber-Coupled LED Light Sources

-

lightsource.tech GmbH

lightsource.tech GmbH

LED light sources in the LS-MC1 series provide a constantly growing selection – currently amounting to over 20 – of narrow band single wavelength LEDs with a bandwidth of 15-50 nm FWHM, allowing precise work in a defined wavelength range. As a result of optimized optical coupling into the optical fiber – as with all of our light sources – with our LS-MC1 series we have achieved the highest possible luminance. The advantage of directly emitting monochromatic LEDs is their very high level of efficiency, because the entire radiated output is in the useful wavelength range.

Product

Tower Light Monitor

1750-TLM

-

Potomac Instruments, Inc.

1750-TLM - Potomac Instruments, Inc.

Designed with the Broadcaster in mind the 1750-TLM provides built in flexibility to simplify even the most complicated installations. It can even alarm for single bulb failures on towers with Beacons and Obstruction lights on a single circuit. Status oututs eliminate the worry of operator interpretation and provide definitive Good-Bad indications for the operator and your logging equipment. Don’t let tower light failures expose you to increased liability, the 1750-TLM is compatible with most existing control equipment and may well provide your best return on investment this year!

Product

LED Uniform Light Sources

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Integrating sphere light source with LED illuminants (white, RGB-colored, NIR). Options available like variable output control and monitor detectors. We are experts in providing customer specific systems. Please contact us for all possible solutions and finding your perfect solutions. E.g. for EMVA 1288 Standard.

Product

Static & Lighting Chokes

-

LBA Group, Inc

LBA Group, Inc

Lighting chokes are used to pass tower lighting voltages across the base insulator of a series-fed tower without appreciably altering the tower impedance. LBA TC-300 general purpose tower lighting chokes are provided for three wire 110/220 VAC circuits. Maximum current is 25 amps. These chokes are rated for peak base voltages to 10,000 volts, and present a typical reactance of +j5000 ohms at 530 kHz. Bypass capacitors are provided on each winding.

Product

Spectral Light Meters For Photometric And Colorimetric Measurements

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Comprehensive range of spectroradiometers for the measurement of illuminance (lux), luminance (cd/m²), luminous flux (lumens), luminous intensity (cd) as well as the colorimetric characteristic values such as chromaticity coordinates (x,y,u',v') or color rendering index (CRI), etc.

Product

Light Sensor

NaPiCa

-

Panasonic Industrial Devices Sales Company of America

NaPiCa - Panasonic Industrial Devices Sales Company of America

Visible light sensor (Silicon Photo IC) that detects light and converts into electrical current. Consists of a photodiode and built-in amplifier. Optical filter provides spectral response similar to human eye sensitivity. Applications include: LCD Backlight Control, Commercial and Residential Lighting Brightness Control, Security Lighting.

Product

CO,CO,light and Sound Measurement

-

Testo AG

Testo AG

Everyone is exposed to different environmental influences in their day-to-day lives. For example, in an average workplace illuminance, sound level, and indoor air quality are all significant factors that influence people's performance and well-being. Testo offers suitable measuring instruments for controlling each of the measurement parameters of lux, sound, and CO2 (for indoor air quality).

Product

Ambient Light Sensors

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Renesas' ambient light sensors can adjust a display’s backlight, which improves user experience and power savings by optimizing the display’s viewability. Their ultra-low light sensitivity, low power consumption, ideal spectral response, and easy to use simple output algorithm make them best-in-class. We offer a full suite of light-to-analog and light-to-digital solutions to suit your applications requirements and budget.

Product

LFA-3000 Light Flicker Analyzer

-

Hangzhou Everfine Photo-E-Info Co., LTD

Hangzhou Everfine Photo-E-Info Co., LTD

LFA-3000 can simulate flickering measurement and analysis under various voltage fluctuation conditions, and the system has built-in standard voltage waveform database, one operation can complete the test and analysis of IEC 61547-1, convenient and fast. Meet the lighting product design, quality inspection and application of flickering test analysis needs.

Product

Fiber End Face Interferometer

-

Thorlabs, Inc.

Thorlabs, Inc.

Thorlabs' GL16 End Face Interferometer measures and images the end face geometry of single- and multi-fiber connectors. A non-contact technique called scanning white-light interferometry (SWLI) provides high accuracy, repeatability, and reliability for fiber connector testing, particularly for pass/fail testing using IEC or Telcordia requirements. The system can be controlled locally through the touchscreen display or remotely through a browser-based application (see Software tab for details), allowing it to be easily integrated on the production floor.

Product

Light I-V Testing for Modules

FMT-500

-

Sinton Instruments

FMT-500 - Sinton Instruments

Advanced analysis of solar modules including light I-V and Suns-Voc data. Capability to accurately measure high-efficiency modules.

Product

Forensic Light Source

CrimeScope CS-16-500W

-

HORIBA, Ltd.

CrimeScope CS-16-500W - HORIBA, Ltd.

The flagship of the SPEX Forensics Product Line, the CS-16-500W was designed for those departments that prefer the power and IR capabilities of 500W Xenon lamps.

Product

Light Sheet Microscopes

-

Carl Zeiss AG

Carl Zeiss AG

Life science research can place high demands on your imaging capabilities: Sometimes you need to image whole living model organisms, tissues and cells as they develop. Or you may want to observe subcellular dynamics in living samples over hours and even days. Light sheet fluorescence microscopy (LSFM) with its unique illumination principle is ideal for fast and gentle imaging of such specimens.

Product

Interferometer Systems

Verifire Series

-

Zygo Corporation

Verifire Series - Zygo Corporation

The Verifire™ interferometer system provides fast and reliable measurements of surface form error, and transmitted wavefront of optical components, systems and assemblies.