High-Sensitivity Tri-Axial Accelerometer with Built-In Preamplifier

NP-7310 - Ono Sokki

NP-7310 is the accelerometer with built-in preamplifier, and capable of tri–axial directions simultaneous measurement. It is suitable for the low frequency vibration measurement such as ground vibration or floor vibration while operating the machine. NP-7310 can be used with the sensor amplifier unit such as AU-2100, AU-2300 or PS-1300. Also, it is possible to input directly to the analyzer or recorder which the constant current amplifier is built-in such as the FFT Analyzer of DS-2000 series, DS-3000 series, CF-7200A, CF-9000 series or CF-3650/3850 series.

Product Home Contact/Sales Company Catalog Share Add To List

Sound & Vibration

Ono Sokki

Ono Sokki Sound & Vibration measurement products - sound level meter, microphone & amp, accelerometer, vibration, laser doppler vibrometer, and related software.

Product Home Contact/Sales Company Catalog Share Add To List
Portable Data Recorder For Acoustics & Vibration

DR-7100 - Ono Sokki

The DR-7100 is a portable data recorder for acoustic and vibration with high accuracy.

Product Home Contact/Sales Company Catalog Share Add To List
Sound Calibrator

SC-3120 - Ono Sokki

The SC-3120 Sound Calibrator is a precise standard sound source of piston-phone type which accurately calibrates a sound level meter. It drives the piston in the cylinder in reciprocating motion to generate sine-wave sound having a fixed sound pressure level.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
High Performance Sound Level Meter

LA-7000 series - Ono Sokki

The LA-7000 series is newly designed sound level meter which operation procedure has been greatly improved. The large color LCD and touch panel enable easy and intuitive operation.

Product Home Contact/Sales Company Catalog Share Add To List
Sound Level Meters

LA-4441A|LA-1411/1441A - Ono Sokki

Three models of sound level meter LA-1411/1441A(Class 2) and LA-4441A (Class 1) are applicable to IEC 61672-1:2013, JIS C 1509- 1:2017. The all models can perform simultaneous measurement of seven sound parameters including equivalent continuous sound level without adjusting the level range corresponding to the sound fluctuation and display the selected parameters.

Product Home Contact/Sales Company Catalog Share Add To List
1/2-inch Microphone/ Preamplifier

MI series - Ono Sokki

There are MI-1271, 1/2-inch back electrets-type microphone which has improved the environmental stability against temperature and humidity, MI-1235 which emphasizes on a wide frequency range and MI-1433 which realizes a similar environmental resistance at a low price. MI series microphone is used in combination with the preamplifier and the microphone. Since microphone and preamplifier are not built-in type, installation costs can be reduced in the event of a fault.

Product Home Contact/Sales Company Catalog Share Add To List
1/4-inch Measurement Microphone and Preamplifier

MI-1531/MI-3140 - Ono Sokki

The 1/4-inch diameter condenser microphone MI-1531 with its preamplifier MI-3140 enable to measure the high frequency band more than 20kHz which it is impossible by using the 1/2-inch microphone. Amplifier is not required in use as it is a back electret-type condenser microphone, which differs from a bias-type microphone. And also, the MI-1531 achieves a measurement at Max. 168 dB as a performance of a microphone itself.

Product Home Contact/Sales Company Catalog Share Add To List
TEDS Microphone

MI-1271M12 - Ono Sokki

The MI-1271M12 TEDS Microphone consists of 1/2-inch Free-field electrets-type condenser microphone and preamplifier conforming to the IEC 61094-4 Type WS2F.By adopting the titanium vibrating membrane of the microphone and improving electrets performance, it realizes long-term stability and wide frequency range of 1 Hz to 20 kHz. It can be used in wide temperature range of -30℃ to +80℃.

Product Home Contact/Sales Company Catalog Share Add To List
Directional Microphone

MI-8100 - Ono Sokki

MI-8100 is a shotgun type directional microphone which sharply catches the intended sound. This directional microphone is helpful for the removal of background noise in the simple sound source exploration and in abnormal sound detection. Flat frequency characteristic from 50 Hz to 20 kHz and sharp detection with high S/N ratio provide high sensitive detection of various sound coming from the specific direction. By combining the acoustic vibration monitor BL-1100, only the intended frequency or sound is focused and caught clearer.

Product Home Contact/Sales Company Catalog Share Add To List
Ultraminiature Microphone

MB-2200M10 - Ono Sokki

MB-2200M10 is an ultra compact and lightweight microphone that enables measurement in narrow spaces, where have been difficult to install, without giving influence to the sound field.Its compact and lightweight features make you possible to perform measurements in a limited space, such as multi-point measurement, and measurement near the sound source. As CCLD type, the MB-2200M10 can be connected to Ono Sokki’s FFT Analyzer or CCLD supported devices.

Product Home Contact/Sales Company Catalog Share Add To List
2-Ch Sensor Amplifier

SR-2210 - Ono Sokki

The SR-2210 sensor amplifier accepts constant-current line drive sensors and connects the signal to analyzers and recorders that would not otherwise be compatible with constant-current sensors.The units connects directly with BNC connectors to ONO's model MI-3111 microphone preamplifiers and NP-3000 series of accelerometers.With compact, light-weight, battery operation, it can save for preparation of measurement.

