Mil

MIL-STD-1553 A, B & McAir MULTI PROTOCOLS Simulator/Analyzer/Tester PCI BUS Interface Card - The PCI301 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor frame tim ...more

Serial RS422, RS423, RS232 analyzer tester and data line monitor with buffer capacity of 1 megabyte of memory. Line speeds to 230.4K (half duplex), 75-115,200 asynchronous, 75-64 kbps synchronous and bisynchronous, SDLC/HDLC, isochronous protocols. Supports MIL-Std-188-114 monitoring, testing and RS485 simulation. Small, lighweight and portabl ...more

The Fluke 27 combines accurate digital and analog measurement capability with extreme ruggedness and durability. They have cases twice as thick as any other DMM we build. They are totally sealed, waterproof to 3 feet (one meter) of water for one hour, tough enough to withstand contaminants, chemicals, accidental drops and severe electrical ove ...more

Includes all the basic features required for low resistance measurements. Easy to use and the most accurate unit available in its price range. Can be used in both bench top or automated production environments. Configure instrument and log results to PC using Virtual Front Panel Software ...more

With an extended measurement range from micro-amps to hundreds of amps and milli-volts to kilovolts, the XiTRON 2801 and 2802 are ideal analyzers for standby power or Energy Star testing. Numeric results and waveforms can be displayed, read via the communication ports (RS-232, GPIB, USB, and Ethernet), or sent directly at full resolution to a ...more

Complete more installs faster and better using the Super Buddy satellite finder meter. Be "sure of your bird" with the positive ID feature or use the automatic scan to identify the unknown satellite. The Super Buddy's geo-sensitive "Field Guide" shows you just the birds visible to your install -- ALL of them, with their ind ...more

BCO, Inc. Automated Test Systems; specializes in system design and build of military ATE and TPS support. Our Test Engineering Group designs and integrates a complete solution that includes the automated test equipment, interface devices, test fixtures, cables and test programs. Our Measurement and Control Systems Group designs and builds comp ...more

The 316 is the perfect Clamp Meter for many electronic applications. Because this meter was designed to measure smaller amounts of current it is ideal for quick non-intrusive current measurements. Measures current between 5% to 100% full scale. Measures AC/DC Volts to 600V ...more

The model 310 Digital Milli-Ohm Meter is used to ensure continuity and integrity of a wire, cable, conduit or any electrical connection. The 310 has a display resolution of 100 micro-ohms and has a professional four wire Kelvin test lead set included to ensure accurate readings. The heavy duty case has a rubber seal to make the unit water resistant ...more

MIL-STD-1553 A, B, & McAir MULTI PROTOCOLS Simulator/Analyzer/Tester type 2 PCMCIA BUS Interface Card - The PC401 can be used for Validation Testing, ProductionTesting, full bus simulation and monitoring, as a generalpurpose 1553 interface or a stand alone bus Analyzer. Forprecise message scheduling and measurements, the Majorand minor fra ...more

MIL-STD-1553 A, B & McAir MULTI PROTOCOLS Simulator / Analyzer / Tester CPCI BUS Interface Card - The CPCI301 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor fra ...more

Economical, portable RF test enclosures, sized from aluminum benchtop to room-sized metallic-fabric enclosures that fit in a carrying bag. Great for initial compliance testing, equipment tuning, troubleshooting in an RF-free environment, or for instant military-secure communciation environments. Built-in illumination. From $1000 up. ...more

NAI offers a wide variety of COTS and Custom Power Monitoring devices, specifically designed for the rugged-Military and Commercial Aerospace markets. Unit types include monitors for in-spec performance of AC Power, DC Power, Power Frequency, and Power Phase. All Power Monitors output a relay alarm when the parameter being monitored is out-of- ...more

NAI offers a variety of PWM Motor Drives and Synchro Booster Amplifers, specifically designed for the rugged-Military and Commercial Aerospace markets. They provide small size, high power-density, high reliability, and rugged packaging  and are available in ratings up to 30 VA. The PWM Motor Drive units offer extensive diagnostics and Bui ...more

NAI offers a variety of Synchro Converter Modules and Reference Modules, specifically designed for the rugged-Military and Commercial Aerospace markets. They provide resolution to 16-bit, accuracy to 19.8 arc-seconds, and drive capability to 5 VA. The units are transformer isolated and operate over the frequency range of 47 Hz to 10 KHz. ...more

NAI offers Second Harmonic Converters, specifically designed for the rugged-Military and Commercial Aerospace markets. They provide conversion from Second Harmonic format to Variable Frequency format, and conversion from Phase format to DC format. ...more

The 75DS1 is a cPCI Synchro/Resolver Simulation Board that provides 4 D/S Converter Channels that can be used in single-speed or two-speed modes. It provides wrap-around self-test, PXI compatibility, optional Programmable Reference Supply, and is available for Military or Commercial applications. ...more

NAI offers a wide variety of COTS and Custom Power Supplies and DC/DC Converters, specifically designed for the rugged-Military and Commercial Aerospace markets. All of our AC/DC power supplies and DC/DC converters provide high power-density, low profile, high reliability, and rugged packaging. They are available in ratings from 15 watts throu ...more

The 75DL1 is a cPCI LVDT/RVDT Simulation Board that provides eight 2-wire or four 4-wire transformer isolated programmable outputs. It provides wrap-around self-test, PXI compatibility, optional Excitation Supply, and is available for Military or Commercial applications. ...more

The 64RS2 is a high-speed, DSP-based, VME Communications Board with 12, 8, or 4 full-duplex, independent and programmable, synchronous or asynchronous, RS-232C, RS-422, and RS-485 channels. It is available for Military or Commercial applications. ...more

NSG 438 ESD simulator comprehensively fulfills virtually all international standard requirements and supports proposed future standards. Air and contact discharge 200V to 30kV. Touch panel display controlled. Battery powered. Compliant with all known standards (IEC, ANSI, SAE, ISO, MIL etc). Interchangeable network modules. Discharge detector. ...more

The only true solution to provide you, the Do-It-Yourselfer, with an immediate recommendation on the urgency of your Check Engine Light problem. New Urgency Indicators tell how urgent the Check Engine Light problem may be to a vehicle’s drivability. In addition to the emissions and MIL status features access to dynamic web support information which ...more

CE/UL. DCV, ACV, Ohms,Continuity/Diode, Micro and Milli Amps. Auto Power Off/Low Battery indicator. Auto Ranging Data Hold/Max Hold. Self-contained probe storage and carry pouch. ...more

The Micro 700 uses Midtronics advanced conductance technology, making it easy to test the full electrical system on heavy duty vehicles, including trucks, construction equipment and military vehicles.  ...more

TÜV Rheinland is the world leader in automotive emissions testing, and has been setting the standard for vehicle inspection for more than 30 years. TÜV Rheinland performs millions of automobile emissions exams every year in countries around the world. In Germany, France, Spain, Latvia, Chile and Argentina, TÜV Rheinland supports emissions testing p ...more