M-Module Carrier for CompactPCI (3U)

The i3002 provides a high-performance CompactPCI bus gateway to the M-module interface. The i3002 has a 3U form factor. Two M-modules can be mounted on the i3002. The M-module interface of the i3002 complies with the M-module specification. The M-module interface feature A8, A24, D16 and D32 access types.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Topics

Family

CompactPCI

AcQ Inducom

CompactPCI is a computer bus interconnect for industrial computers, combining a Eurocard-type connector and PCI signaling and protocols. Boards are available in 3U or 6U sizes

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Stepper Motor Controller for CompactPCI

CPCI321 - AcQ Inducom

The CPCI321 Intelligent Stepper Motor Controller with amplifiers is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
ARINC-429 Controller for CompactPCI

CPCI302 - AcQ Inducom

The CPCI302 provides four ARINC-429 compatible channels (2x receive and 2x transmit) at any rate between 12.5 and 100kbps. Because the CPCI302 is built upon a flexible platform, the user functions can be implemented almost without restriction, making this product flexible and user-friendly.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Stepper Motor Controller for CompactPCI

CPCI322 - AcQ Inducom

The CPCI322 is a 3U CompactPCI card. The CPCI322 Intelligent Stepper Motor Controller is designed to drive external amplifiers. This is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
6 Channel Encoder Input Controller

CPCI323 - AcQ Inducom

The CPCI323 Quadrature Incremental Encoder Interface is designed to interface with up to six quadrature incremental encoders. This is an ideal solution for all applications where several encoders must be connected with a maximum of flexibility and a minimum of overhead.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
CANbus Controller

CPCI360 - AcQ Inducom

The CPCI360 CANbus controller is a 3U CompactPCI card based on the SJA1000. The SJA1000 provides an interface to the popular CANbus that supports both standard (11-bit) and extended (29-bit) identifier messages. Front LEDs provide diagnostic information.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
Universal Timer/Counter for CompactPCI

CPCI385 - AcQ Inducom

The CPCI385 Universal Timer/Counter CompactPCI card is an ideal solution for automated test and measurement applications. The CPCI385 features two timer/counter inputs. Both inputs have an coaxial connector for the input range of +/- 10 V and high-voltage pins for the input range of +/- 300 V. The coupling of the inputs is either AC or DC. The CPCI385 provides 6 measurement functions: frequency, high-time, low-time, period, counter and phase measurements.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
RTD Measurement for CompactPCI

CPCI390 - AcQ Inducom

The CPCI390 has a 3U form factor and features six 2-, 3-, or 4-wire high-accuracy RTD measurement channels. Each channel has programmable alarm limits on which an interrupt can be issued. The local DSP (TMS320C203) performs linearization, auto-calibration and alarm limit checking. Sensordata is available in °C, °F, K and Ohm. All inputs are optically isolated from the system.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
16 Channel ADC for CompactPCI

CPCI392 - AcQ Inducom

The CPCI392 16-Channel Common-Mode Input ADC card is very well suited to be used in applications in which autonomous signal conversion is an issue, as well as in standard mid-range applications. Enabled channels are scanned at maximum rate and conversion results are stored in shared memory. A local DSP performs the data acquisition and calibration transparent for the host.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
8 Channel ADC for CompactPCI

CPCI393 - AcQ Inducom

The CPCI393 8-Channel Differential Input ADC card is very well suited to be used in applications in which autonomous signal conversion is an issue, as well as in standard mid-range applications. Enabled channels are scanned at maximum rate and conversion results are stored in shared memory. A local DSP performs the data acquisition and calibration transparent for the host.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
12-/16-bit 16 Channel DAC for CompactPCI

CPCI395 - AcQ Inducom

The CPCI395 features 16 analog voltage outputs, integrated on the CompactPCI standard. Each output has a 12- or 16-bit resolution and a software programmable output range (0..+10V or -10..+10V). Control of the analog output is as easy as writing the binary equivalent to a dedicated register (per channel). Conversion takes place automatically. If desired, channels can be synchronized by presetting the channels and then give a simultaneous update command.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List
M-Module Carrier for CompactPCI (3U)

i3000 - AcQ Inducom

The i3000 M-module Carrier for CompactPCI features a 3U form factor CompactPCI gateway to the M-module interface. One M-module mounting socket is provided by this carrier. This carrier can be used in temperatures from -40°/+85°C. The M-module interface of the i3000 complies to the M-module Specification ANSI/VITA 12-1996. The interface features A8, A24, D16 and D32 access types.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List