Keysight Technologies
Keysight empowers innovators to explore, design, and bring world-changing technologies to life. As the industry’s premier global innovation partner, Keysight’s software-centric solutions serve engineers across the design and development environment, enabling them to deliver tomorrow’s breakthroughs at speed and with reduced risk. Keysight leverages its strength as the world’s leading test and measurement provider and today enables innovators to push the boundaries of engineering by quickly solving design, emulation, and test challenges to help create the best product experiences.
- 1 800 829-4444
- 1 800 829-4433
- usa_orders@keysight.com
- 1900 Garden of the Gods Road
Colorado Springs, CO 80907-3423
United States of America
-
Product
2X8 PXIe Switch Matrix, 300 KHz to 18 GHz
M9165C
Matrix Switch Module
M9165C 2X8 PXIe switch matrix, 300 KHz to 18 GHz is a full cross-bar switch matrix that provides a switch based multiport VNA solution.
-
Product
Noise Source Family
346 Series
-
This series of broadband noise sources has been designed to cover the majority of measurement applications with a range of frequencies, Excess Noise Ratio (ENR) and coaxial connector types.
-
Product
Impedance Analyzers
-
The E4990A Impedance Analyzer with a frequency range of 20 Hz to 120 MHz provides an industry best 0.045% (typ.) basic accuracy over a wide impedance range, with a 40 V built-in DC bias source.
-
Product
Flexible Cable, 3.5 Mm (Test Port) To 3.5 Mm
85131H
Calibration Cable
The Keysight 85131H is a 62.2 cm (24.5 in) long1 flexible cable with a 3.5 mm female2 to 3.5 mm male connector. Cable frequency range is dc to 26.5 GHz with a return loss greater than or equal to 16 dB. Insertion loss is 0.25 * sqrt (f) + 0.2 dB (where f is frequency is GHz) for the test port connector, and 1.5 dB at maximum frequency for the device connector. Phase stability of semi-rigid/flexible cables is characterized with a 90 degree bend using a 3 inch radius. Stability1 of the Keysight 85131H is less than 0.12 dB and phase is 0.13o * f + 0.5o, (where f is frequency in GHz).
-
Product
P-Series Wideband Power Sensors
-
The Keysight P-Series wideband power sensors provides peak, peak-to-average ratio, average power, rise time, fall time, maximum power, minimum power and statistical data of wideband signals.
-
Product
DC Power Supply, 60V, 0.6A, 36W
E36105B
DC Power Supply
The Keysight E36105B is an accurate, 60V, 0.6A, 36W compact power supply for your bench or system.
-
Product
Vector Network Analyzer (VNA) Simulator – Advanced
S94051B
Vector Network Analyzer
S94051B puts Keysight’s industry-leading network analyzer software portfolio into your computer. Dive deeper into data captured on an instrument with support for time domain, spectrum analysis, gain compression, and all the other software applications you use on your instrument. You can also develop and troubleshoot test programs on your computer before deploying them to the instrument. S94051B is a superset of S94050B and contains the S-parameter functionality.
-
Product
Waveform Generator, 20 MHz, 1 Channel
EDU33211A
Waveform Generator
The EDU33211A single channel function / arbitrary waveform generator brings uncompromising performance to an entry-level function generator.
-
Product
PXIe Precision Source/Measure Unit, 1.25 MSa/s, 10 fA, 210 V, 315 mA
M9601A
Source Measure Unit
M9601A PXIe precision SMU is the industry-first precision PXIe SMU enabling faster precise measurement from DC to 20 μs pulse up to 210 V/315 mA with the best-in-class 10 fA resolution and low noise.
-
Product
DC Power Supply, 0-120 V, 0-1.5 A, 180 W, GPIB
N6700
DC Power Supply
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
-
Product
USB Modular Oscilloscopes
U270xA
-
Roughly the size of a paperback book, these low-cost USB oscilloscopes make it easy to perform essential measurements — waveforms, voltage, current, resistance, and more. Inject standard or arbitrary waveforms into the systems or devices you’re testing with Keysight USB oscilloscopes.
-
Product
Terminal Block For 34952A And L4452A Multifunction
34952T
Terminal Block
The Keysight 34952T is a terminal block for the 34952A and L4452A Multifunction with 32-bit DIO, 2-ch D/A and Totalizer. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connections or 24 AWG for >100 connections. The 34952T is a detachable terminal block with screw-type connections that provides a flexible method for connecting external wiring.
-
Product
Optical Test Optimization Solutions and N1002A for 800G and 1.6T
FlexOTO
-
Optimize test efficiency and increase DCA-M hardware utilization for high channel count testing in 400G/800G/1.6T and CPO/NPO applications.
