Keysight Technologies
From early design exploration to large-scale production, Keysight helps engineers prove performance, validate reliability, and accelerate breakthrough technologies to market.
- 1 800 829-4444
- 1 800 829-4433
- usa_orders@keysight.com
- 1900 Garden of the Gods Road
Colorado Springs, CO 80907-3423
United States of America
-
Product
Infiniium EXR-Series Real-Time Oscilloscopes
EXR-Series
-
Up to 2.5 GHz on all 8 channels, 7 instruments integrated in one oscilloscope, hardware accelerated plotting, and fully upgradeable.
-
Product
Spectrum Analysis, Up To 50 GHz
S930905B
-
The S930905B spectrum analysis adds high-performance microwave spectrum analysis to the N522xB/N523xB/N524xB PNA network analyzer family up to 50 GHz.
-
Product
Noise Figure Measurements With Vector Correction
S95029B
-
The S95029B noise figure application enables high-accuracy noise figure and noise-power measurements of amplifiers, frequency converters, and mixers by using the Keysight vector-source-correction technique. Using a source-impedance tuner to remove the effects of imperfect system-source match, this technique produces higher accuracy results than Y-factor method and other cold-source implementations--especially for in-fixture, on-wafer, and automated-test environments.
-
Product
USB Modular Data Acquisition
-
The Keysight USB data acquisition (DAQ) family gives you the choice and flexibility to create solutions that evolve and expand according to your changing measurement needs. You can acquire, measure, and analyze data from electrical, mechanical, physical, and acoustical phenomena.
-
Product
Open Termination, 4-Terminal Pair
42090A
Terminator
The 42090A is an open termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using this standard.
-
Product
USB Modular Source Measure Unit
U2723A
Source Measure Unit
The 3-channel 20V/120mA module can operate in a 4-quadrant operation. The channels could be connected in series or in parallel to achieve up to 60 V/360 mA. It uses the common non-proprietary standard high-speed USB 2.0 interface that provides ease of connectivity allowing users to set up and configure their tests swiftly with its plug and play feature.
-
Product
Optical Receiver Stress Test Solution
N4917B
-
The N4917B software provides an automated standard compliant stressed receiver sensitivity test according to 100GBASE-LR4, ER4 and SR4 test specification. In order to do this kind of test, several test instruments such as a bit error ratio tester, digital sampling oscilloscope, optical reference transmitter and tunable laser source are required to operate together to achieve a compliant, repeatable optical stressed eye. This stressed eye is then fed to the receiver under test, where bit error ratio is measured under the stress conditions as defined in the standard.
-
Product
Parallel Electrode SMD Test Fixture, DC To 3 GHz
16196C
Test Fixture
The 16196C surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.
-
Product
Rack Mount Kit for RP7900 Regenerative Power System
RP7909A
Mounting Kit
The RP7909A rack mount kit makes it easy to integrate a RP7900 Series regenerative power system into a 19-inch EIA rack cabinet. This rack mount kit includes slide rails, and flange mounts (without ears).
-
Product
Handheld Insulation Resistance Testers
U1450A/60A Series
-
The U1450A and U1460A series insulation resistance testers are ideal for predictive and preventive maintenance measurement tasks in electrical and industrial applications. With their vast measurement capabilities, efficient automated report generation and high durability, you can accomplish more in a day’s work with the Keysight U1450A and U1460A series insulation resistance testers.
-
Product
Millimeter-wave Test Set Controller For PNA/PNA-X Network Analyzer Series, 2- Or 4-port
N5292A
Controller
The N5292A millimeter-wave controller provides 2- or 4- port interface capability to the millimeter-wave frequency extender modules and with a PNA or PNA-X Series B model network analyzers.
-
Product
Basic AC Power Source, 4000 VA, 310 V, 20 A
AC6804B
Power Supply
This basic AC power source offers stable, reliable power up to 4000 VA. An intuitive user interface and flexible I/O connectivity.Increase your uptime with stable, reliable AC power sourceEngineer reliability into your designs with a basic AC power sourceTest your designs with confidenceTest under real-world conditions - fluctuating voltage or transient spikesEasily access setup and measurement information
-
Product
Input Terminal Block For Digital Multimeters
34171B
Terminal Block
The Keysight 34171B DMM input terminal connector block is a set of two connectors which provide a convenient and reliable method to connect wires to all five input terminals. Terminals are made of low-thermal copper alloys to minimize thermally-induced voltages caused by dissimilar metals. For minimum thermal offset voltages, use unplated copper wire of the same gauge for all connections.
