Optical Networks

Toronto, ON - GAO Tek Inc. has released a series of small form factor pluggable optical transceivers (XFP), which are fully compatible with Extreme’s original products. XFP modules support 10 Gigabit Ethernet IEEE standard interfaces as 10GBASE-LR, 10GBASE-ER and10GBASE-SR. Since the introduction of 10 Gigabit Ethernet, there has been a steady inc ...more

The ONA 600 Optical Network Analyser is a powerful and versatile tool for characterisation of optical fibers and networks. The system consists of a mainframe, plug-in modules for measurement of Chromatic Dispersion, Polarization Mode Dispersion and Spectral Attenuation with a full range of optical light sources. Designed to deliver superior pe ...more

FCST08221 Mini optical light source is the most rugged size instrument in the industry. It integrates the super small size and strong function in one unit. With 3 pieces of 1.5v alkaline batteries, can work 40 hours continuously, the total weight is only 80g .Together with FCST08221 Mini optical power meter, they provide a excellent solution f ...more

The OWM is a cost-effective solution for optical monitoring of DWDM networks including DWDM optical power, wavelength, and OSNR. The OWM available in 50 GHz or 100 GHz configurations with up to 8 ports. The OWM is the first shelf-level, intelligent sub-system for centralized management of remote DWDM wavelengths that can also be used as a port ...more

GAO Tek Inc. Releases Juniper compatible XFPs Toronto, ON - GAO Tek Inc. has released a series of 100% Juniper compatible small form factor pluggable optical transceivers (XFPs). GAO’s XFP modules support 10 Gigabit Ethernet IEEE standard interfaces as 10GBASE-LR, 10GBASE-ER and 10GBASE-SR. There has been a steady increase in enterprise and serv ...more

The Noyes OLS7-FTTH and OLS7-3 laser sources from AFL Telecommunications are cost-effective, rugged, handheld instruments designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, both models may be used for fiber identification. The ...more

Trend's Optical Attenuator provides configurable, precise attenuation to optical links from 2 dB to 60 dB. This tool perfectly complements any tester for optical networks, and it is useful for link simulation and optical margin testing. ...more

Anue OTN Signal Delay Network Emulators provide WAN simulation for testing transport solutions in a lab environment. OTN Signal Delay Network Emulators can reproduce the delay and impairments experienced by Optical Transport Network signals across MANs and WANs. ...more

The NPRT 2200 performs Noise Power Ratio measurements to determine the dynamic range of optical transmitters, amplifiers and other active devices used in HFC networks. It has an internal broadband noise source, selectable filters and a measuring receiver. ...more

The Noyes M200 from AFL Telecommunications offers unmatched OTDR capabilities in a handheld package weighing less than 1 kg (2 lb). Multimode, Single-mode, and Quad wavelength models are offered. With short dead zone and intermediate range specifications, the M200 is ideal for Tier 2 testing of premises (building and campus) networks or certif ...more

The Noyes OPM5 optical power meter from AFL Telecommunications may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 5 also measures insertion loss of multimode or single-mode cables. The OPM5 offers Wave ID, automatic wavelength identification and switc ...more

First responders to network emergencies rely on the EtherScope Series II Network Assistant when it's time for action - a handheld portable network analyzer combining essential tools that help network professionals quickly solve the wide range of problems they encounter - 10,100 and Gigabit, twisted pair and optical fiber LANs and wireless LANs. ...more

Certifies compliance of multimode fiber networks to industry standards. Look to CertiFiber to test more fibers in less time. With its one-button Autotest, CertiFiber allows you to measure fiber length and optical loss on two fibers at two wavelengths, compares the results to the selected industry standard and provides an instant PASS or FAIL i ...more

The 557B 3 x 3.5 mm Si optical power meter is a general purpose instrument suitable for conducting fiber optic measurements on systems and networks based on a single-mode, multimode, plastic, and large core glass optical fibers.  ...more

The Noyes OFI-FTTx from AFL Telecommunications is a rugged, hand-held optical fiber identifier designed to identify the presence or absence of an active Optical Network Terminal (ONT) on FTTx F2 fibers at the Fiber Distribution Hub (FDH). During a test the F2 fiber does not have to be removed from service. Thus the OFI-FTTx can verify whether ...more

Fiber optic metro networks. Fiber optic sensor systems. CATV systems. Fiber optic test equipment. Filter Wavelength Division Multiplexer ( FWDM ) are based on thin film filter technology and metal bonding micro optics packaging .It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path ...more

The 752L is a versatile, stable 850nm and 1310nm LED source suitable for single-mode and multimode optical fibers. Both outputs are designed to achieve an overfill launch condition into most graded-index multimode fibers used for telecommunication systems, data communication networks, and other applications. ...more

The OFL 200 OTDR sets new standards for size, weight, ease-of-use, and value in a telco/broadband OTDR. Smaller than many optical loss test sets, the OFL 200 has the range, features, and price to make it the perfect OTDR for outside plant crews installing and maintaining optical fiber cables in broadband, metro, access, and FTTH networks ...more

The Noyes portable optical power meter from AFL Telecommunications may be used to measure optical power (dBm) in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM1 can also measure the attenuation (insertion loss) of multimode or single-mode cables.With only two controls ? ON/OFF and wavel ...more

The NEXUS - PMD is a portable test instrument designed to provide accurate in-system PMD measurement. It allows transmission system suppliers and operators to measure the total end-to-end PMD of systems with the minimum of disruption. Using the standard light source, PMD can be evaluated in the C and L band, enabling the performance of modern ...more

The Noyes OFL 250 from AFL Telecommunications is a Single-mode OTDR with an integrated Optical Power Meter (OPM), Laser Source (OLS), and Visual Fault Locator (VFL) in a handheld package weighing only 0.8 kg (1.7 lb). With short dead zone and mid-range dynamic range performance, the OFL250 is ideal for testing optical fibers in service provide ...more

Dense Wavelength Division Multiplexer provides ITU channel center wavelength, low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path . It can be used for wavelength add/drop in telecommunication network system. ...more

The M100 OTDR is a handheld, single-mode and multi-mode, four-wavelength Optical Time Domain Reflectometer with integrated VFL (visual fault locator). Using PDA technology the M100 reaches a new level of value and portability. By combining a simple user interface with the features of a mini-OTDR in a micro package, the M100 is ideal for premis ...more

The LL802D optical node is designed for daisy-chain network topologies in campus deployments or Intelligent Traffic Systems and similar applications. Each node has two fibre ports and four copper ports ...more

The Harris palmOTDR-S20 is an optical fault locating and analyzing tool for optical fiber networks. The palmOTDR is handheld, compact, lightweight and easy to use. It has powerful functions, such as supporting averaging and real-time test mode. The unit can be used for single-mode (1310/1550 nm) fiber applications. ...more