Abaco Systems Inc
With more than 30 years of experience, Abaco Systems is the global leader in open architecture rugged embedded systems. We deliver market-leading commercial off-the-shelf and custom products, together with best in class program lifecycle management. This, together with our 800+ professionals’ unwavering focus on our customers’ success, reduces program cost and risk, allows technology insertion with affordable readiness and enables platforms to successfully reach deployment sooner and with a lower total cost of ownership. With an active presence in hundreds of national asset platforms on land, sea and in the air, Abaco Systems is trusted where it matters most.
- 1-866-652-2226
- 8800 Redstone Gateway
SW, Ste 200
Huntsville, AL 35808
United States of America
-
Product
Mezzanine System Carrier
MMS8010 / MMS8011
System
The Abaco ECM 3U VPX carrier supports up to six Abaco Systems Electrical Conversion Modules (ECMs) in a VITA 46 VPX form factor. Each ECM site connects 32 single-ended 3.3 V signals to the FPGA. The specific ECM board installed on a site converts the FPGA signals to 16 I/O signals, for a total of 96 I/O signals across the six ECM sites.
-
Product
Transceiver Module
ICS-1572A
-
The ICS-1572A is equipped with a Xilinx Virtex-6 LX240T that can be loaded with standard functions such as wideband DDC, FFT and time stamping - or programmed by the user for any required function.
-
Product
72" Cable
RCONSCSI3-6
-
72” cable (with twisted pairs) transitions from the card front I/O connector on the RAR-USB, RAR-XMC, RAR-PCIE, RCEI-530, RCEI-830A, CEI-520/520A, R830RX, MAC2-VXI, RMAC-VME, P-DIS or P-SER to a SCSI-3 connector. This cable is for the RAR-PCIE, RCEI-530, and CEI-520/520A products, where the rear Discrete I/O connector utilizes the CONM50-D37 or other IDC-50 ribbon connector.
-
Product
Digital I/O
IP-DIGITAL482
Digital I/O
IP-DIGITAL482 is a single-wide IndustryPack configured to maximize the number of digital I/O lines. The 48 lines are accessible as individual bits or as bytes. These lines may also be used for 8-bit and 16-bit I/O with handshake lines. IP-DIGITAL482 is a drop-in replacement for the IP-DIGITAL-48.
-
Product
3U VPX Virtual Secure Router
VSR347D
-
The VSR347D takes advantage of Abaco’s SBC347D hardware with an optimized environment running Juniper Networks’ vSRX Virtual Firewall, providing high levels of network security and performance in a single 3U VPX slot.
-
Product
3U VPX Graphics Output Board
GR2
-
The Abaco GR2 is a 3U VPX graphics output card based on NVIDIA® Pascal™ Quadro® P5000/P3000 GPUs. The GR2 offers very high performance graphics and GPGPU capability – up to 6.4 TFLOPS floating-point - with CUDA™ and OpenCL™ support.
-
Product
Mezzanine System Carrier
MMS6245
System
The MMS6245 gives you the ultimate flexibility in rugged embedded I/O by allowing you to customize the 64 user-configurable front panel signals with our patented Electrical Conversion Module (ECM) technology. This configurable XMC carrier can host up to four ECMs giving you the ability to customize I/O to your specific needs.
-
Product
Digital I/O Board
3512
Digital I/O
The 3512 is an eight channel non-isolated digital I/O board with +5V tolerant 74LCX14 inputs with hysteresis and +3.3V CMOS 74LVTH125 driven outputs. Each I/O line features a series 10 ohm damping and protection resistor and a 4.7K pull up resistor to +3.3V. On power up the outputs are tri-stated, and can then be enabled on a bit by bit basis. Output high drive is 32mA @ 2.0V minimum. Output low drive is 32mA @ 0.8V maximum.
-
Product
Computing VITA System
CRS 48.5
System
The CRS 48.5 is a complete, integrated, pre-tested, ready-to-run HPEC rugged subsystem enabling faster development/deployment at lower cost and risk using the most advanced VITA 48.5 compliant air-flowthrough cooling to allow the integration of up to eight quad core Intel® Core™ i7 processing nodes.
-
Product
FPGA Mezzanine Card
FMC126
-
The FMC126 is a quad-channel multi-mode A/D FMC, fully compliant with VITA 57.1 standards.The card provides four 10-bit ADC channels that enable simultaneous sampling of 4, 2, or 1 channel with a maximum sample rate of 1.25 GSPS (4-channel mode), 2.5 GSPS (2-channel mode), or 5.0 GSPS (1-channel mode).
-
Product
VPX Computer
CRS-D5I-3VC1
-
Abaco Systems CRS-D5I-3VC1 Rugged COTS System is a packaged pre-validated 5-slot video processing, display and control computer system fully integrated and ready to be deployed as soon as your application is ready.
-
Product
FPGA DSP Board Support Package
-
Our Board Support Package helps customers get their hardware implementation underway as quickly as possible by providing reference designs, the Stellar IP FPGA development tool, and the 4FM GUI user interface for controlling and monitoring the hardware, as well as other supporting elements. The package comes with three main components: host tools, FPGA tools and diagnostic tools.
-
Product
8" Cables
RCONP1553-1
-
Transitions from each card end (non-IRIG) connector on various boards into two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and two 8" cables with BNC cable jacks for I/O triggers.
-
Product
Analog-to-Digital Converter Board
VME-3125A
Converter Board
Isolated Scanning 12-bit 32-Channel Analog-to-Digital Converter Board (6U) with Built-in-Test (BIT)
-
Product
FPGA Mezzanine Card
FMC165
-
The FMC165 provides two 14-bit analog-to-digital (A/D) channels supporting RF sampling at 2.6 GSPS and one 14-bit digital-to-analog (D/A) channel with sampling rates up to 5.2 GSPS (2.6 GSPS direct RF synthesis). The converters are clocked by either an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition, a trigger input for customized sampling control is available to users.
