|Sponsor Your Catalog|
MAXIM - Protocol Test, Measure, Simulate and Analysis Software MAXIM addresses the need for specialized databus and I/O test & measurement solutions that engineers and technicians can easily use and customize to fit their specific requirements. Multiple protocol and I/O including MIL-STD-1553, ARINC 429/575, ARINC 561/568, ARINC 629, ASYNC RS-232/422, ASCB, CSDB, HDLC,
SDLC and many more....
K1205 - Series Protocol Tester - GSM PCS Software Tektronix offers the following software packages for the mobile network GSM for K1297 and K1205 Protocol Testers. With the software, functions of the GSM network elements Base Station Subsystem (BSS) and Network Switching Subsystem (NSS) and their interaction can be tested
U4305A-021 - Protocol Test Card 3.0 Software Licence U4305A Option 021 Protocol Test Card is a Keysight third generation PCIe 3.0 link transaction compliance test tool. Designed to the requirements of the PCI-SIG®, the industry organization chartered to develop and manage the PCI Express standard, the PTC3 will provide the Independent Hardware Vendor (IHV) and Independent BIOS Vendor (IBV) with link transaction test results designed to maximize interoperability and conform to current PCIe 3.0 industry protocol specification.
Communication Protocol Test Harness Software Windows application that simulates typical Master or Outstation Devices, monitors communications and automates functional testing. Optional module automates conformance tests specified by technical committees of each protocol. IEC 60870-5-104, IEC 60870-5-103, IEC 60870-5-102, IEC 60870-5-101, Modbus TCP, Modbus Serial ASCll/RTU, Modbus Plus.
Zumara - Protocol Analyzer, Simulator and Conformance Test Software Our new Zumara software can simulate multiple SIP or H.323 endpoints via the PC host NIC or a combination of NIC and LAN adapters. This transforms a standard PC host into a powerful VoIP simulation, analysis, traffic generation and quality measurement tool.
SIGTRAN - Protocol Analysis SIGTRAN protocol decoder software is a VoIP testing tool that permits real-time analysis, call trace, capture, and filtering of SS7 and ISDN signaling messages over IP. SIGTRAN uses a new connection oriented transport protocol called Stream Control Transport Protocol (SCTP). SCTP is at the same level but more efficient at transport than TCP, UDP, or RTP.
fcXplorer - Fibre Channel Simulator & Analyzer Test Software fcXplorer, AIT's Fibre Channel Simulator and Analyzer Test Software provides an intuitive Graphical User Interface (GUI) for AIT's Fibre Channel Simulyzer™ interface modules. fcXplorer troubleshoots, optimizes, plans and configures Fibre Channel traffic loading. Low- and High-level protocol analysis features provide capture, filter, time stamp and interpretation of Fibre Channel traffic and generation of advanced statistics. fcXplorer can alert engineers to potential performance and configuration problems allowing users to quickly identify and remedy any anomalous network condition.
PacketScan - SIP / H323 / Megaco / MGCP / RTP / RTCP / Video Analysis PacketScan™is a powerful software tool that features real-time capture and monitoring of live IP, VoIP, and IP based Video traffic. It Segregates, captures, and collects statistics on VoIP calls (H323, SIP, MEGACO, MGCP, T.38, and others), monitors QoS (quality of service) on voice and video calls, permits analysis of adherence to protocol standards for the system under test or observation, provides graphical presentation of analysis, including ladder diagrams of protocols.
Electrical Safety Tester / The robust, fully automatic Electrical Safety Tester ST400 ensures fast testing cycles incl. documentation (backtracking of data – Traceability). In addition to that, the ST400 Electrical Safety Tester also disposes two USB- Interfaces, LAN, RS232 and digital, as well as analogue I/O ports. I/O tests are ideally used to automatically pilot external systems. The test procedure with an Electrical Safety Tester results as follows: Connect the testee (device under test), chose the settings for the test program (automatic barcode if provided), test and save test protocol. The Electrical Safety Analyzer can of course also be operated manually through a spin-press button, similar to GPS systems used in automobiles. The following operating modes are available: Manual, Remote RS232/USB, Digital and Ethernet. Each Electrical Safety Analyzer can be remote controlled through a comfortable testing software. The GOOD-BAD results will be saved automatically on your databank. Electrical Safety Analyzers will be delivered including a leakage current test in case the device needs to be used in accordance with the medical-technical norm EN 60601. The Electrical Safety Testers of the 60335 series are easy to integrate at the workplace and laboratory.
Octane Test Servers Octane Test Servers provide a remotely controllable, high bandwidth, small footprint test platform for SAS/SATA/PATA and U320 Hard Drive Testing. Available in 2U (8 Port), 3U (16 Port) or 5U (24 Port) configurations, this versatile family of testers can fit any space or budget. Octane integrates the latest in protocol and server technology with the extensive scripting capablity of our test software to provide a solution for both manufacturing and engineering applications.
T4110S - LTE Protocol Test System Protocol conformance testing of LTE UEs More than 80% coverage of GCF/PTCRB Protocol LTE test cases with just one dual cell T2010A unit Complete coverage of 3GPP 36.523-1 LTE protocol conformance test cases with just two T2010A units Same hardware configuration as T4020S LTE RRM tester, allowing software only upgrade between both products LTE FDD, TDD and multi-RAT support in the same hardware platform Full test system automation and UE automation capabilities allowing unattended operation of the test system Easy to use test project management environment for streamlined testing execution and results analysis Powerful test case results and logs analysis tools
KTS520 - Porsche PIWIS Tester 1. Simple adaptation to laptop or PC through USB or serial standard interface 2. Powered by ESI(tronic): ideal in combination with the workshop software for fast and targeted vehicle diagnosis in the workshop. 3. Full range of ESI(tronic) test specification immediately available. 4. Both models are equipped for all current diagnosis protocols: - ISO systems of European vehicles - SAE systems for American and Japanese vehicles - CAN protocols for testing state-of-the-art CAB bus systems in new vehicles rachel(at)cnreliable.com 5. Direct multiplexer connection via OBD line to the diagnosis socket; 6. Software automatically controls multiplexer - thus dispensing with need for troublesome changing around of communication connections.
