Abaco Systems Inc
With more than 30 years of experience, Abaco Systems is the global leader in open architecture rugged embedded systems. We deliver market-leading commercial off-the-shelf and custom products, together with best in class program lifecycle management. This, together with our 800+ professionals’ unwavering focus on our customers’ success, reduces program cost and risk, allows technology insertion with affordable readiness and enables platforms to successfully reach deployment sooner and with a lower total cost of ownership. With an active presence in hundreds of national asset platforms on land, sea and in the air, Abaco Systems is trusted where it matters most.
- 1-866-652-2226
- 8800 Redstone Gateway
SW, Ste 200
Huntsville, AL 35808
United States of America
-
Product
NETernity
SWE540A
-
Featuring the latest version of Abaco's OpenWare management suite, the SWE540A delivers fully managed Layer 3 routing and capabilities like Data Center Bridging, dynamic routing and traffic prioritization. It uniquely delivers the intelligence needed for the most complex networks.
-
Product
Digital Signal Processing (DSP)
-
Abaco has an extensive track record in helping our customers turn sensor-acquired data into actionable information in the shortest time and at the lowest bandwidth in a broad range of digital and analog applications.
-
Product
Analog I/O Board
VME-3128A
-
The VME-3128A scans 16, 32, 48 or 64 channels, continually digitizes all of them and stores the results. Choose from 64 differential or single-ended inputs and program VMEbus interrupts and interval timer to meet the unique requirements of your mission.
-
Product
Interface
RAR-USB
-
The RAR-USB is further evidence of Abaco Systems’ commitment to making available avionics solutions that are powerful and flexible, and that respond to the needs of customers.
-
Product
Digital I/O Board
3512
-
The 3512 is an eight channel non-isolated digital I/O board with +5V tolerant 74LCX14 inputs with hysteresis and +3.3V CMOS 74LVTH125 driven outputs. Each I/O line features a series 10 ohm damping and protection resistor and a 4.7K pull up resistor to +3.3V. On power up the outputs are tri-stated, and can then be enabled on a bit by bit basis. Output high drive is 32mA @ 2.0V minimum. Output low drive is 32mA @ 0.8V maximum.
-
-
Product
16-Port Serial Controller
PMC523
-
The PMC523 provides a flexible solution for technology insertion by integrating multiple serial I/O channels onto a single board computer (SBC) with a PCI Mezzanine Card (PMC) site. This gives customers affordable protection from obsolescence and a smart evolutionary path to enhanced software ultimately improves performance and increases efficiency.
-
Product
Analog and Other I/O
-
Our I/O portfolio covers everything from simple discrete to high speed analog control and delivers flexibility, performance, reliability and connectivity.
-
Product
Mezzanine System
5041
-
ECM P/N 5041 provides eight channels of RS485 / RS422 I/O with fixed 120 ohm termination for each channel. Speeds are up to 30M bits per second. All channels power up as inputs. Also transceiver inputs are always enabled for loop back diagnostic use when the outputs are enabled. Software can enable outputs on a channel by channel basis.
-
Product
Bus Monitor/Differential Scope Output
BT3-USB-MON
-
The BT3-USB-MON is like a Swiss Army Knife for MIL-STD-1553 users making it a must have, easy to use lab tool for anyone developing, troubleshooting, or maintaining a system that uses MIL-STD-1553. The monitor only bundle combines three tools into one easy to use product: 1553 visualization and recording with user friendly GUI BusTools-1553-BM; 1553 monitoring hardware; and an integrated differential scope output for electrical analysis - all available at an accessible price point.
-
Product
Mezzanine System
5147
-
ECM P/N 5147 provides two channels of 12 bit A/D conversion using the Analog Devices AD9235, and is suitable for medium resolution high speed applications. The two differential inputs are terminated in 120 ohms and buffered with a gain of 1 differential amplifier. Differential Input range is +/-3.0V. Sample rates are 20MHz per channel with a 5MHz 4 pole elliptical analog input filter.
-
Product
Interface
CEI-430/RCEI-430A
-
Designed for embedded and development applications, the CEI-430 and RCEI-430A support maximum data throughput on all channels while providing onboard message scheduling, label filtering, multiple buffering options, receive message time-tagging and error detection, and IRIG-B receiver (AM or DC/TTL) and generator (DC/TTL).
-
Product
Mezzanine System
3556
-
The 3556 provides two removable Micro SD flash memory sites, and fourteen bits of general purpose digital I/O. The Micro SD sites are each capable of Gigabytes of storage. A retention mechanism holds the Micro SD card securely in place preventing movement due to vibration or shock.
-
Product
Interface
RXMC2-1553
-
Abaco Systems ’ RXMC2-1553 is the latest generation of performance and flexibility for MIL-STD-1553A/B Notice II on a XMC.0 Mezzanine Card. The 4 channel RXMC2-1553 includes advanced API (Application Programming Interface) software that reduces application development time.
-
Product
Automatic Video Tracker
ADEPT105
-
Full-featured CompactPCI video tracker detects multiple targets and tracks multiple objects over land, sea and air.
Parent
-
AMETEK Inc.
AMETEK is a global leader in electronic instruments and electromechanical devices. AMETEK consists of two operating groups: Electronic Instruments - a leader in the design and manufacture of advanced instruments for the aerospace, power, process and industrial markets. Electromechanical - a differentiated supplier of electrical interconnects, precision motion control solutions, specialty metals, thermal management systems, and floor care and specialty motors.
