Data Analyzers

The TRAU Analyzer is used to view and analyze TRAU frames at the Abis interface (between the BTS and the BSC). The Transcoder/Rate adaptor unit (TRAU) may be positioned at the MSC site of the BSS or at the BSC site of the BSS. ...more

GL's Facility Data Link Analyzer performs FDL decode and analysis on T1 channels in both real time and off-line using saved files with high level data link (HDLC) frames and bit-patterned extended super frame (ESF) data link messages. The real-time mode of operation is used to capture streams of HDLC frames on the selected cards and also embed ...more

GAO2028 Datacom Analyzer is a low-cost handheld instrument. It is widely used to identify and verify quality-of-service of datacom (V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A) transmission channels in Access Network, Transmission Network, Digital Data Network (DDN) and some private communication networks. It is intended to me ...more

True analysis of an ascynchronous serial link. Serial link passes straight through base unit without retransmission distortion or delay. Captures and stores full duplex data from DTE and DCE ports. Measures serial transceiver voltages to indicate line driver problems. Captured data is stored with precise time-tags, error status, and handshake lines ...more

GL's Frame Relay Protocol Analyzer can be used to analyze and decode frames conforming to Q.921, Q.922, LAPF, Frame Relay Forum standard -FRF.9 and FRF.12, Multiple Protocol Encapsulation, LCP RFC1661, Q.933 SVC and LMI SNAP, PPP, IP, SMTP, POP3 and so on. ...more

GLs new USB based T1 E1 Analyzer is the world's most powerful, full featured, and complete BERT, voiceband, data, signaling, and protocol analyzer on the market. It can perform analysis and emulation of various signal types including voice, digits, and tones; various protocols including HDLC, ISDN, SS7, CAS, Frame Relay, GSM, GPRS, CDMA, and U ...more

GL's HDLC protocol analyzer provides the capability to capture, and analyze HDLC data on a full duplex T1 or E1 line. The data channel may utilize all or a fractional part of the T1 or E1 line. ...more

TRAU (Transcoder/Rate Adapter Unit) frames carry voice traffic and control information in a GSM network. The GSM/TRAU Analyzer when connected to monitor points (as depicted above) permits monitoring of TRAU frames in GSM networks. TRAU carries speech, data, O&M frames at full rate or half (8/16 kbps) rate. ...more

Compact, battery operated device for analyzing AC/DC power loads — with PC interface plus datalogging. Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps. True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5. Plug device to be tested directly into the Power An ...more

Compact, battery operated device for analyzing AC/DC power loads — with PC interface plus datalogging. Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps. True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5. Plug device to be tested directly into the Power An ...more

The inTELLECT EXP marks the next generation of handheld analyzers allowing you to diagnose every part of the electrical system, from the battery to the starter and alternator, more accurately and decisively than ever before. The platform combines the full functions of an advanced analyzer, digital multimeter, and data management tool all in the ...more

TWith the Medusa Research Power Analyzer Pro there is no more guessing as to the performance of your model. It measures nine different parameters real-time including voltage, current, power, amp-hours, watt-hours, RPM, two different temperatures, and thrust as well as the capability to control your ESC. The PowerProView software through the USB int ...more

Single or three-phase measurements. True RMS. Data logging (1 MB memory). Auto ranging. Min/max/avg. Energy and Harmonics. PowerVision Software. Optional programs  ...more

Made for the professional technician,the 3184 tests batteries and starting/ charging systems faster than ever before. The BCS System Analyzer has an operating range of 50-2000 CCA ?s and is able to store data in memory or remotely print out the results using an infrared printer interface.It also measures voltage and tests starting and charging ...more

Accurately Measures Load V, I and Phase Angle for RF plasma optimization Utilizes Advanced DSP Technology for Real Time, User Programmable Data Acquisition Wide Frequency Range No Dedicated PC Required for Data Gathering and Control, Minimal Insertion Loss ...more

Having the excellent functions of the well-received LCA-LU4, LCA-LU4A has achieved automatization processing. A single analyzer can measure the cell thickness, twist angle, pretilt angle and anchoring energy of the transmissive LC-Cell. Two dimensional distribution measurement is simultaneously possible for the cell thickness and twist angle. A lar ...more

Instantly jump to any stream location with fast seeking which makes navigation simple and easy. MSight Analyzer will jump to the exact location of any error identified in a compliance test to allow full inspection of all the stream data at that location. Complete coverage with support for VC-1, H.264/AVC, MPEG-4 part 2, MPEG-2, MPEG-1, and system l ...more

The Candela 5100 system combines five independent detection methods: scatterometry, reflectometry, ellipsometry, optical profilometry, and Kerr effect microscopy in a compact, cost-effective system. Its measurements are well-suited for a variety of production monitoring, process development, and surface analysis applications. The OSA system sc ...more

EMCAT PRO 2005software provides Total Motor System Maintenance and Management for your organization whether you are a service company or an in-house maintenance department. EMCAT PRO 2005 integrates seamlessly with the ALL-TEST IV Pro 2000 Motor Circuit Analyzer and data collector to create a complete PdM tool incorporating route, work order manage ...more

Harris' Videotek® HD-STAR portable, battery powered, handheld HD-SDI & SD-SDI video and embedded audio generator and video and audio monitor provides multi-format functionality and versatility that set it apart from other handheld test and measurement products on the market. With a powerful array of features and functions that include a Video Test ...more

16-Channel Memory Data Recorder / Analyzer ...more

The most advanced system of the RWA 2000 series created to meet technological challenges of the new millenium. With 2004 model you can achieve 4Gbit/sec maximum data rate and have 2GHz analog bandwidth for all parametric measurements! ...more

The CIC429 is a full featured, high performance Serial bus Simulator Analyzer Tester developed by Andor Design for test and simulation of ARINC 429 or similar Avionic buses. The CIC429 is designed as a 5/8 size plug-in card for an ISA bus. An on board microprocessor off loads the host by organizing the data in a predefined structure in the dua ...more

RT Pro software for LDS-Dactron Dynamic Signal Analyzers offers powerful data acquisition and real-time signal processing capabilities for the range of noise and vibration testing – spectrum and FFT analysis, modal data acquisition, order tracking, waterfall analysis, waveform recording, octave band analysis, and transient capture with SRS analysis ...more

The Annie-USB is an 8-channel PC-based logic analyzer with probably the highest specifications in its class. It can capture data at a maximum rate of 500MHz and has a buffer depth of up to 1 Mega-samples per channel. ...more