|Sponsor Your Catalog|
D2K-DASK/X - Linux Driver API for ADLINK DAQ-2000 and PXI-2000 series Linux is a highly customized operating system. The drivers can be varied while applying to different Linux kernels or different hardware platforms. Currently ADLINK supports and maintains the driver for the following Linux distribution on the 32-bit, x86 single-processor platforms. * Driver API for Linux * Linux ELF shared library * Provide full functionalities of DAQ-2000 and PXI-2000 series
DAQPilot - Task-oriented DAQ Driver and SDK DAQPilot is ADLINK new generation DAQ driver and SDK for full-line DAQ products. ADLINK's DAQPilot provides task-oriented SDK for API, ActiveX controls, and .NET assembly. For LabVIEW users, DAQPilot supports Express VI and Polymorphic VI libraries. Programmers can interactively configure ADLINK DAQ products through DAQPilot Express VI and Polymorphic VI libraries.
NI DAQ Driver Software Robust, easy-to-use NI-DAQ driver software
ACLS-LVIEW - LabVIEW™ DLL Driver for ADLINK ISA-bus Data Acquisition Cards ACLS-LVIEW is the LabVIEW™ driver for ADLINK NuDAQ ISAbus data acquisition cards. For National Instruments LabVIEW™ users, ACLS-LVIEW provides a full set of VIs that operate with NuDAQ ISA-bus data acquisition cards and lets the users make full use of the capabilities of NuDAQ cards.(LabVIEW™ )
D2K-LVIEW - LabVIEW™ DLL Driver for ADLINK DAQ/DAQe/PXI-2000 Series Cards D2K -LVIEW is the LabVIEW™ driver for ADLINK DAQ-2000 series data acquisition cards. For National Instruments LabVIEW™ users, D2KLVIEW provides a full set of VIs that operate with DAQ-2000 series data acquisition cards and lets the users make full use of the advanced functionalities of DAQ-2000 cards, such as simultaneous AI,sophisticated gain-queue setting, arbitrary waveform generation and so on.(LabVIEW™ )
ACLS-DLL2 - Windows DLL Driver For NuDAQ ISA-bus Data Acquisition Cards The ACLS-DLL2 software is a standard Windows DLL. These driver APIs can be used with any Windows programming language that supports DLLs, including Microsoft Visual C/C++, Visual Basic,Borland C++, and Delphi etc. A complete set of sample programs for Microsoft Visual C/C++ and Visual Basic clarify the usage of each provided function.
D2K-DASK - Windows Driver API for ADLINK DAQ/DAQe/PXI-2000 Series Cards ADLINK D2K-DASK is an advanced 32-/64-bit kernel driver and 32-bit DLL Library for custom data acquisition application development. D2K-DASK provides a common set of Application Programming Interface (API) for ADLINK's extensive family of DAQ/DAQe/PXI-2000 series data acquisition cards, and is ideal for custom applications development under Microsoft Windows 98/NT/2000/XP/Server 2003/Vista.
NI-DAQmx - Driver and Measurement Services Software Driver and Measurement Services Software - high-performance, multithreaded driver for Windows at the heart of NI measurement services software. Additional measurement services include Measurement & Automation Explorer (MAX), DAQ Assistant, and VI Logger Lite.
NI Traditional NI-DAQ Legacy data acquisition driver software - suggested when devices are not supported by NI-DAQmx driver software.
NI-DAQmx Base Software extends a subset of NI-DAQmx functionality to Linux, Mac OS X, and Pocket PC users. Driver software for many popular NI data acquisition devices, including M Series
4807 - GPIB Data Acquisition & Control Board GPIB Data Acquisition and Control Board with 4 Analog Outputs, 6 Analog Inputs, 32 Digital I/O, 6 Relay Drivers, and 4 Thermocouple Inputs
PCM-3725 - DAQ 8-ch Relay and Isolated Digital Input PC/104 Module * 8-ch relay actuators output
* Opto-isolated 8-ch digital input
* LED indicators to show activated relays
* Onboard relay driver circuits
* Onboard input signal conditioning circuits
T24-SO - Wireless Telemetry Printer and Display Driver This module generates a radio telemetry serial output ASCII string which can include data from up to 8 x T24 acquisition modules as well as optionally sum them. The output is suitable for connecting to many serial input devices that require simple ASCII data.