Siblings
-
Ametek Compliance Test Solutions
AMETEK-CTS is a global leader in EMC compliance testing and RF power amplifiers. AMETEK has been designing and manufacturing precision instruments for more than 50 years. Under the brand names of EM TEST, Teseq, IFI and Milmega the company produce a wide range of specialist solutions aligned to the individual needs of equipment manufacturers across a variety of industries.
Siblings
-
MOCON, Inc.
AMETEK MOCON is the global leader in the design, development, manufacture, and support of gas measurement and control instruments and services
Siblings
-
AMETEK Measurement & Calibration Technologies Division
Measurement & Calibration Technologies provides calibration instruments for temperature, pressure and process control. It also is a leader in level measurement devices, continuous position sensors, hardness testers, force measurement devices and retractable cord reels. In addition, it offers a line of weathering test instrumentation along with laboratory and outdoor testing services.
Siblings
-
Ametek Materials Analysis Division
The AMETEK Materials Analysis Division´s goal is to be the recognized market leading provider of world-class analytical systems, nuclear instrumentation and digital imaging solutions.
Siblings
-
Process & Analytical Instruments division of AMETEK
Process & Analytical Instruments is a leader in analyzers, monitors and other instruments used by oil, gas, chemical/petrochemical, pharmaceutical, semiconductor, factory automation and other process industries. In addition, it offers a wide range of oil field and laboratory testing instruments, infrared temperature measurement devices, subsea and ultra-deep water fluid and flow measurement equipment, and specialized sampling, extraction, transport and conditioning systems.
Siblings
-
Ultra Precision Technologies Division of Ametek
Ultra Precision Technologies is a leader in the development of ultra precise measurement devices and precision machining systems. It also is a leader in ophthalmic instruments and eye care diagnostic devices, optical lens manufacturing equipment, vibration cancellation systems and enclosures, and advanced scanners used in reverse engineering, quality assurance and 3D printing.
Siblings
-
AMETEK Programmable Power, Inc.
Located in San Diego, CA, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
Siblings
-
Ametek Power Instruments
AMETEK Power Instruments serves the world-wide electric power generation and distribution industries with our advanced instruments and monitoring systems. We offer an extensive sales and service network around the globe including the US, UK and Asia. We can provide fault recorders, power line carriers, high accuracy revenue meters, alarm management and much more for your power generation, transmission and distribution needs. Our engineers have decades of design experience and work with each client to meet their stringent requirements. AMETEK Power Instruments has over 50 years of experience partnering with leading Fortune 500 companies.
Siblings
-
AMETEK Thermal Process Management
Thermal Process Management (TPM) is a Business Unit in the Process Analytical and Instrumentation Division of AMETEK. TPM is comprised of 5 companies with unique and distinguished product solutions, leading share in their respective market space, and operating with considerable market synergies. TPM manufactures industry leading thermal management systems, winterization solutions for instrumentation, and process extraction, transport, and conditioning systems.
Siblings
-
Barben Analytical
AMETEK® Barben Analytical is a market-leading supplier of analytical measurement solutions for the process industries. We design, manufacture, and sell a broad range of industrially hardened instruments, including pH and ORP electrochemical sensors, as well as gas and liquid phase optical oxygen analyzers.
Siblings
-
Ametek Spectro Scientific
Spectro Scientific, an ISO 9001:2008 company, specializes in analytical tools and software for machine condition monitoring. The company is one of the largest suppliers of oil and fuel analysis instruments to industry and the military worldwide. Industry clients include petrochemical, mining, marine and power generation companies as well as commercial testing laboratories. Spectro Scientific’s extensive product offerings include spectrometers for wear metal analysis, lubricant degradation and contamination analyzers, particle analysis instruments and complete turnkey systems for oil or fuel analysis laboratories, all managed by its SpectroTrack software platform.
Siblings
-
Haydon Kerk Pittman
Haydon, Kerk and Pittman are three world class AMETEK brands that supply advanced linear and rotary motion solutions to a diverse mix of global customers. We are recognized as a leading manufacturer of brushed and brushless DC motors, stepper motor based linear actuators, precision Acme lead screw and anti-backlash nut assemblies, linear rail and guide systems, gearmotors, drives and complete custom automation sub-systems.
Siblings
-
NSI-MI Technologies
NSI-MI Technologies is the leading global supplier of antenna, RF, and microwave testing equipment. With a team of highly respected technical experts, we are committed to providing top-notch engineering solutions and advanced products for a wide range of industries that require precise measurement, motion control, and data acquisition.
Siblings
-
United Electronic Industries, Inc.
Produces data acquisition hardware, signal conditioning and support software as needed in today's sophisticated, demanding test environments...
Siblings
-
RTDS Technologies
Being the first of its kind, the RTDS® Simulator is the world’s benchmark for performing real time power system simulation. With satisfied customers in 42 countries across the globe and over 1400 units in operation, RTDS Technologies is the undisputed world leader in our craft. We introduced the world’s very first fully digital real time power system simulator in 1989. RTDS Technologies continues to lead the way with our world-class, in-house research and development department. Our company is committed to innovation. We are continually developing our hardware, software, and support services in response to the needs of our customers.