Parent
-
AMETEK Inc.
AMETEK is a global leader in electronic instruments and electromechanical devices. AMETEK consists of two operating groups: Electronic Instruments - a leader in the design and manufacture of advanced instruments for the aerospace, power, process and industrial markets. Electromechanical - a differentiated supplier of electrical interconnects, precision motion control solutions, specialty metals, thermal management systems, and floor care and specialty motors.
Siblings
-
Ametek Compliance Test Solutions
AMETEK-CTS is a global leader in EMC compliance testing and RF power amplifiers. AMETEK has been designing and manufacturing precision instruments for more than 50 years. Under the brand names of EM TEST, Teseq, IFI and Milmega the company produce a wide range of specialist solutions aligned to the individual needs of equipment manufacturers across a variety of industries.
Siblings
-
MOCON, Inc.
AMETEK MOCON is the global leader in the design, development, manufacture, and support of gas measurement and control instruments and services
Siblings
-
AMETEK Measurement & Calibration Technologies Division
Measurement & Calibration Technologies provides calibration instruments for temperature, pressure and process control. It also is a leader in level measurement devices, continuous position sensors, hardness testers, force measurement devices and retractable cord reels. In addition, it offers a line of weathering test instrumentation along with laboratory and outdoor testing services.
Siblings
-
Ametek Materials Analysis Division
The AMETEK Materials Analysis Division´s goal is to be the recognized market leading provider of world-class analytical systems, nuclear instrumentation and digital imaging solutions.
Siblings
-
Process & Analytical Instruments division of AMETEK
Process & Analytical Instruments is a leader in analyzers, monitors and other instruments used by oil, gas, chemical/petrochemical, pharmaceutical, semiconductor, factory automation and other process industries. In addition, it offers a wide range of oil field and laboratory testing instruments, infrared temperature measurement devices, subsea and ultra-deep water fluid and flow measurement equipment, and specialized sampling, extraction, transport and conditioning systems.
Siblings
-
Ultra Precision Technologies Division of Ametek
Ultra Precision Technologies is a leader in the development of ultra precise measurement devices and precision machining systems. It also is a leader in ophthalmic instruments and eye care diagnostic devices, optical lens manufacturing equipment, vibration cancellation systems and enclosures, and advanced scanners used in reverse engineering, quality assurance and 3D printing.
Siblings
-
AMETEK Programmable Power, Inc.
Located in San Diego, CA, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
Siblings
-
Ametek Power Instruments
AMETEK Power Instruments serves the world-wide electric power generation and distribution industries with our advanced instruments and monitoring systems. We offer an extensive sales and service network around the globe including the US, UK and Asia. We can provide fault recorders, power line carriers, high accuracy revenue meters, alarm management and much more for your power generation, transmission and distribution needs. Our engineers have decades of design experience and work with each client to meet their stringent requirements. AMETEK Power Instruments has over 50 years of experience partnering with leading Fortune 500 companies.
Siblings
-
AMETEK Thermal Process Management
Thermal Process Management (TPM) is a Business Unit in the Process Analytical and Instrumentation Division of AMETEK. TPM is comprised of 5 companies with unique and distinguished product solutions, leading share in their respective market space, and operating with considerable market synergies. TPM manufactures industry leading thermal management systems, winterization solutions for instrumentation, and process extraction, transport, and conditioning systems.
Siblings
-
Barben Analytical
AMETEK® Barben Analytical is a market-leading supplier of analytical measurement solutions for the process industries. We design, manufacture, and sell a broad range of industrially hardened instruments, including pH and ORP electrochemical sensors, as well as gas and liquid phase optical oxygen analyzers.
Siblings
-
Ametek Spectro Scientific
Spectro Scientific, an ISO 9001:2008 company, specializes in analytical tools and software for machine condition monitoring. The company is one of the largest suppliers of oil and fuel analysis instruments to industry and the military worldwide. Industry clients include petrochemical, mining, marine and power generation companies as well as commercial testing laboratories. Spectro Scientific’s extensive product offerings include spectrometers for wear metal analysis, lubricant degradation and contamination analyzers, particle analysis instruments and complete turnkey systems for oil or fuel analysis laboratories, all managed by its SpectroTrack software platform.
Siblings
-
Haydon Kerk Pittman
Haydon, Kerk and Pittman are three world class AMETEK brands that supply advanced linear and rotary motion solutions to a diverse mix of global customers. We are recognized as a leading manufacturer of brushed and brushless DC motors, stepper motor based linear actuators, precision Acme lead screw and anti-backlash nut assemblies, linear rail and guide systems, gearmotors, drives and complete custom automation sub-systems.
Siblings
-
NSI-MI Technologies
NSI-MI Technologies is the leading global supplier of antenna, RF, and microwave testing equipment. With a team of highly respected technical experts, we are committed to providing top-notch engineering solutions and advanced products for a wide range of industries that require precise measurement, motion control, and data acquisition.
Siblings
-
United Electronic Industries, Inc.
Produces data acquisition hardware, signal conditioning and support software as needed in today's sophisticated, demanding test environments...
Siblings
-
RTDS Technologies
Being the first of its kind, the RTDS® Simulator is the world’s benchmark for performing real time power system simulation. With satisfied customers in 42 countries across the globe and over 1400 units in operation, RTDS Technologies is the undisputed world leader in our craft. We introduced the world’s very first fully digital real time power system simulator in 1989. RTDS Technologies continues to lead the way with our world-class, in-house research and development department. Our company is committed to innovation. We are continually developing our hardware, software, and support services in response to the needs of our customers.
