Showing results: 1 - 15 of 16 items found.
-
BKM91D -
Techna-Tool Inc.
BK MIKRO BKM91, BKM91D, BKM91PN and BKM92KIO controllers utilize the premium version of firmware which allows for multiple tools or functions to be programmed. These controllers are typically used when advanced features are required such as checking for broken tool inside of a CNC tool changer or checking multiple object or free space positions.
-
BKM93KIO -
Techna-Tool Inc.
Clockwise and/or counter-clockwise rotation of the wand is programmable allowing an optimum adaptation to the machine.The scanning intensity is adjustable in 8 steps. Even rotating drills with small diameters can be checked.The scanning results are display as "OK" or "KO" and signalled by LEDs on the front side of the device.The PROFIBUS is a standard Sub-D 9 pin connection; the USB connection is a USB-mini plug / type B and meets the 2.0 specification.Three digital inputs serve to activate the functions "Teach-in" to learn the position to be scanned, "Start" to initialize the scanning process and "Configurable" for receiving a stop command.Two digital outputs provide the signals for the message "OK" or "KO".The relay contacts are configurable as N/C or N/O connections. They can be set as momentary (valid with start or timed) or latching.Convenient configuration software for programming and setting of tool data is available at no cost.
-
Techna-Tool Inc.
All BK Mikro controllers utilize the latest technology for the most flexibility and programming options. The compact, din rail mounted control unit mounts easily in the electrical cabinet and provides a full line of advanced functions.
-
Techna-Tool Inc.
All BK Mikro scanners utilize servo motors for accurate measurements and increased lifetime.
-
TK7A /TK7RL -
Techna-Tool Inc.
The two scanner variations of the type TK7 have identical features. The only difference is that in variation “A” the rotational movement is limited by a mechanical stop inside the housing while the scanner “RL” can rotate in both directions without stopping. This is for checking two tools. These scanners are best suited for tight spaces where a larger scanner may not fit, such as Swiss style machines or multi-spindle heads.
-
TK94A/TK94RL -
Techna-Tool Inc.
The two scanner variations of the type TK94 have similar features. The difference is that variation "A" is used for checking single positions or free space while the version "RL" rotates in both directions without stopping to check for two tools. These scanners are best suited for harsh environments and have a built-in air purge with a strong/fast motor. This scanner would be used in applications that previously used the BK Mikro model 4 or 5 scanners such as lathes, transfer machines or in the work envelope of machining centers.
-
TK9LIN50 -
Techna-Tool Inc.
BK Mikro Linear is based on the existing design concepts for tool, object and free space monitoring and is modified to utilize a rack and pinion probe instead of a wand. This system monitors a specific distance or depth with longitudinal scanning. This is especially useful in cases where rotary scanning is inappropriateorimpossible. Some examples would be cavities, blind or through holes and places where space is limited. It can also be used to verify a part is in place during assembly or that the proper part is on the machine by probing a specific feature.
-
BK MIKRO -
Techna-Tool Inc.
BK Mikro is typically used as a broken tool detection system but can also be used for many other applications such as object inspection, position recognition and checking for part defects. The selection of the scanner and controller for broken tool detection systems is mainly application based. Follow the links below to explore specific models or contact us with application questions about our broken tool detection systems.
-
BKM91 -
Techna-Tool Inc.
Clockwise and/or counter-clockwise rotation of the wand is programmable allowing an optimum adaptation to the machine.The scanning intensity is adjustable in 8 steps. Even rotating drills with small diameters can be checked.The scanning results are display as "OK" or "KO" and signaled by LEDs on the front side of the device.The PROFIBUS is a standard Sub-D 9 pin connection; the USB connection is a USB-mini plug / type B and meets the 2.0 specification.Three digital inputs serve to activate the functions "Teach-in" to learn the position to be scanned, "Start" to initialize the scanning process and "Configurable" for receiving a stop command.Two digital outputs provide the signals for the message "OK" or "KO".The relay contacts are configurable as N/C or N/O connections. They can be set as momentary (valid with start or timed) or latching.Convenient configuration software for programming and setting of tool data is available at no cost.Mini USB for PC connection3 digital control inputs (positive or negative logic) Start and teach signal One configurable input2 relay outputs selectable as N/C or N/O contact Signal all clear message ("OK") Signal error message ("KO") Scanner connection4 LEDs for status display Opening for top hat plug for optional connection to I/O extension module Din rail mounting
-
BKM91PN -
Techna-Tool Inc.
Clockwise and/or counter-clockwise rotation of the wand is programmable allowing an optimum adaptation to the machine.The scanning intensity is adjustable in 8 steps. Even rotating drills with small diameters can be checked.The scanning results are display as "OK" or "KO" and signaled by LEDs on the front side of the device.The PROFIBUS is a standard Sub-D 9 pin connection; the USB connection is a USB-mini plug / type B and meets the 2.0 specification.Three digital inputs serve to activate the functions "Teach-in" to learn the position to be scanned, "Start" to initialize the scanning process and "Configurable" for receiving a stop command.Two digital outputs provide the signals for the message "OK" or "KO".The relay contacts are configurable as N/C or N/O connections. They can be set as momentary (valid with start or timed) or latching.Convenient configuration software for programming and setting of tool data is available at no cost.Mini USB for PC connection3 digital control inputs (positive or negative logic) Start and teach signal One configurable input2 relay outputs selectable as N/C or N/O contact Signal all clear message ("OK") Signal error message ("KO") Scanner connection4 LEDs for status display Opening for top hat plug for optional connection to I/O extension module Din rail mounting
-
TK96A/TK96RL -
Techna-Tool Inc.
The TK96 series scanner is the most compact in the BK Mikro line and comes with a durable stainless steel bodywhich helps resist wear from chips and other flying debris. With a diameter of only 12mm it is ideal for tight spaces where other scanners may not fit such as in Swiss style machines or multi-spindle heads. Because of its small size it provides less area for chips and other debris to collect. Two scanner variations, “A” and “RL”, are available for either checking one or two tools.
-
BK MIKRO BKM93/BKM93KIO -
Techna-Tool Inc.
BK MIKRO BKM93/BKM93KIO Basic controller has more limited functions than the premium version controllers. This controller only monitors object or free space applications for 1 tool in a single direction or 2 tools being checked bi-directionally (right/left). This controller would be used for applications that in the past used the BK4 or BK5 type controllers.
-
Techna-Check PM-1 -
Techna-Tool Inc.
The Techna-Check® model PM-1 is a production monitoring system which is easily mounted in your machine's electrical cabinet. The PM-1 is one of the most comprehensive production monitoring systems available today. The PM-1 monitors the production from any machine on your shop floor and reports back the machine's production through Ethernet to our custom software, also viewable via a webpage.
-
TK91A -
Techna-Tool Inc.
BK Mikro TK91A is a scanner designed mainly for broken tool detection inside the tool changer of machining centers adding little or no additional cycle time. The controller stores up to 512 different tool lengths in memory and is controlled using M-Code combinations, a custom Macro or Profibus. The system can check tools whose lengths vary as much as 22 inches from the shortest to longest in the changer. Each of the 512 different tools can have individual tolerance ranges set varying between 0.05 and 25.4 degrees. This equates to as little as a 0.38mm difference in tool length variation that can be detected using a 500mm long wand.
-
Techna-Check -
Techna-Tool Inc.
The TECHNA-CHECK® Tool Monitoring Systems have been developed to monitor for broken, worn and missing tools through spindle power monitoring or vibration analysis. Various models are available depending on the specific application requirements
