Electronic Loads

This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. Single phase ...more

The model 8500 is an affordable full-featured Programmable Electronic DC Load with a high degree of accuracy and great display resolution. They are great units for DC Power Supply and DC-DC Converter testing and calibration. Because the are fully programmable via the RS 232 or optional USB interface they are ideal for Automated Test Systems ...more

The model 8510 is a cost effective Programmable Electronic DC Load with a high degree of accuracy, great display resolution and a wide operating range of up to 120A or 120V, 600W max. The 8510 is well suited for testing and calibrating DC Power supplies, DC-DC Converters and batteries. Programmability via the RS 232 or optional USB interface m ...more

3335A (+500W) & (+50W) Dual Load Module has two Electronic Load, which are used with the 3300C and 3300A Mainframes, but can be used with the 3302 mainframe. Each 3335A Module has its own control and display panel, CC/CR/CV/Dynamic modes, 150 Store/Recall and last setting memory on 3300C mainframe which provides load set-up more efficientl ...more

3256,3257 is a 300V high Power AC and DC Load in one unit, it provides an ideal testing solution for UPS, AVR, Battery, Power Transformer, etc. 3256E is a high power version of 3256, where 3256 and 3257 are suitable for 115/230V .  ...more

Electronic kWh Meters. Panel or DIN rail mounting, easy to install and convenient to use. Equally suitable for both 3wire and 4wire 3ø unbalanced loads (optionally for single phase or balanced 3ø systems), these Meters have been designed to measure accurately irrespective of the type of load ? ideal for a motor or heater, or for a modern elect ...more

Today's electronic products depend on the use of batteries ; either for wireless operation or for backup. Battery life and performance are key aspects of overall product performance, so incorporating the right battery into your product design is an important consideration. Percept's Battery Testing includes: Battery Life Cycle Performance Tes ...more

Components: PL 60/1 ? single-phase electronic phantom load. PEWM 1/1 S ? single-phase energy standard class 0.1. EH 11 ? scanning head for reading the pulses (rotations) of the electricity meter ...more

3320 series module are used with the 3302 and 3301 Mainframes. Please refer to 3300 series Mainframe section for details. Each 3320 series module has its own control and display panel with constant current operating mode. Optional Vsense Control Switches and disable SHORT keys are available.  ...more

MP-160 I-V Curve Tracer, which can measure all types of PV cell and module technologies. The MP-160 employs the electronic load method, and thus both a broad measurement range and high resolution are realized. The MP-160's performance makes it ideally suited both for indoor evaluation employing solar simulators, and for outdoor evaluations under na ...more

The MCL488 series of multi-channel electronic loads are ideal for ATE system and bench-top applications that require a multiple channel load with maximum flexibility. Each system consists of a sub-rack housing and modules. The load modules are rated at 50V, 100V, 400V or 600V and are rated for 175 watt and 350 watt operation. Up to 10 modules fit i ...more

3310D series Module are used with the 3302C single mainframe and 3300C 4ch Mainframes.Each 3310D Series Module has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 Store/Recall memory which provides load set-up more efficiently.  ...more

A solid oxide fuel cell (SOFC) test system. Custom designed to meet your SOFC testing requirements. Maximum Power: 150W-5KW. Variable electronic load options: Full software control; Constant DC power up to 150W; Constant voltage and constant current end power. ...more

Typical Load Range 0 - 20 A (settable by multi turn potentiometer)* Load Current Regulation  +/- 0.05 % (for a change of battery voltage form No load voltage to end voltage level)  Line Regulation  +/- 0.05 % (for +/- 10% change in mains supply)  Power Requirement 230 V AC +/- 10% 50Hz . Metering. 3 Digit Volt. Amp meter with select ...more

The As-513 can be used as an electronic load device for load testing AC power supplies and power equipment (instead of resistors, inductors, capacitors, or dummy network). ...more

PROGRAMMABLE POWER SUPPLY TEST SYSTEM. The BRAT Option B507 is an option to the BRAT Test System utilizing Commercial-Off-The-Shelf (COTS) equipment. The system is used to augment the existing BRAT capabilities to test power supplies.  ...more

The model 850e Multi-Range Fuel Cell Test System is a complete test station for operation and measurement of PEM/DMFC fuel cells. The 850e combines a computer-controlled instrument (multiple-current-range programmable electronic load, fuel and temperature controls, and data acquisition functions) with fuel handling hardware in an integrated be ...more

The High Power AC Load is a 300V high power AC load, it provides an ideal testing Solution for UPS, AVR, Battery, Power transformer, etc. The five states Memory and GO/NG check function is suitable for Production and Quality Control. ...more

AMREL's PLA Series of Air-Cooled Electronic Loads are designed for virtually all types of DC electronic Testing where either a static or dynamic loading is required. This load features 5 operating modes: Constant Current, Constant Voltage, Constant Resistance andConstant Power). Dynamic load profiling is achieved via it built-in pulse generato ...more

AMREL's PLA Series of Air-Cooled Electronic Loads are designed for virtually all types of DC electronic Testing where either a static or dynamic loading is required. This load is the 1st of its kind to come in a 1U-High Form Factor. It features 5 operating modes: Constant Current, Constant Voltage, Constant Resistance andConstant Power). Dynam ...more

This system includes all the equipment needed to measure solar cell I-V curves. Its solar simulator illuminates the test device while the electronic load sweeps the cell voltage from a reverse-bias condition, through the power quadrant, and beyond Voc. ...more

SL series electronic loads offer the best value with the most flexible platform. A wide range of loads are available from 75-1800W with both DC and AC input in benchtop, modular, stack and standalone form factors. ...more

As a power supply for testing vehicle electrical and electronic components/motor/solenoid/large capacitors and as electronic load for testing power supplies / batteries..... Can be used for various applications. ...more

3330A series Dual Load Module has two Electronic Load, which are used with the 3302C and 3300C Mainframes, but can't used with the 3302 mainframe. Each 3330A Series Module has its own control and display panel, CC/CR/CV/Dynamic modes, 150 Store/Recall and last setting memory which provides load set-up more efficiently.  ...more

Programmable DC Power Supply. DC Power Supplies R&S NGSM are versatile supply and measuring units for testing electronic car components by simulating real operating conditions. In addition to a wide field of car electronics, it can be used in mobile radio, car hifi applications and mechanical engineering.  ...more