60 V Common Mode Differential Probes

Oscilloscope Probes

Teledyne LeCroy has a wide variety of world class probes and amplifiers to complement its product line. From the ZS high impedance active probes to the WaveLink differential probing system which offers bandwidths up to 25 GHz, Teledyne LeCroy probes and probe accessories provide optimum mechanical connections for signal measurement.

Product Home Contact/Sales Company Catalog Share Add To List

High Voltage Optically Isolated Probes

DL10-ISO - Teledyne LeCroy

The DL-ISO enables highest confidence in GaN and SiC device characterization with highest accuracy, best signal fidelity, and comprehensive connectivity.

Product Home Contact/Sales Company Catalog Share Add To List

High Voltage Optically Isolated Probes

DL07-ISO - Teledyne LeCroy

The DL-ISO enables highest confidence in GaN and SiC device characterization with highest accuracy, best signal fidelity, and comprehensive connectivity.

Product Home Contact/Sales Company Catalog Share Add To List

High Voltage Optically Isolated Probes

DL03-ISO - Teledyne LeCroy

The DL-ISO enables highest confidence in GaN and SiC device characterization with highest accuracy, best signal fidelity, and comprehensive connectivity.

Product Home Contact/Sales Company Catalog Share Add To List

Differential Probes < 1.5GHz

Teledyne LeCroy

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point

Product Home Contact/Sales Company Catalog Share Add To List

Differential Probes 4-6 GHz

Teledyne LeCroy

Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point. Dx10/Dx20/Dx00A-AT 4-6 GHz differential probes are a general purpose probing solution with high input dynamic range and offset.

Product Home Contact/Sales Company Catalog Share Add To List

Differential Probes (8-30 GHz)

Teledyne LeCroy

The DH series of 8 to 30 GHz active differential probes provides high input dynamic range, large offset capability, low loading and excellent signal fidelity with a range of connection options.

Product Home Contact/Sales Company Catalog Share Add To List

High Voltage Differential Probes

Teledyne LeCroy

High voltage differential probes provide high CMRR over a broad frequency range (up to 400 MHz) to simplify the measurement challenges found in noisy, high common-mode power electronics environments. The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.

Product Home Contact/Sales Company Catalog Share Add To List

High Voltage Optically Isolated Probes

Teledyne LeCroy

High Voltage Optically Isolated Probes are designed to aid in device characterization measurements. Whether it is low or high voltage signals sitting on HV busses, high bandwidth, extreme precision, and optical isolation means floating measurements are easily made with minimal DUT loading.

Product Home Contact/Sales Company Catalog Share Add To List

High Voltage Passive Probes

Teledyne LeCroy

The PPE6KV-A and HVP120 can handle up to 6000 Vpeak transient overvoltages and are designed for probing up to 2000 Vrms and 1000 Vrms respectively. Fast rise times, excellent frequency response, and a variety of standard accessories make these probes safe and ideal for high voltage measurement applications

Product Home Contact/Sales Company Catalog Share Add To List

Active Voltage Probes

Teledyne LeCroy

Your product description goes here.

Product Home Contact/Sales Company Catalog Share Add To List

Active Voltage Rail Probe

Teledyne LeCroy

Voltage rail probes are designed specifically to probe a 50 Ohm DC power/voltage rail. The probe has large built-in offset, low attenuation (noise), and high DC input impedance. Built-in offset and low attenuation permit the power/voltage rail to be offset in the oscilloscope by its mean DC voltage with high oscilloscope gain (sensitivity) to achieve a noise-free view of small signal variations. The high DC input impedance eliminates loading of the DC rail.

Product Home Contact/Sales Company Catalog Share Add To List

Current Probes

Teledyne LeCroy

Teledyne LeCroy current probes do not require the breaking of a circuit or the insertion of a shunt to make accurate and reliable current measurements. Based on a combination of Hall effect and transformer technology, Teledyne LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements.