-
Product
Materials Measurement Suite
N1500A
-
With Keysight N1500A materials measurement software suite, you can determine the intrinsic electromagnetic properties of many dielectric and magnetic materials. The complete system is based on a versatile Keysight network analyzer which measures the material’s response to RF or microwave energy. The N1500A software controls the network analyzer and calculates results. Depending on the Keysight network analyzer and sample holder or fixture used, frequencies can extend from a few hundred MHz into the low THz.
-
Product
34945A Distribution Board, With Generic Screw Terminals For Driving 16 Switch Coils
Y1155A
Distribution Board
The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.
Children
-
TDK RF Solutions Inc.
TDK RF Solutions Inc., belonging to TDK Corporation’s EMC & RF Engineering Business Division, was established in Cedar Park, Texas in 1987 and acquired by TDK in 1998. TDK RF Solutions is a world leader in the design, development, and manufacture of technical solutions for the electromagnetic compatibility testing and antenna measurement industries. We offer a complete range of solutions including automated test systems, TDK anechoic chambers, RF absorbers, antennas, software, and a wide range of test products.
Children
-
Children
-
Keysight Network Applications and Security
A leading provider of performance test systems for IP-based infrastructure and services. Ixia's test systems are used by Network and Telephony Equipment Manufacturers, Semiconductor Manufacturers, Service Providers, Governments, and Enterprises to validate the functionality and reliability of complex IP networks, devices, and applications. Ixia's Triple Play test systems address the growing need to test voice, video, and data services and network capability under real-world conditions.
Children
-
PRISMA Telecom Testing Srl
Since 1986, PRISMA Engineering leads multi-user, scalable load&stress test and monitoring solutions for mobile networks. The largest wireless network equipment Manufacturers and Service Providers worldwide depend on complete testing solutions that PRISMA provides and maintains. Our engineering team provides extensive experience in all areas of hardware and software design, with telecommunication expertise ranging from GSM/GPRS/EDGE, UMTS and WiMAX standards, to LTE and more. Recently added testing solutions based on Software Defined Radio have expanded the scope of PRISMA’s solutions to the entire range of interfaces used in mobile networks, especially for Evolved EDGE and LTE radio systems.
Children
-
eggPlant
Here at eggplant, our focus is to provide test automation tools to satisfy every testing need. To this end, we have created the eggPlant range. The eggPlant range of tools can handle all kinds of testing, from functional to performance and load testing, and even network emulation.
Children
-
AnaPico Ltd
Leading supplier of microwave key components and equipment for high-speed test and measurement applications. The company's core competences comprise design, fabrication and testing of RF and microwave electronic components and instruments.
Children
-
ESI Group
ESI Group, a part of Keysight Technologies, provides reliable and customized solutions anchored on predictive physics modeling and virtual prototyping expertise. Acting principally in automotive, land transportation, aerospace and defense, and heavy industry,
Children
-
Ansys Corporation
Ansys software has enabled innovators across industries to push boundaries with the predictive power of simulation. From sustainable transportation and advanced semiconductors, to satellite systems and life-saving medical devices, the next great leaps in human advancement will be powered by Ansys.
Children
-
Spirent Communications plc
Designs, manufactures, and markets state-of-the-art telecommunications test systems.
Children
-
ITI
As an internationally leading company we offer standard simulation tools for engineers and scientists. Apart from this, we carry out consulting, engineering as well as programming services. The software SimulationX has been applied by the best engineers and scientists of more than 700 important industry companies world-wide.
Related
-
VPC
Virginia Panel Corporation (VPC) provides VPC provides Interconnect Solutions that enable simultaneous connection of multiple test and measurement signal types through one modular interface. Designed to accommodate signal, power, RF, thermocouple, pneumatic/vacuum, and fiber optic connector modules in multiple configurations, VPC’s innovative products meet the demands of test & measurement interconnect requirements.
-
Amplicon USA
Amplicon provide the marketplace with a wide range of advanced computer-based measurement and automation systems that can be customised, networked and bundled for easy integration, backed by a technically competent workforce with a highly developed engineering capability and a state of the art EMC test facility.
-
The Test Connection, Inc.
TTCI has been leading the way in electronic test engineering since 1980. As the oldest test engineering company in the electronics industry, our test engineers can be relied upon for flying probe, in-circuit, boundary scan, and functional test solutions. We are a US veteran-owned-and-operated company and an ITAR-registered test development and board testing center with over 100 years of combined test engineering experience. At TTCI, we maximize coverage using the latest technology and provide complete documentation to allow our team to support needs from the earliest design stages to test development to the testing of your product.
