Beam Bender

Beam Directing and Reflecting Optics

Beam directing and reflecting optics simply reflect, bend or translate the beam, but do not typically modify the polarization, except for polarizing beam splitters. For example, mirrors, cube corners and retroreflectors are attached to objects that move in order to keep the weight down on the moving object (instead of mounting the interferometer on the moving object).

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

1-Inch Cube Corner

10713B - Keysight Technologies

The Keysight 10713B cube corner reflector can be used as the measurement reflector for linear measurements. It may be paired with either the 10702A Linear Interferometer or the 10705A Single-Beam Interferometer. Supplied without housing, the 10713B is suited to applications where mass is extremely critical.

Product Home Contact/Sales Company Catalog Share Add To List

High-Stability Adapter

10723A - Keysight Technologies

The Keysight 10723A high-stability adapter converts the 10706A Plane Mirror Interferometer into an 10706B High-Stability Plane Mirror Interferometer. The 10706B is a thermally-stable optic with measurement drift reduced to approximately 1/12 the value achieved by conventional plane mirror interferometers.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Retroreflector

10703A - Keysight Technologies

The Keysight 10703A retroreflector (cube corner) is a basic measurement reflector for linear measurements. It is paired with the Keysight 10702A (or Keysight 10702A Opt. 001) linear interferometer, enabling general-purpose, single-axis measurements. If mass is critical, the Keysight 10703A is available without housing as the 10713B.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Turning Mirror on Universal Mount

10769B - Keysight Technologies

The Keysight 10769B Turning Mirror on Universal Mount deflects a laser beam at any angle, in either the vertical or the horizontal polarization plane of the beam. The 10769B contains the same turning mirror as the 10769A, but has a different mounting.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

1/4-Inch Cube Corner

10713D - Keysight Technologies

The Keysight 10713D is one component of a family of measurement optics that tailor interferometer systems for the physical layout and measurement requirements of individual applications. Configured with appropriate laser head and system electronics, the optics are part of a precise positioning system that improves product quality, increases yields, and facilitates manufacture of precision products.

Product Home Contact/Sales Company Catalog Share Add To List

Plane Mirror Reflector

10724A - Keysight Technologies

The Keysight 10724A reflector is used with the Keysight 10706A, 10706B, 10715A and 10716A interferometers for single-axis measurements. It can also be used with the Keysight 10737L/R Compact Three-Axis Interferometers. Alignment hardware is included.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Plane Mirror Converter

10722A - Keysight Technologies

The Keysight 10722A plane mirror converter modifies the use of the 10702A linear interferometer. With an additional 10703A reflector, the 10722A converts the 10702A into a 10706A plane mirror interferometer. With an additional 10723A high-stability adapter, the 10722A converts the 10702A into an 10706B high-stability plane mirror interferometer.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Plane Mirror

10728A - Keysight Technologies

The Keysight 10728A is a normal incidence plane mirror for beam diameters of 9 mm or less. It is a bare optic that requires a user-supplied mount. It is typically used with the 10735A and 10736A three axis interferometers.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Beam Bender BK7, Fixed Vertical-Bend Mount

E1834Z - Keysight Technologies

The E1834Z is a beam bender that bends the incoming beam at a 90-degree angle and is designed for beam diameters of 9 mm or less. This referenced optics uses high performance vertical mount to deliver laser beam throughout a measurement system. The 8 flexure feet are designed for stable beam pointing.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Beam Bender BK7, Fixed Horizontal-Bend Mount

E1834M - Keysight Technologies

The E1834M is a beam bender that bends the incoming beam at a 90-degree angle and is designed for beam diameters of 9 mm or less. This referenced optics uses high performance horizontal mount to deliver laser beam throughout a measurement system. The 8 flexure feet are designed for stable beam pointing.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Beam Bender

10726A - Keysight Technologies

The Keysight 10726A bends the incoming beam at a 90-degree angle and is designed for beam diameters of 9 mm or less. This bare optic requires a user-supplied mount.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

67% Beam Splitter BK7, Fixed Horizontal-Bend Mount

E1834J - Keysight Technologies

The E1834J is a 67% beam splitter in a high performance horizontal mount that offer the high pointing stability for Keysight laser interferometer measurement system. The 8 flexure feet are designed for stable beam pointing.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

50% Beam Splitter BK7, Fixed Horizontal-Bend Mount

E1834G - Keysight Technologies

The E1834G is a 50% beam splitter in a high performance horizontal mount that offer the high pointing stability for Keysight laser interferometer measurement system. The 8 flexure feet are designed for stable beam pointing.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

50% Beam Splitter

10725A - Keysight Technologies

The 10725A 50% beam splitter, designed for beam diameters of 9 mm or less, divides the beam into equal parts. It transmits one part straight through, and bends the other part at a 90-degree angle. This optic is without housing and requires a user-supplied mount.

Product Home Contact/Sales Company Catalog Share Add To List

50% Beam Splitter

10701A - Keysight Technologies

The Keysight 10701A beam splitter is designed for beam diameters of 6 mm or less. It reflects one half of the total incoming laser beam, and transmits one half. The Keysight 10701A optic includes a housing for standard mounting.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

4% Beam Splitter

10725B - Keysight Technologies

The 10725B 4% beam splitter, designed for beam diameters of 9 mm or less, reflects 4% of the total incoming laser beam and transmits 96% straight through. This optic is without housing and requires a user-supplied mount.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

33% Beam Splitter - BK7, fixed horizontal-bend mount

E1834E - Keysight Technologies

The E1834E is a 33% beam splitter in a high performance horizontal mount that offer the high pointing stability for Keysight laser interferometer measurement system. The 8 flexure feet are designed for stable beam pointing.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

33% Beam Splitter

10700A - Keysight Technologies

The Keysight 10700A beam splitter is designed for beam diameters of 6 mm or less. It reflects one third of the total incoming laser beam, and transmits two thirds. It includes a housing for standard mounting.

Product Home Contact/Sales Company Catalog Share Add To List

15% Beam Splitter

10725C - Keysight Technologies

The 10725C 15% beam splitter, designed for beam diameters of 9 mm or less, reflects 15% of the total incoming laser beam and transmits 85% straight through. This optic is without housing and requires a user-supplied mount.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Retroreflector

10704A - Keysight Technologies

The Keysight 10704A retroreflector (cube corner) is a measurement reflector for single-beam measurements. It is paired with the Keysight 10705A single beam interferometer and is designed for making limited space, single-axis measurements. If mass is critical, the Keysight 10704A is available without housing as the Keysight 10713C, and for extremely critical mass requirements, the Keysight 10713D 1/4-inch base retroreflector can be used.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Beam Bender

Topics