Showing results: 16 - 30 of 32 items found.
-
SY024RG -
Synectic Electronics
The SY024 Ramping Signal Converter is used to create a ramping 4-20mA or 0-20mA linear signal which is ideal for driving a proportional valve. The signal convertors time it takes to reach 20mA is programmable by the rotary switches in 10msec steps up to 99.99secs. The signal will ramp up until the contact is broken or it has reached the 20mA and will stay there for as long as the unit is powered.
-
SY0485 -
Synectic Electronics
The SY0485 RS232-RS485 Serial Converter connects to an industrial PC serial port or a PLC serial port and enables multiple drop communications over an RS232 network which is designed for simple two way communications.
-
Synectic Electronics
The SY018 DIN rail Voltage to 4-20mA signal converter is used to communicate analogue signals over long distances where electrical interference may be a problem. This solution is often used in the process control industry to collect the analogue values from a wide array of remote sensors. The converter is valuable because current signals are much less susceptible to noise than voltage signals. A voltage signal can be converted to current and broadcast over a long distance. 4-20 mA transmitters are common in the industry and used with high-quality sensors. The resulting signals can be use in controlling drives or to trigger instruments that have settable thresholds and limits.
-
Synectic Electronics
SY024 PR* is a Pulse Rate-Analog converter designed to accept a frequency and produce a proportional Current or Voltage output. The current output can be 0-20mA or 4-20mA and the voltage output version is user adjustable from 0-5V to 0-10V.
-
SY-Flow-BLFT -
Synectic Electronics
These flow meters offer the following features, high accuracy, good repeatability, ease of maintenance and simple well proven design.
-
SD037 -
Synectic Electronics
Synectics’s SD037 dynamically monitors mains frequency. The filter enables high speed, high accuracy, frequency monitoring even with high levels of harmonic noise. The SD037 is highly prized in demand side energy management and the associated battery storage technologies. The unit monitors the frequency of a mains voltage signal and reports the value, on demand, via an RS232, RS485 using either simple ASCII commands or Modbus protocol.
-
SY038 -
Synectic Electronics
The SY038 is a strain gauge bridge amplifier ideal for use in load cell amplification. This Load Cell Amplifier has a variable gain functionality using a miniature dip switch which enables the user to select one of 16 ranges for transducer outputs as low as 0.25mV/V and up to 4.4mV/V, higher if specified. It has the best stability in its class and high immunity to interference. Non-interactive Zero and Span trimmers are screw driver adjustable giving a further +/-20% adjustment.
-
SD035-ICA -
Synectic Electronics
SD035-ICA is a Miniature Incell Load Cell Amplifier. Designed to fit inside majority of load cells, pressure and torque transducers. The SD035 in cell load cell amplifier excites provides excitation voltage and signal conditioning.
-
SY031 -
Synectic Electronics
SY031 Portable Digital Load Meter is a handheld battery powered instrument. The 4.5 digit 24 bit instrument displays measurements from load cells, torque transducers and other strain gauge bridge transducers. The meter offers peak and trough hold and up to 16 channels of stored (load cells or other sensor) calibration data, stored in non-volatile memory.
-
SY018 -
Synectic Electronics
Our compact strain gauge amplifier can be used in applications requiring 4-20mA or a voltage signal from a strain gauge bridge transducer.
-
SY046 -
Synectic Electronics
The SY046 Digitally Tareable Load Cell Amplifier is an analogue amplifier with the digital gain advantages. This amplifier can excite up to 4 x 350Ω bridge transducers and provides either a 4 – 20mA, 0 – 5V or 0 – 10V output with a remotely triggered zero offset. This feature is of great value when load cells are difficult to access or other strain gauged components have been installed in difficult environments. The display is very useful during set up and calibration.
-
SY081 -
Synectic Electronics
The SY081 Strain Gauge Indicator is a hi-resolution 24bit load indicator. The meter can measure scaled loads on a variety of tranducers. It can display weight, pressure and also torque and offers 10 channels, and 7 point linearisation. The meter is easy to calibrate by applying a known load, or you can enter the mV/V of the load cell from a calibration certificate. The SY081 has a shunt calibration option and a fine adjustment facility to correct for drift over time in transducers.
-
SY-FM1 -
Synectic Electronics
SY-FM1 flow meter transducers have been designed for use with mains and heating system water.
-
SY008 -
Synectic Electronics
The SY008-VI Sensor Signal Conditioning Module converts 0-5V dc in to 4-20mA out. The SY008 can either provide a 5V or 10V source to a variety of transducers; load cells, RVDTs, potentiometers(precision linear transducer), tilt sensors and contactless position sensors. Almost any sensor that produces an output signal voltage in the range 0-5V dc.
-
Synectic Electronics
The SY008 VI Load Cell Sensor Signal Conditioner IP66 converts 0-5V dc in to 4-20mA out. The SY008 can either provide a 5V or 10V source to a variety of transducers; load cells, RVDTs, potentiometers (precision linear transducer), tilt sensors and contactless position sensors. Almost any sensor that produces an output signal voltage in the range 0-5V dc.