Free Modbus Device Tester Software This software was developed to test Information Displays made by Global Multimedia for modbus protocol compliance. It can be used to test your firmware on a serial device for Modbus RTU conformance.
DMXter4 RDM - DMX Tester The DMXter4 RDM takes the next step in protocol testing. It provides expanded DMX testing along with growing support for RDM testing and configuration. Who else would you trust to support the new standard? The DMXter4 is simple to use. Eight buttons run its menu-driven software. The DMXter4 uses a back lit 40-character display. Some functions can drive a PC using the USB port. Software updates are done via the USB port.
GDU - Aeronautical Ground Data Unit Aeronautical Ground Data Unit (GDU) is a software application that runs on the generic Physical Layer Tester (PLT) platform. The GDU supports the testing of physical layer performance and protocol operation for Ground Earth Stations
MD8480C - W-CDMA (UMTS) Signalling Tester The MD8480C W-CDMA Signalling Tester has been specifically designed for developing and testing 3GPP wireless devices including protocol stacks, chipsets, and application software. Supporting W-CDMA, HSPA, HSPA Evolution, GSM, GPRS and EGPRS services in a single unit, it is the industry's first HSPA signaling tester and the only one with full HSPA capability including 42 Mbps DL/11 Mbps UL maximum data throughput. The MD8480C's air interface fully complies with the 3GPP recommendations.
NDMP Protocol Test Suite Network Data Management Protocol (NDMP) product from DinoStor include DinoStor TapeServer, DinoStor NDMP Server Development Kit, NAS software development services, and interoperability testing.
R1200 - RFID TESTER The R1200 RFID Tester is a conformance test and measurement solution for radio frequency identification (RFID) devices. It is the first instrument in the world with a built-in RFID protocol stack and real-time communications capability. The tester is based on NI Software-Defined Radio (SDR) Platform, including a 2.7 GHz upconverter, a 2.7 GHz downconverter, a 6 GHz RF powermeter, and an FPGA-based IF transceiver. With the capability of real-time vector RF signal generation and analysis, the tester can generate and analyze the RFID signal according to all RFID standards.
UXM Test and Lab Applications The UXM test application (TA) and lab application (LA) software allow you to configure your E7515A UXM wireless test set to meet your particular testing needs. The test application software provides the network emulation, receiver, and transmitter test functionality required to validate the latest RF designs. The lab application software also includes capabilities to validate UE and chipset functional performance, such as data throughput, complex handover scenarios, and protocol logging.
OidView - SNMP Testing Module When developing an SNMP Agent, it is necessary to run comprehensive tests in order to check for compliance with the SNMP protocol standard and also compliance with the syntax of the MIB objects that will be represented. OidView now has a built-in SNMP Agent testing module (available in the Pro and Enterprise versions), that will enable the software developer to test the agent implementation and verify that it is compliant.
J6840 - Network Performance Tester The Network Analyzer - Wireline Protocol Test (J6840) is a wireline software application for full 7-layer protocol analysis and troubleshooting of LANs, WANs and ATM networks, delivering statistics, decodes, expert analysis, protocol vitals, connection stats, & extensive VoIP analysis.
Avalanche - System and Network Equipment Testing Spirent Communications' Avalanche product line simulates real-world user behavior, network conditions, and large web and application infrastructures. Avalanche eliminates the need for expensive testing infrastructures by emulating the behavior of up to two million users in a single, compact device. With Spirent's range of next generation testing solutions, you can test applications and network systems at and beyond expected peak volumes. This enables problems to be isolated and corrected before performance suffers or a network outage occurs. Avalanche can be used in tandem with the Reflector test appliances to provide accurate multi-protocol responses to the requests it generates. Together, the two systems test the capacity of any device or network connected between them. Spirent solutions offer extraordinary performance and ease of use in a combined hardware and software package ideal for enterprise network operators, equipment manufacturers, and service providers.
T3111S - NFC Conformance Test System Supports Analog RF and Digital Protocol parts of NFC, EMVTM and ISO test specifications Platform supports R&D, pre-conformance and conformance testing Recognized by NFC Forum certification program EMV Level 1 PICC/Mobile and PCD pre-conformance test with qualification underway Software-upgradeable, integrated, automated, extensible test platform Available with automatic position robot for accurate antenna location Easy-to-use test manager for execution and results analysis
MX786201A - W-CDMA (UMTS) Rapid Test Designer (RTD) MX786201A W-CDMA Rapid Test Designer (RTD) software is a revolutionary new tool that significantly speeds up the development and deployment of W-CDMA (UMTS) user equipment (UE) by greatly simplifying the way in which tests are created, executed, and analyzed. No knowledge of TTCN is required; users can concentrate on testing specific functions and protocols within the UE without having to be expert on all the 3GPP protocol layers.
Results 1 - 24 of 77
- Software x
- Analysis (28)
- Analyzers (23)
- Bus (11)
- Communication (10)
- Data (13)
- Development (10)
- Instrument Control Buses (24)
- Interfaces (21)
- Level (11)
- Logic (9)
- Network (14)
- PC (10)
- Protocol Analyzers (23)
- Serial (10)
- Services (9)
- Standards (10)
- Test Applications (10)
- Testers (16)
- Testing (10)
- Time (17)
- »See All 395 Features