64 Channel ADC for VMEbus

The VME392 features 64 self-contained ADC channels with a resolution of either 12 or 16-bit (see ordering information). This product is ideally suited for mass acquisition with high accuracy for reasonable cost. The 64 channels are grouped into four sections of 16 channels each. Each section behaves completely independent from the other sections.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Topics

Family

VMEbus

AcQ Inducom

VMEbus (Versa Module Europa bus) is a computer bus standard widely used for many applications and standardized by the IEC as ANSI/IEEE 1014-1987. First developed in 1981 and continues to see widespread use today.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
M-Module Carrier for VMEbus (6U)

i4000 - AcQ Inducom

The i4000 is a 6U form factor M-module carrier for the VMEbus and forms the basis of a flexible I/O system. It offers the user a means of integrating a mix of M-modules in a VMEbus system. Four M-module mounting sockets are provided by this carrier.The interrupt controller on the i4000 has an interrupt vector register for each M-module interface.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
M-Module Carrier for VMEbus (3U)

i4001 - AcQ Inducom

The i4001 is a 3U form factor M-module carrier for the VMEbus and forms the basics of a flexible I/O system. It offers the user a means of integrating M-modules in a VMEbus system. The i4001 has one M-module slot. M-module interrupts can be passed to the VMEbus. The i4001 supports vector-from-module and vector-from-baseboard, this means that interrupt vectors are provided by the the M-module or by the i4001.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
6U Form Factor PMC/PrPMC Carrier-VMEbus

i4400 - AcQ Inducom

The i4400 is a low-cost 6U form factor PMC / PrPMC carrier for the VMEbus and forms the basis of a flexible I/O system. It offers the user a means of integrating two single PMC modules or one double PMC module in a VMEbus system. The current version of the i4400 supports PMC modules and also supports Processor PMC modules on one PMC-site. The VME-to-PCI bridge is implemented in an FPGA for flexible VME-to-PCI mapping and to allow future updates and upgrades.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
16 Channel ARINC-429 Controller for VMEbus

VME302 - AcQ Inducom

The VME302 provides sixteen ARINC-429 compatible channels (8x receive and 8x transmit) at any rate between 12.5 and 100kbps. Because the VME302 is built upon a flexible platform, the user interface is extremely versatile and user functions can be implemented almost without restriction, making this product flexible and user-friendly.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Audio Card I/O Modules

PIM481-J/DSUB - AcQ Inducom

The PIM481-J PMC I/O Module, with four 3.5mm stereo connectors and the PIM481-DSUB PMC I/O Module, with D-sub for rear I/O can be mounted on a rear transition module (RTM).

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Stepper Motor Controller for VMEbus

VME321 - AcQ Inducom

The VME321 Intelligent Stepper Motor Controller with Amplifiers is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. The local processor handles all high-level commands to provide maximum control for both straightforward as very complex applications.This VMEbus board has a 6U form and is also available as 3U VMEbus board.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Stepper Motor Controller for VMEbus

VME322 - AcQ Inducom

The VME322 Intelligent Stepper Motor Controller is designed to drive up to eight external Amplifiers. This is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. Local processors handles all high-level commands to provide maximum control for both straightforward as very complex applications.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Quadrature Incremental Decoder Interface for VMEbus

VME323 - AcQ Inducom

The VME323 is an Intelligent Quadrature Incremental Decoder VMEbus Board which can be configured for interfacing quadrature incremental encoders with or without an index channel. In index mode up to sixteen encoders with two quadrature channels and an index channel can be connected, and in non-index mode up to twentyfour encoders with two quadrature channels can be connected. The VME323 operates on two encoder input channels and decodes a pair of out-of phase signals in order to increment or decrement a counter.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
CANbus Controller for VMEbus

VME360 - AcQ Inducom

The VME360 CANbus controler is a 6U VMEbus board based on four SJA1000 CANbus controllers. Each SJA1000 provides an interface to the popular CANbus that supports both standard (11-bit) and extended (29-bit) identifier fields. Front panel LEDs provide diagnostical network information. The VME360 provides four CANbus interfaces. The CAN network is a serial communication protocol which efficiently supports distributed control with a high level of reliability.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Universal Timer/Counter for VMEbus

VME385 - AcQ Inducom

The VME385 Universal/Timer Controller VMEbus board is an ideal solution for automated test and measurement applications. The VME385 features eight timer/counter inputs, all inputs have an coaxial connector for the input range of +/- 10 V and high-voltage pins for the input range of +/- 300 V. The coupling of the inputs is either AC or DC. The VME385 provides 6 measurement functions: frequency, high-time, low-time, period, counter and phase measurements.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
RTD Measurement for VMEbus

VME390 - AcQ Inducom

The VME390 features 24 two, three or four wire high-accuracy PT100 measurement channels. Each channel has programmable alarm limits on which an interrupt can be issued.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List