Chassis Platform Accessories
Embedded Computing Systems require more than just a chassis housing with backplane, power supply, cooling and payload boards. To complement our wide range of systems, Elma offers a comprehensive range of system level accessories, including I/O solutions, HMI displays, system/power management controllers and test & development boards.
-
Unlisted Product
6U Conduction Cooled Chassis Manager
69-6165BC-CM
-
6U Conduction Cooled VITA 46.11 Chassis Manager
-
Unlisted Product
3U Conduction Cooled Chassis Manager
69-3165BC-CM
-
3U Conduction Cooled VITA 46.11 Chassis Manager
-
Unlisted Product
3U Air Cooled Chassis Manager
69-3165BV-LC
-
3U Air Cooled VITA 46.11 Chassis Manager
-
Unlisted Product
VITA 46.11 IPMC Test Board, VPX Test Card
69-3165BC-TC
-
VITA 46.11 compliant IPMC test board verifies communication across the IPMB
-
Unlisted Product
Source code for the Elma VITA 46.11 ChMC software
79-V46-CHMC-SW
-
Chassis Manager Source Code
-
Unlisted Product
IPMI Controller & software for CPCI-S Systems
IPMI-C-CS
-
The IPMI Controller software is pre-programmed on a Freescale K10 microcontroller and provides all (IPMI) functionality required by the PICMG 3.0 and CPCI specifications.
-
Unlisted Product
IPMI Controller & software for ATCA Systems
IPMI-C-AT
-
The IPMI Controller software is pre-programmed on a Freescale K10 microcontroller and provides all (IPMI) functionality required by the PICMG 3.0 and ATCA specifications.
-
Unlisted Product
IPMI Controller & software for VPX Systems
IPMI-C-VP
-
The IPMI Controller software is pre-programmed on a Freescale K10 microcontroller and provides all (IPMI) functionality required by the PICMG 3.0 and VPX specs.
-
Unlisted Product
IPMI Controller & software for AXIe systems
IPMI-C-AX
-
The IPMI Controller software is pre-programmed on a Freescale K10 microcontroller and provides all (IPMI) functionality required by the PICMG 3.0 and AXIe 1.0 specs.
-
Unlisted Product
3U CompactPCI Serial Power Interface Board
046-201
-
Standalone Power-BP 3U 8HP to connect CPCI Serial power supplies to compactPCI Serial-BPs. The connection is made via cables.
-
Unlisted Product
3U VPX Chassis Manager Carrier and Mezzanine Board
064-759
-
Chassis manager mezzanine board installed on a 3U VPX carrier board. The plug-in carrier board provides all interfaces via the rear connectors. This board set can be used together with chassis installed adapter board or plug directly into a backplane slot.
-
Product
VME Test Extender 9U/220mm J1/J2/J0
111EXT9122-0120
-
The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the DIP switches.
-
Product
700 W VITA62 PSU | conduction cooled | 6 U | 5 HP | DC
MS216479+RC
-
Designed to meet the requirements of VITA 62 for use in harsh environments. For use in DC systems, they are 6 U high by 5 HP (1-inch) wide modules with guide blocks, for use in conduction cooled VPX systems.
-
Product
Standard Slide Rail Size 3
65-051
-
Automatic release in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Unlisted Product
28 Volt DC Shelf Manager carrier card
28V-SM-CARR
-
The 28VDC carrier card provides all the connectors necessary for the monitoring and control functions of any Elma systems, and also the power supply filtering required by the noise and transients consistent with MIL-STD-704E.
-
Product
28 Volt DC Shelf Manager carrier card with conformal coating
28V-SM-CARR-C
-
The 28VDC carrier card with confirmal coating provides all the connectors necessary for the monitoring and control functions of any Elma systems, and also the power supply filtering required by the noise and transients consistent with MIL-STD-704E.
-
Product
50 W | 11.4-36 VDC | 4 outputs | PSU PCI/104 for SFF
PCI104-SFF-IPSU-11-36-4
-
This rugged isolated power supply is capable of supplying up to 50 W of power across four (dual 5 V and dual 3.3 V) output for a range of sensitive defense applications as well as industrial applications.
-
Product
120 W | 15 - 36 VDC | 5 outputs | PSU PCI/104 for SFF
PCI104-SFF-IPSU-15-36
-
This rugged isolated power supply is capable of supplying up to 120 watts of power output for a range of sensitive defense applications as well as industrial applications.
-
Product
120 W 16.5 - 50 VDC 5 outputs PSU PCI/104 SFF
PCI104-SFF-IPSU-16-50-C
-
This rugged isolated power supply is capable of supplying up to 120 watts of power output for a range of sensitive defense applications as well as industrial applications - with conformal coating.
-
Product
350 W VITA 62 PSU Conduction Cooled 3 U-5 HP-AC
69-MS215342-RC
-
Designed to meet the requirements of VITA 62 for use in harsh environments. For use in AC systems, they are 3 U high by 5 HP (1-inch) wide modules with guide blocks, for use in conduction cooled VPX systems.
-
Product
25 W 11.4-36 VDC | 2 outputs | PSU PCI/104 SFF | conduction-cooled
PCI104-SFF-IPSU-11-36-2-C
-
This rugged isolated power supply is capable of supplying up to 25 W of power output across two (one 5 V and one 3.3 V) output for a range of sensitive defense applications as well as industrial applications. With conformal coating.
-
Product
120 W-15 - 36 VDC-5 Outputs-PSU PCI/104 SFF
PCI104-SFF-IPSU-15-36-C
-
This rugged isolated power supply is capable of supplying up to 120 watts of power output for a range of sensitive defense applications as well as industrial applications - with conformal coating.
