PCB Piezotronics, Inc.

Product

Endevco Piezoresistive Undamped MEMS Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

PCB's acquisition of Endevco's full line of testing sensors means all Endevco sensors are now backed by PCB's Total Customer Satisfaction (TCS) guarantee.

Product

Pressure Transducers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

An electromechanical device designed to measure pressure with a high degree of accuracy.

Product

Miniature Triaxial Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Miniature triaxial accelerometers are available in a variety of sensitivities to suit specific application requirements. These small and lightweight units have a high frequency response and minimize mass loading on test structures. They are ideal for installation in space restricted locations

Product

Accelerometers

356A02

-

PCB Piezotronics, Inc.

356A02 - PCB Piezotronics, Inc.

Sensitivity (10 %)10 mV/g1.02 mV/(m/s) Measurement Range:500 g pk4900 m/s pk Frequency Range: (5 %)1 to 5000 Hz1 to 5000 Hz Frequency Range: (10 %)0.5 to 6000 Hz0.5 to 6000 Hz Resonant Frequency:25 kHz 25 kHz Broadband Resolution (1)0.0005 grms 0.005 m/s rms Non-Linearity: (400 g, 3920 m/s)1 % 1 % Non-Linearity (500 g, 4900 m/s)2 % 2 % Transverse Sensitivity:5 % 5 %.

Product

ICP Microphone System

378A14

-

PCB Piezotronics, Inc.

378A14 - PCB Piezotronics, Inc.

This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration.

Product

Hydraulic & Pneumatic Pressure Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

One of the toughest applications for pressure sensors is measuring high pressure, repetitive pulses, such as those encountered in hydraulic applications. However, our pressure sensors are designed to continuously measure repetitive pulses during applications such as hydraulic cylinder “torture” testing or diesel fuel injection. Ordinary diaphragm-type sensors usually fatigue quickly in such applications.

Product

Precision Condenser Microphone

377C01

-

PCB Piezotronics, Inc.

377C01 - PCB Piezotronics, Inc.

Performance:Nominal Microphone Diameter:1/4"Open Circuit Sensitivity 2.0 Open Circuit Sensitivity (3 dB)-54 dB re 1 V/PaFrequency Range Inherent Noise<35 Temperature Coefficient of Sensitivity (+14 to +122FHousing Material: Stainless Alloy

Product

Industrial ICP® Strain Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

For Process Monitoring/Quality Control. The Industrial ICP® Strain Sensors incorporate piezoelectric quartz sensing crystals that respond to a longitudinal change in distance. The resultant strain measurand is an indirect measurement of stress forces acting along the structure to which the sensor is mounted. As such, these devices can provide insight into the behavior of mechanical systems or processes that generate an associated machinery reaction.

Product

Torque Transducers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

The technology behind our torque sensors are strain gages. These gages are arranged into a Wheatstone Bridge circuit, which converts the physical, mechanical force into an electrical signal that can be filtered, displayed, and recorded for further processing. This very accurate radiometric electrical signal is proportional to the applied mechanical force.

Product

Microphone Preamplifier

426B31

-

PCB Piezotronics, Inc.

426B31 - PCB Piezotronics, Inc.

Performance:Nominal Microphone Diameter:1/4" Frequency Response:3.98 to 126000 Hz3.98 to 126000 10.0 to 126000 Hz10.0 to 126000 HzElectrical Noise (A-weight)3.8 TEDS CompliantYes

Product

3-Component Quartz Force Links

261 Series

-

PCB Piezotronics, Inc.

261 Series - PCB Piezotronics, Inc.

Three-component force links eliminate the preload requirement of 3-component quartz force ring sensors, and offers a convenient, 4-screw hole mounting plate on each side end the sensor. Quartz 3-component force links are constructed by installing a 3-component force ring sensor, under preload, between two mounting plates.

Product

High Temperature ICP® Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

PCB® offers specially designed and tested ICP® accelerometers for conducting vibration and shock measurements under demanding environmental conditions of up to 356 °F (180 °C). These sensors combine proven quartz and ceramic shear sensing technology with specialized, built-in microelectronic signal conditioning circuitry to achieve dependable operation in extreme temperatures and through repetitive temperature cycling. Laser-welded, hermetically sealed, lightweight titanium or stainless steel housings offer further protection from the environment. Prior to shipment, each sensor undergoes a battery of tests to ensure survivability for its intended use. Such tests include temperature soak at elevated temperatures, temperature cycling, and exposure to highly accelerated screening procedures with hydraulically actuated shakers.

Product

Rod End Load Cells

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Our rod-end load cells are designed for integration into tension measurement. They are versatile, durable, and fit easily into small spaces such as inline with vehicle tie rods.

Product

Accelerometers

352C33

-

PCB Piezotronics, Inc.

352C33 - PCB Piezotronics, Inc.

Sensitivity (10 %) 100 mV/g10.2 mV/(m/s) Measurement Range:50 g pk 490 m/s pk Frequency Range (5 %)0.5 to 10000 Hz0.5 to 10000 Hz Frequency Range (10 %)0.3 to 15000 Hz0.3 to 15000 Hz Resonant Frequency:50 kHz50 kHz Broadband Resolution(1)0.00015 grms0.0015 m/s rmsNon-Linearity:1 %1 % Transverse Sensitivity:5 %5 %.

Product

Microphone Preamplifier

HT426E01

-

PCB Piezotronics, Inc.

HT426E01 - PCB Piezotronics, Inc.

Nominal Microphone Diameter1/2Frequency Response Electrical Noise(at 22 C) (Flat 20 Hz to 20 kHz)Distortion (3 V rms input at 1 kHz)<-70 dB<-70 dB[1] EnvironmentalTemperature Range (Operating)-40 to +248 FExcitation Voltage 20 to 32 Constant Current Excitation 2 to 10 mA