Product Home Contact/Sales Company Catalog Share Add To List

500 MHz Passive Probe, 2.5mm, 10:1, 10 MOhm

PP023-1 - Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.

Product Home Contact/Sales Company Catalog Share Add To List

Passive Probes

Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a /10 attenuation and feature a high input resistance of 10 MOhm. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.

Product Home Contact/Sales Company Catalog Share Add To List

Transmission Line Probes

Teledyne LeCroy

Transmission line probes are a special type of passive probe designed for use at very high frequencies. They replace the high impedance probe cable found in a traditional passive probe with a precision transmission line, with a characteristic impedance that matches the oscilloscope input (50 Ohm). This greatly reduces the input capacitance to a fraction of a picofarad, minimizing the loading of high frequency signals. A matching network at the tip increases the DC input resistance. While they have lower DC input resistance than a traditional passive probe (usually 500 Ohm) to 1kOhm), the input impedance of these probes remains nearly constant over their entire frequency range. A traditional /10 passive probe will have a 10 MOhm) input impedance at DC, however this impedance drops rapidly with frequency, passing below the input impedance of a transmission line probe at less than 100 MHz.

Product Home Contact/Sales Company Catalog Share Add To List

Probe Adapters

Teledyne LeCroy

Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.

Product Home Contact/Sales Company Catalog Share Add To List

Probe Parts and Kits

Teledyne LeCroy

There are a variety of replacement and additional probe parts, tips and accessories

Product Home Contact/Sales Company Catalog Share Add To List

250 MHz 60 V Common Mode Differential Probe

DL02-HCM - Teledyne LeCroy

60 V of common mode and 80 V differential input range with 1 GHz of bandwidth, make these probes ideal for lower voltage GaN power conversion measurements. The 60 V of common mode is well suited for handling any float of the battery and bulk/absorption voltage during charging, while the 80 V differential input range provide margin for any overshoot.

Product Home Contact/Sales Company Catalog Share Add To List

500 MHz 60 V Common Mode Differential Probe

DL05-HCM - Teledyne LeCroy

60 V of common mode and 80 V differential input range with 1 GHz of bandwidth, make these probes ideal for lower voltage GaN power conversion measurements. The 60 V of common mode is well suited for handling any float of the battery and bulk/absorption voltage during charging, while the 80 V differential input range provide margin for any overshoot.

Product Home Contact/Sales Company Catalog Share Add To List

1 GHz 60 V Common Mode Differential Probe

DL10-HCM - Teledyne LeCroy

60 V of common mode and 80 V differential input range with 1 GHz of bandwidth, make these probes ideal for lower voltage GaN power conversion measurements. The 60 V of common mode is well suited for handling any float of the battery and bulk/absorption voltage during charging, while the 80 V differential input range provide margin for any overshoot.

Product Home Contact/Sales Company Catalog Share Add To List

DL-HCM Series High-Temperature Solder-In Tip

DL-HCM-HiTemp - Teledyne LeCroy

60 V of common mode and 80 V differential input range with 1 GHz of bandwidth, make these probes ideal for lower voltage GaN power conversion measurements. The 60 V of common mode is well suited for handling any float of the battery and bulk/absorption voltage during charging, while the 80 V differential input range provide margin for any overshoot.

Product Home Contact/Sales Company Catalog Share Add To List

DL-HCM Series Accessories Kit with Probe Holder, Micro IC Grabbers (Qty. 2), and Y-Banana Adaptor

DL-HCM-Acc-Kit - Teledyne LeCroy

60 V of common mode and 80 V differential input range with 1 GHz of bandwidth, make these probes ideal for lower voltage GaN power conversion measurements. The 60 V of common mode is well suited for handling any float of the battery and bulk/absorption voltage during charging, while the 80 V differential input range provide margin for any overshoot.

Product Home Contact/Sales Company Catalog Share Add To List

60 V Common Mode Differential Probes

Topics