-
Product
10 MHz to 6 GHz USB Wide Dynamic Range Average Power Sensor
U2051XA
Power Sensor
The Keysight U2051XA is a fast, accurate and wide dynamic range 10 MHz – 6 GHz USB average power sensor.
-
Product
Vector And Scalar Mixer/Converter Measurements
S96083B
-
S96083A provides fully calibrated conversion gain/loss, relative phase, and absolute group delay measurements of mixers and converters without the need for reference or calibration mixers
Children
-
TDK RF Solutions Inc.
TDK RF Solutions Inc., belonging to TDK Corporation’s EMC & RF Engineering Business Division, was established in Cedar Park, Texas in 1987 and acquired by TDK in 1998. TDK RF Solutions is a world leader in the design, development, and manufacture of technical solutions for the electromagnetic compatibility testing and antenna measurement industries. We offer a complete range of solutions including automated test systems, TDK anechoic chambers, RF absorbers, antennas, software, and a wide range of test products.
Children
-
Children
-
Keysight Network Applications and Security
A leading provider of performance test systems for IP-based infrastructure and services. Ixia's test systems are used by Network and Telephony Equipment Manufacturers, Semiconductor Manufacturers, Service Providers, Governments, and Enterprises to validate the functionality and reliability of complex IP networks, devices, and applications. Ixia's Triple Play test systems address the growing need to test voice, video, and data services and network capability under real-world conditions.
Children
-
PRISMA Telecom Testing Srl
Since 1986, PRISMA Engineering leads multi-user, scalable load&stress test and monitoring solutions for mobile networks. The largest wireless network equipment Manufacturers and Service Providers worldwide depend on complete testing solutions that PRISMA provides and maintains. Our engineering team provides extensive experience in all areas of hardware and software design, with telecommunication expertise ranging from GSM/GPRS/EDGE, UMTS and WiMAX standards, to LTE and more. Recently added testing solutions based on Software Defined Radio have expanded the scope of PRISMA’s solutions to the entire range of interfaces used in mobile networks, especially for Evolved EDGE and LTE radio systems.
Children
-
eggPlant
Here at eggplant, our focus is to provide test automation tools to satisfy every testing need. To this end, we have created the eggPlant range. The eggPlant range of tools can handle all kinds of testing, from functional to performance and load testing, and even network emulation.
Children
-
AnaPico Ltd
Leading supplier of microwave key components and equipment for high-speed test and measurement applications. The company's core competences comprise design, fabrication and testing of RF and microwave electronic components and instruments.
Children
-
ESI Group
ESI Group, a part of Keysight Technologies, provides reliable and customized solutions anchored on predictive physics modeling and virtual prototyping expertise. Acting principally in automotive, land transportation, aerospace and defense, and heavy industry,
Children
-
Ansys Corporation
Ansys software has enabled innovators across industries to push boundaries with the predictive power of simulation. From sustainable transportation and advanced semiconductors, to satellite systems and life-saving medical devices, the next great leaps in human advancement will be powered by Ansys.
Children
-
Spirent Communications plc
Designs, manufactures, and markets state-of-the-art telecommunications test systems.
Children
-
ITI
As an internationally leading company we offer standard simulation tools for engineers and scientists. Apart from this, we carry out consulting, engineering as well as programming services. The software SimulationX has been applied by the best engineers and scientists of more than 700 important industry companies world-wide.
Related
-
VPC
Virginia Panel Corporation (VPC) provides VPC provides Interconnect Solutions that enable simultaneous connection of multiple test and measurement signal types through one modular interface. Designed to accommodate signal, power, RF, thermocouple, pneumatic/vacuum, and fiber optic connector modules in multiple configurations, VPC’s innovative products meet the demands of test & measurement interconnect requirements.
-
Amplicon USA
Amplicon provide the marketplace with a wide range of advanced computer-based measurement and automation systems that can be customised, networked and bundled for easy integration, backed by a technically competent workforce with a highly developed engineering capability and a state of the art EMC test facility.
-
The Test Connection, Inc.
TTCI has been leading the way in electronic test engineering since 1980. As the oldest test engineering company in the electronics industry, our test engineers can be relied upon for flying probe, in-circuit, boundary scan, and functional test solutions. We are a US veteran-owned-and-operated company and an ITAR-registered test development and board testing center with over 100 years of combined test engineering experience. At TTCI, we maximize coverage using the latest technology and provide complete documentation to allow our team to support needs from the earliest design stages to test development to the testing of your product.
