Fuel Cells

The 2273 is designed to be the most comprehensive potentiostat/galvanostat/FRA in your laboratory. Since no one can predict how research needs will evolve over the years, we've designed the ultimate electrochemical tool to satisfy your need not only for today, but for tomorrow. The PARSTAT 2273 is the combination of renowned reliability, high ...more

The 273A is the most widely sold potentiostat in the long history of potentiostats. In fact, it has been recognized as the benchmark against which all other potentiostats have been measured. With its 100 V compliance and 1 Amp maximum current, the Model 273A is capable of accurately controlling the potential in virtually any electrochemical ce ...more

VFD display. Convenient leaning numeric keypad. Work with CC,CR,CV,CW mode. OC,OV,OW,OT protection. Min Slope resistance less than 5.5 milli-ohm. Remote sensing function. Fuel cell test and short test function. Free software for calibration and  remote control ...more

The Evaluator series “LT” (Low Temperature) is typically used for testing polymer-electrolyte (PEM) and direct-methanol (DMFC) fuel cells with maximum temperatures of 130°C. For testing high temperature PEM fuel cells, we offer options with maximum temperatures of 180°C or 250°C. ...more

FCATS™ PEM fuel cell test systems offer full flexibility to test, control, and monitor the performance of fuel cells and stacks FCATS (Fuel Cell Automated Test Systems), are designed to meet the wide-ranging needs of PEM fuel cell stack manufacturers, material developers, system integrators and research organizations. ...more

MITS Pro software is based on the MITS (multiple integrated testing system) concept with an emphasis on user-friendly interface. It is the most powerful software available in the battery testing marketplace today.  It has been expanded to extend to fuel cell, supercapacitor, and other energy storage device testing.  ...more

At least, Viewpoint Systems doesn't think so! As leaders in the design and implementation of custom test stands, Viewpoint has a wealth of resources to draw upon to solve your needs for fuel cell testing. Our technical staff is our strongest asset.  ...more

The TrueData-CVM Cell Voltage Monitoring enables the multi-channel voltage monitoring of fuel cell stacks, batteries and supercapacitors. ...more

MODEL TL5 Intelligent Test Load for Batteries and Fuel Cells is a passive electronic load with built-in microprocessor intelligence, with the ability to briefly interrupt the current and take resistance free cell potential readings with programmable delay. There are additional inputs for a reference electrode and for a temperature sensor. ...more

The "technology of testing" with PEMFC and SOFC test systems is very different.  CFCL has over 10 years in developing SOFC systems, allowing CFCL the experience and knowledge in designing complete SOFC test systems that are safe, capable and can accurately reproduce the cell operating conditions of a SOFC appliance. The concept of CFCL's SOFC ...more

TESTMASTER is a powerful, integrated software package designed for testing of fuel cells and batteries. It runs on a PC computer in a Windows environment. It communicates with a combination of up to 16 TL5 and/or TL6 TEST LOADs in a daisy-chain configuration, by means of a single RS-485 serial port per TLIF. TESTMASTER performs all the tasks r ...more

The TrueData-EIS electrochemical impedance spectrometer is a high-capacity diagnostic tool to determine the impedance of fuel cells, membranes, MEA´s, single cells, stacks, batteries and supercapacitors. It uses a non-invasive method and allows the characterization of components during operation under different load conditions. The test item is sti ...more

MODEL TL6 Intelligent Test Load for Batteries and Fuel Cells is a passive electronic load with built-in microprocessor intelligence, with ability to briefly interrupt the current and take resistance free potential readings with a programmable delay. There are additional inputs, for a reference and for up to three temperature sensors. An expansi ...more

Model DOT-1000-2, is an ac four-terminal ohmmeter to be used for the measurement of dynamic ac resistance of batteries, fuel cells and other voltage sources. ...more

Precision Design Systems can build to print or custom design and manufacture Test Equipment to your specifications. Liquid or Gas Flow Test Systems, Pressure & Temperature Test Systems, Leak Test Systems, Electronic Load Test Systems, Automation Assembly Test Systems, Fuel Cell Test Systems, Vision Test Systems and DAQ Systems. ...more

The ElectroChem Power Station™ is the most advanced fuel cell test station commercially available. Fuel cell testing requires a system that will allow the user to program critical test parameters, accurately and repeatedly control test routines, and generate accurate, reproducible results. ...more

The Lab-Pro “Flexible Test System” by PDS provides test plans designed to perform accelerated testing, by means of elevated or decreased temperatures, increased electronic loads, varying fuel flows and compositions. PEM, SOFC, DMFC, MCFC Test Systems. ...more

QUICKCELL QC200 is an electrochemical test cell designed for testing of gas diffusion or solid electrodes in controlled laboratory environment in fuel cell and battery R & D and quality control. Electrode coupons of 5 cm2 area are very easy to mount. Electrolyte in the cell reservoir is maintained at desired temperature by means of a circul ...more

Specializing in fuel cell testing, Advanced Measurements manufactures customized test systems to meet each customer’s individual requirements. Our test systems can measure fuel-cell parameters such as humidity, temperature, gas flows, voltage and current while controlling all aspects of the testing environment. ...more

Our SOFC test stations are integrated measurement, testing and analysis systems, designed for the unique needs of the SOFC market. These systems include gas mixing, humidification, pre-heating, furnace, heat recovery and water balance modules. Systems can operate on gaseous or liquid fuels. Operating temperatures range up to 1000°C and operating pr ...more

A low cost manual test station which includes a gas management unit and an electronic load with voltage and current displays. System incorporates independent gas flow control of reactant mixtures, cell temperature control, and dynamic load control. ...more

The SERIES 4000 is a range of fully automated, computerized battery test systems that provide the highest level of specifications and features available in a Maccor test system. From the base system that provides the highest level of accuracy and time resolution, features can be added to allow the system to perform virtually any type of test, wit ...more

The Fuel Cell Test Stations provides control of flow, temperature and pressure for the anode and cathode gases. The station incorporates a DC electronic load. The Station also includes two humidity bottles, an Operating Manual and a computer utilizing LabView-based software. ...more

The Evaluator series “HT” (High Temperature) is specially designed for testing solid-electrolyt fuel cells (solid oxide fuel cells or SOFC) with maximum temperatures of 1,000°C. The test stations can be used for characterization of components, the evaluation of SOFC single cells, stacks, complete systems and hot-box systems as well as for optimiz ...more

SBS RBL series load banks are ideal for testing large batteries, power supplies, fuel cells, and other related DC power equipment. The high-range current capability and constant power feature facilitate battery testing and analysis. The ultra-fast slew rate provides unmatched power supply transient testing capabilities. ...more