Product Home Contact/Sales Company Catalog Share Add To List
Sound and Vibration Real-Time Analysis System

DS-3200 series - Ono Sokki

The DS-3000 series Data Station is a PC-based FFT Analyzer with high functions and high performance. This new FFT Analyzer has two times or more of real-time analysis capability compared to the existing model the DS-2000 series, having the high-speed calculation performance, reliability, and user-friendliness based on our accumulated experience.

Product Home Contact/Sales Company Catalog Share Add To List
Accelerometer (Charge Output Type)

NP-2000 Series - Ono Sokki

This sensor converts mechanical vibrations into electric signals in proportion of vibration acceleration.You can choose the one that is ideal for your purpose,conditions,applications etc. from wide variety of selection.Charge amplifier is necessary because it is a charge output type,however, compared to pre-amplifier built-in type, it can be used at higher temperature in general.

Product Home Contact/Sales Company Catalog Share Add To List
Accelerometer with Built-In Preamplifier

NP-3000 series - Ono Sokki

This sensor converts mechanical vibrations into electric signals in proportion of vibration acceleration."The NP-3000 series offers ultra-small masses of 0.4g, tri-axial type which can obtain vibration directions of XYZ at once, waterproof, high sensitive type, and so on. You can choose the most suitable detector according to the purpose of use, operation conditions, and applications. Since the preamplifier is built in the detector main body of the NP-3000 series, sensor signal input part can be made relatively inexpensively and it can be directly connected to analysis equipment such as our FFT analyzer."

Product Home Contact/Sales Company Catalog Share Add To List
Tri-Axial Accelerometers with Built-In Preamplifier/Charge Output Type

Ono Sokki

The tri-axis acceleration detector is an accelerometer that can output electric signals in proportion of vibration acceleration, which has been converted from mechanical vibrations, at the same time from XYZ three vibration directions. Various types of accelerometers are provided including built-in preamplifier type, charge output type, and TEDS compatible type.

Product Home Contact/Sales Company Catalog Share Add To List
3-Ch Sensor Amplifier

PS-1300 - Ono Sokki

The PS-1300 3-Ch Sensor Amplifier is designed to be compact and light weight, and able to be used in combination with a tri-axial accelerometer. Each channel can also be used independently and connected with a single axis accelerometer. The PS-1300 has built-in integration function and enables to optimize the input signal to vibration data analysis devices connected.

Product Home Contact/Sales Company Catalog Share Add To List
Charge Amplifier

CH-1200A - Ono Sokki

CH-1200A is a high-performance charge amplifier to convert charge signal to voltage signal. Built-in integration function allows optimization of the signal which is input to the vibration data analyzer connected.Changing into a multi-channel amplifier is easy by connecting multiple units.

Product Home Contact/Sales Company Catalog Share Add To List
Acceleration Pickup Calibrator

VX-1100A - Ono Sokki

VX-1100 is for a piezoelectric type accelerometer which is widely used for measuring vibration. This compact calibrator is effective for checking operation(sensitivity) sensors before measurement to acquire accurate data.Built-in sensor amplifier and display in one unit allows direct reading of the sensitivity. This calibrator excites the sensor at a frequency of 159 Hz and acceleration of 10 m/s2 rms, and the sensor outputs can be used as calibration signals for a vibration measuring system.

Product Home Contact/Sales Company Catalog Share Add To List
Vibration Comparator

VC-2200/3200 - Ono Sokki

The VC-2200/3200 is a Vibration comparator which is used for maintenance and constant monitoring of production facilities with high accuracy, high function, and low cost in a single unit.

Product Home Contact/Sales Company Catalog Share Add To List
Laser Doppler Vibrometer

LV-1800 - Ono Sokki

The LV-1800 non-contact type Laser Doppler Vibrometer uses newly designed interference optical system and has achieved improvement of detection sensitivity by 20 dB compared to the conventional models. The built-in positioning camera makes it easy to check the target by laser beam irradiation.

Product Home Contact/Sales Company Catalog Share Add To List
Laser Doppler Surface Velocity Meter

LV-7000 series - Ono Sokki

The LV-7000 series detects speed, uneven speed, distance, length of moving object or rotating object without contact. By contacting with 2 sensors, it enables to calculate difference in velocity/length between the two points in real time and output with 3,000 ppm of accuracy. The frequency response can be expanded up to 20 kHz, which achieves to understand phenomena and evaluate mechanical systems at high speed, efficiently, and accurately. It is useful for evaluation of motor control and behavior measurement, improving parts quality, and reducing loss of material.

Product Home Contact/Sales Company Catalog Share Add To List
Sound Calibrators

SC-2500/SC-2120A - Ono Sokki

Ono Sokki provides three types of sound calibrator to meet various needs. SC-2500 is newly developed calibrator using sound pressure feedback control method for a Class 1 sound level meter. SC-2120A is used for calibration of Class 2 sound level meter which is dynamic speaker type.

Product Home Contact/Sales Company Catalog Share Add To List
Charge Converter

CH-6130/6140 - Ono Sokki

The CH-6130/6140 charge converter is a simplified type of charge amplifier converting charge signal to voltage.It can be connected directly to an input BNC connector of a CCLD applicable equipment such as FFT analyzer or vibration comparator, enabling direct connection of a charge output pickup without suing a box type amplifier.

Product Home Contact/Sales Company Catalog Share Add To List