NI PCI-1200 - Legacy DAQ Board for PCI 2 analog outputs, 24 digital I/O lines Three 16-bit, 8 MHz counter/timers NI-DAQ driver software, Version 6.9.3 or earlier 12-bit, 100 kS/s, 8 analog inputs
NI PCI-6527 - 24 Input, 24 Output Ch-Ch Isolated Digital I/O 24 optically isolated inputs; 24 digital switch outputs 0 to 28 VDC input range, switch currents up to 120 mA Protects system from noise and spikes NI-DAQ driver software
NI PXIe-6341 - X Series Data Acquisition NI X Series multifunction data acquisition (DAQ) devices provide a new level of performance with the high-throughput PCI Express bus, NI-STC3 timing and synchronization technology, and multicore-optimized driver and application software.
ES-3000 - Low-Cost Seismograph If you are a geoscientist doing teaching or research, or just need an exploration seismograph to find bedrock, the ES-3000 is for you. The system includes ESOS data acquisition software and the ES-3000 seismodule connects directly to your PC via the Ethernet port – no additional hardware or drivers are required.
2307 - Serial Data Acquisition & Control Board Serial Data Acquisition and Control Board. Provides Analog I/O, Digital I/O, Relay Driver Outputs and Temperature Measurements. RS-232, RS-422 and RS-485 Serial I/O includes network address and network packet modes.
2367 - Serial Data Acquisition & Control Interface Serial Data Acquisition and Control Minibox. Provides Analog I/O, Digital I/O, Relay Driver Outputs and Temperature Measurements. RS-232 and RS-485 Serial interface provides GPIB functionality over a serial link.
PCIS-DASK/X - Linux Driver API for NuDAQ PCI/cPCI series ADLINK PCIS-DASK/X is the device drivers for custom data acquisition applications under Linux environment. PCIS-DASK/X provides a common Application Programming Interfaces (APIs) for ADLINK??s extensive family of NuDAQ PCI/cPCI series data acquisition cards under Linux environment. With PCIS-DASK/X, you can easily access all of functionalities of ADLINK NuDAQ PCI/cPCI series data acquisition cards and get the best performance.
PCIS-DASK - Windows Driver API ADLINK PCIS-DASK is an advanced 32-/64-bit kernel driver and 32-bit DLL Library for custom data acquisition application development. PCIS-DASK provides a common set of Application Programming Interface (API) for ADLINK's extensive family of PCI/PCI Express(R)/cPCI Series Data Acquisition Cards, and is ideal for custom applications development under Microsoft Windows 98/NT/2000/XP/Server 2003/Vista.
NI Driver Software for Digital I/O National Instruments includes the robust, easy-to-use NI-DAQ driver software with its digital I/O and other DAQ device. It tightly integrates the full functionality of your digital I/O hardware to LabVIEW, Measurement Studio, C/C++, and Visual Basic. NI-DAQ implements a variety of digital I/O operations. High-performance features include multidevice synchronization, networked measurements, and DMA data management. Bundled with NI-DAQ, the Measurement & Automation Explorer utility simplifies hardware configuration with device test panels, interactive measurements, and scaled I/O channels.
USB-4671 - DAQ GPIB USB Module USB-4671 is a high-performance USB Module with a GPIB interface. The module is fully compatible with IEEE 488.1 and 488.2 standards with USB 2.0 bus specification. With two driver control modes: controller mode and slave mode; USB-4671 can perform basic the IEEE 488 talker, listener and controller functions required by IEEE 488.2.
4CYPDISO 8 - PC/104 Digital I/O Module All the functionality and cost effectiveness of the CYDAS data acquisition family is available in compact PC/104 format. Our 4CYDAS Series modules are compatible with the same data acquisition software as our CYDAS Series, including popular programs such as Labtech NOTEBOOK and the Universal Driver Library (CYDAS UDR). Pin-for-pin connector compatibility means that field wiring for these modules is identical to similar ISA-bus boards (with use of adapter cables).
Results 1 - 24 of 72
Drivers - translate general instructions into hardware specfic commands.
- Data Acquisition x
- .NET (22)
- Analog (38)
- Analog Digital (26)
- Analog I/O (32)
- Analog Input (26)
- Calibration (14)
- Counters (27)
- Data (32)
- Data Acquisition Software (20)
- Digital (27)
- Digital I/O (39)
- I/O (44)
- LabVIEW (30)
- Line (31)
- Measurement (20)
- Multifunction DAQ (25)
- Multifunction I/O (22)
- Services (18)
- Signal (22)
- Software (43)
- »See All 190 Features