Laser Diodes

The Model 2520 Pulsed Laser Diode Test System with Remote Test Head is an integrated, synchronized system for testing laser diodes early in the manufacturing process, when proper temperature control cannot be easily achieved. The Model 2520 provides all sourcing and measurement capabilities needed for pulsed and continuous LIV (light-current-v ...more

This small CW power supply can be used to power any diode or miniature laser up to 1900 mA maximum, including our SCL-CW-532-9.0MM-100 MiniGreen devices. The current to the laser is increased by turning the trim pot clockwise, while adjusting counter-clockwise decreases the current ...more

Variable Optical Attenuator are used in fiber optic transmission systems to reduce the optical power received by photo-detectors. The light intensity of laser diodes and LED's Should be controlled to be within their dynamical range. Otherwise, excess power level can result in undesired radiation pattern, modal structure and central wavelength. ...more

The T339-01B Basic Metal Case Power Meter is designed to measure optical power of LEDs or laser diodes with their associated cables. The unit offer measurements in dBm only at 850, 1300 & 1550nm. The unit works well with either singlemode or multimode fibers.  ...more

The LaserScribe Manually-Loaded Pallet (MLP) is designed to laser mark components mounted in a manually-loaded, removable fixture ("pallet"). The system incorporates a Vectormark" Compact diode-pumped YAG laser manufactured by Trumpf Inc. ...more

The LaserScribe EHM Laser Marker System is designed to mount to an Exatron Gravity Feed or Pick & Place handling system for marking the devices handled by that system. The system incorporates a Vectormark" Compact diode-pumped YAG laser manufactured by Trumpf Inc. ...more

The T339C CATV Metal Case Power Meter is designed to measure optical power of LEDs or laser diodes with their associated cables. However, the T339C enables extremely low level measurements with excellent accuracy. . The unit offer measurements in dBm only at 1300 & 1550nm. Measurements are made using patch cords. The unit work well with ei ...more

The new generation LaserSource benchtop laser diode drivers, available in 100mA, 500mA and 1000mA current ranges, are the most advanced economical solutions in the industry. ...more

The AmFax range of Laser Diode Test Systems have been based on the principle of maximising test through-put and minimising handling damage. The implementation of functional test instruments and techniques from Keithley Instruments provides a tried and trusted measurement solution but handling damage and low through-put makes laser diode (or any sim ...more

High speed pulse laser is converted to photoelectric by PIN type photo diode or APD. Photoelectric converted signals can be observed in a wave form by connecting to oscilloscope or to storage oscilloscope. ...more

The LaserScribe X-Y Pallet (XYP) is designed to laser mark numerous components mounted in a manually-loaded, removable fixture ("pallet") which moves under the laser field on a motorized X-Y table. The system incorporates a Vectormark" Compact diode-pumped YAG laser manufactured by Trumpf Inc. ...more

The T339-02 STD Metal Case Power Meter is designed to measure optical power of LEDs or laser diodes with their associated cables. However, the T339- 02 enables extremely low level measurements with excellent accuracy. The unit offer measurements in dBm only at 1300 & 1550nm. Measurements are made using patch cords ...more

The LaserWave-I measures the spectral properties of tunable lasers, laser diodes, LEDs and fiber optic components and systems from 190-1350nm. Over this range you can specify a 200, 400 or 600 nm Window of coverage with corresponding resolutions of about 0.3, 0.8 and 1.2 nm. The corresponding peak location accuracy is approximately ten times greate ...more

Accurately Measure Telecom and NIR Laser Sources with Spiricon?s 1550 Series Infrared Cameras and LBA-300/400/500 PC Beam Analyzers! Engineers and scientist are discovering very useful information by viewing the beam pattern from their telecom optical devices. This includes the output of both single and multi-mode fibers, the beam profile of l ...more

Breakthrough technology intelligent optical micrometer with 0.01-micron high resolution, 2400 samples/second high speed. Maintenance - free LED emitter and design (no laser diode or motor). High performance controller with statistical analysis. Controller with target viewer available for easy setup  ...more

The Snake Creek Laser SCL-HS-9.0MM heat sink is essential for the proper operation of the MiniGreen laser.  The design efficiently couples the diode to the heat sink over the entire diode base, which provides a longer diode lifetime and very stable operation ...more

For higher power applications, the new 4300 Series LaserSource benchtop laser diode drivers, available in 2A, 4A, and 8A current ranges, provide higher currents than our 4200 Series, but with all the same advancements and laser diode protection. ...more

Engineers and scientist are discovering very useful information by viewing the beam pattern from their telecom optical devices. This includes the output of both single and multi-mode fibers, the beam profile of laser diodes, the repeatability and uniformity of VCLES at wafer level, and the output of light emitting diodes, and other devices in ...more

The FS-1317 Dual 1550/1625 Laser Source operates at 1550 and 1625nm. The highly efficient, stabilized outputs use rear facet diode technology to compensate for short- and long-term drift. ...more

The FS-1316 Dual 1310/1550 Laser Source operates at 1310 and 1550nm. The highly efficient, stabilized outputs use rear facet diode technology to compensate for short- and long-term drift ...more

The Snake Creek Laser SCL-HS-5.6MM heat sink is designed to efficiently remove the heat generated by the MicroGreen 5.6 mm laser diode.  This design ensures that the diode does not overheat, which would result in premature diode failure.  ...more

Fixed Optical Attenuator are used in fiber optic transmission systems to reduce the optical power received by photo-detectors. The light intensity of laser diodes and LED's Should be controlled to be within their dynamical range. Otherwise, excess power level can result in undesired radiation pattern, modal structure and central wavelength. Su ...more

The LaserScribe Automated JEDEC Tray (AJT) Laser Marking System is designed to mark components in a JEDEC-outlined tray. The machine is available in two styles, Single Tray or with Multiple Tray Stackers. The system incorporates a Vectormark" Compact diode-pumped YAG laser manufactured by Trumpf Inc. ...more

A miniature power supply that provides up to 245 mA maximum CW current to a diode or miniature green laser including our SCL-CW-532-5.6MM-005 MicroGreen laser. Leads are provided at one end that connect to the diode or green laser while leads at the other end connect to a 3 V battery or power supply.  ...more

Laser Diode Driver (Pulsed Voltage) ...more