-
Product
50 W-11.4-36 VDC-4 Outputs-PSU PCI/104
PCI104-SFF-IPSU-11-36-4-C
-
This rugged isolated power supply is capable of supplying up to 50 W of power across four (dual 5 V and dual 3.3 V) output for a range of sensitive defense applications as well as industrial applications. With conformal coating.
-
Product
350 W VITA 62 PSU-Conduction Cooled
69-MS215686-RC
-
Designed to meet the requirements of VITA 62 for use in harsh environments. For use in AC systems, they are 3 U high by 5 HP (1-inch) wide modules with guide blocks, for use in conduction cooled VPX systems.
-
Product
Sentry System Manager
SENTRY-III-D
-
The Sentry III Diagnostic Monitor is a microprocessor-based instrument for monitoring and controlling the power supplies, fans, etc. in an Elma chassis.
-
Unlisted Product
300 W VITA 62-PSU Conduction Cooled
064-112
-
300 W DC/DC PSU VITA 62 with hold-up module for conduction cooled applications and BIT controller
-
Product
AdvancedTCA Shelf Manager ShMM700, 280 mm Board
ShMM-700
-
The 3rd generation Elma ATCA Shelf Manager incorporates bussed IPMB signals. Dual SHMMs can be plugged into slot 0 of an Elma chassis, without taking up any of the 14-slots.
-
Unlisted Product
700 W VITA 62 PSU Conduction Cooled-6 U-5 HP-AC
MS217765+RC
-
Designed to meet the requirements of VITA 62 for use in harsh environments. For use in AC systems, they are 6U high by 5HP (1-inch) wide modules with guide blocks, for use in conduction cooled VPX systems.
-
Unlisted Product
VITA 46.11 Chassis Manager Assembly for OpenVPX Systems
SM-VP-CC-INT
-
Our VITA 46.11 VPX Chassis Manager monitors system health and takes any necessary corrective action. It features a redundant IPMB, provides power management and cooling control, event sensor logging, electronic keying, and card hot-swap monitoring.
-
Product
Chassis Slide Rail Size 5
65-052
-
Automatic release in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Product
Chassis Slide Rail Size 7
65-053
-
Automatic release in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Product
Chassis Slide Rail Size 3
CAE014621
-
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Product
Chassis Slide Rail Size 5
CAE010393
-
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Product
Chassis Slide Rail Size 7
CAE011080
-
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Product
Chassis Rugged Slide Rail Size 5
CAE016383
-
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Product
Chassis Rugged Slide Rail Size 7
CAE016384
-
Securely locked in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.
-
Product
LED Display for SysMon
060-013
-
LED Display accessory for System Monitor (SysMon) with 11 LEDs and push button to generate a SYSRESET# signal directly from the front of the system.
-
Unlisted Product
300 W VITA 62 PSU Conduction Cooled-3 U-5 HP
062-142
-
300 W DC/DC PSU VITA 62 for conduction cooled applications with IPMI controller
-
Product
200 W VITA 62 PSU Conduction Cooled-3 U-5 HP
060-392
-
200 W DC/DC PSU VITA 62 for conduction cooled applications.
-
Product
Hold-Up Power Module - PCB Only Without Cover
055-149
-
Hold-Up Power Module for voltage input of 16 to 36VDC provides maximum power output of 330W for 50ms per MIL-STD 704 / DO160. Board can be ordered as fixed-mount or plug-in version.
-
Unlisted Product
VITA 46.11 Chassis Manager Source Code, Designed In Alignment With SOSA
79-V46-CHMC-SW-S1
-
Elma’s SOSA aligned VITA 46.11 Chassis Manager is available as a source code license for integration into custom Chassis Manager implementations.
-
Product
Hold-Up Power Module With Optional Cover
064-474
-
Hold-Up power module for voltage inputs from 16 to 36VDC provides up to 330W of hold-up power for 50ms. Designed in compliance with MIL-STD-704 / DO160. The board can be ordered as a fixed mount or plug-in version.
-
Unlisted Product
IPMI Controller & Software For VPX Systems Aligned With SOSA Standard
IPMI-C-VP-S1 and 79-V48-3-IPMC-TB-S1
-
Elma‘s VITA 46.11 Intelligent Platform Management Controller (IPMC) for VPX is a pre-programmed part and source-code package created to give designers a quick path to integrating VITA 46.11 system management functionality onto their board designs.
-
Unlisted Product
IPMI Controller & Software For AXIe, ATCA, And CPCI Serial Systems
IPMI-C-xx
-
The IPM Controller software is pre-programmed on a Freescale K10 microcontroller and provides all intelligent platform management interface (IPMI) functionality required by the VITA46.11, PICMG 3.0 and AXIe 1.0 specifications.
-
Product
300 W VITA 62 PSU Conduction Cooled | 3 U | 5HP
065-862
-
300 W DC/DC PSU VITA 62 for conduction cooled applications with IPMI controller.
-
Unlisted Product
VME Test Extender 6U/220mm J1/J2
111EXT6122-012X
-
The VME extender boards are designed to bring a circuit card completely out of a card cage so that it can be tested or debugged on both sides of the test board. Each signal, power, and ground line can be individually isolated with the DIP switches.
-
Product
3U VITA 62 Power Supply Module, 300W With Hold Up Power, Conduction Cooled
064-112
-
Designed to VITA 62, this 3U x 9HP DC power supply module is conduction-cooled and provides up to 50ms hold-up time and a BIT controller.
