DC Electronic Loads

The model 8500 is an affordable full-featured Programmable Electronic DC Load with a high degree of accuracy and great display resolution. They are great units for DC Power Supply and DC-DC Converter testing and calibration. Because the are fully programmable via the RS 232 or optional USB interface they are ideal for Automated Test Systems ...more

The model 8510 is a cost effective Programmable Electronic DC Load with a high degree of accuracy, great display resolution and a wide operating range of up to 120A or 120V, 600W max. The 8510 is well suited for testing and calibrating DC Power supplies, DC-DC Converters and batteries. Programmability via the RS 232 or optional USB interface m ...more

3335A (+500W) & (+50W) Dual Load Module has two Electronic Load, which are used with the 3300C and 3300A Mainframes, but can be used with the 3302 mainframe. Each 3335A Module has its own control and display panel, CC/CR/CV/Dynamic modes, 150 Store/Recall and last setting memory on 3300C mainframe which provides load set-up more efficientl ...more

As a power supply for testing vehicle electrical and electronic components/motor/solenoid/large capacitors and as electronic load for testing power supplies / batteries..... Can be used for various applications. ...more

3256,3257 is a 300V high Power AC and DC Load in one unit, it provides an ideal testing solution for UPS, AVR, Battery, Power Transformer, etc. 3256E is a high power version of 3256, where 3256 and 3257 are suitable for 115/230V .  ...more

The ELP/SLM Series of electronic DC loads can be operated in the following modes: Constant Current. Constant Resistance., Constant Voltage. Constant Power. For extra safety and comfort, the current and resistance values can be preset while in stand by mode before applying. The preset values are monitored on two 3-1/2 digit displays for voltage, ...more

AMREL's PLA Series of Water-Cooled Electronic Loads are designed for virtually all types of DC electronic Testing where either a static or dynamic loading is required. This load features 5 operating modes: Constant Current, Constant Voltage, Constant Resistance andConstant Power). Dynamic load profiling is achieved via it built-in pulse genera ...more

AMREL's PLA Series of Air-Cooled Electronic Loads are designed for virtually all types of DC electronic Testing where either a static or dynamic loading is required. This load features 5 operating modes: Constant Current, Constant Voltage, Constant Resistance andConstant Power). Dynamic load profiling is achieved via it built-in pulse generato ...more

Today's electronic products depend on the use of batteries ; either for wireless operation or for backup. Battery life and performance are key aspects of overall product performance, so incorporating the right battery into your product design is an important consideration. Percept's Battery Testing includes: Battery Life Cycle Performance Tes ...more

A solid oxide fuel cell (SOFC) test system. Custom designed to meet your SOFC testing requirements. Maximum Power: 150W-5KW. Variable electronic load options: Full software control; Constant DC power up to 150W; Constant voltage and constant current end power. ...more

The 3250 series AC&DC Load Module in the first on the market, providing an ideal testing solution for Power Transformers and other AC/DC sources. The 3250 series Module can be used with 3302 and 3300A Mainframes.These modules can be used in any configuration with 3310 series. Please refer to 3300 series Mainframe for more details. The 3 ...more

3254 , 3255 is a 500V high voltage AC and DC Load in one unit, it provides an ideal testing solution for Power Factor Correction, Power Transformer and other AC/DC source.  ...more

The As-513 can be used as an electronic load device for load testing AC power supplies and power equipment (instead of resistors, inductors, capacitors, or dummy network). ...more

PROGRAMMABLE POWER SUPPLY TEST SYSTEM. The BRAT Option B507 is an option to the BRAT Test System utilizing Commercial-Off-The-Shelf (COTS) equipment. The system is used to augment the existing BRAT capabilities to test power supplies.  ...more

The High Power AC Load is a 300V high power AC load, it provides an ideal testing Solution for UPS, AVR, Battery, Power transformer, etc. The five states Memory and GO/NG check function is suitable for Production and Quality Control. ...more

The microprocessor controlled loads of the series EA-EL 3000 (400W) and EA-EL 9000 (2400W - 7200W) accomplish nearly all requirements in modern load concepts for industrial and R&D areas. The four common regulation modes constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR) can be used in any combina ...more

SL series electronic loads offer the best value with the most flexible platform. A wide range of loads are available from 75-1800W with both DC and AC input in benchtop, modular, stack and standalone form factors. ...more

3505/3510 is an ideal testing Solution for High Power DC Power source, such as SMPS, Battery. Each 3505/3510 has its own control and display panel, The five states Memory function are suitable for Production and Quality Control. The high power load system is configured by parallel connection of one master load unit and 3/7 slave load unit. R ...more

Programmable DC Power Supply. DC Power Supplies R&S NGSM are versatile supply and measuring units for testing electronic car components by simulating real operating conditions. In addition to a wide field of car electronics, it can be used in mobile radio, car hifi applications and mechanical engineering.  ...more

3320 series module are used with the 3302 and 3301 Mainframes. Please refer to 3300 series Mainframe section for details. Each 3320 series module has its own control and display panel with constant current operating mode. Optional Vsense Control Switches and disable SHORT keys are available.  ...more

3310D series Module are used with the 3302C single mainframe and 3300C 4ch Mainframes.Each 3310D Series Module has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 Store/Recall memory which provides load set-up more efficiently.  ...more

3310C series Module are used with the 3302 and 3300A Mainframes. Please refer to the 3300 series Mainframe section for details. Each 3310C Series Module has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 ...more

AMREL's PLA Series of Air-Cooled Electronic Loads are designed for virtually all types of DC electronic Testing where either a static or dynamic loading is required. This load is the 1st of its kind to come in a 1U-High Form Factor. It features 5 operating modes: Constant Current, Constant Voltage, Constant Resistance andConstant Power). Dynam ...more

1 DC-Module, linear controlled, programmable in current and voltage, 0-80 V in several ranges, 0-30 V, max. 14 A, 30-65 V, max. 7 A, 65-80 V, max. 4 A, 2 load modules, 2 programmable current ranges 0-30 A, 10 mA resolution, 0-3 A, 1 mA resolution, max. 400 VA to 50 V, 200 VA from 50 to 100 V, total output up to 1,000 W, ramp and curve forms ca ...more

2 DC-Modules, linear controlled, programmable in current and voltage, 0-80 V in several ranges, 0-30 V, max. 14 A, 30-65 V, max. 3.5 A, 65-80 V, max. 2.5 A, 1 load module, 2 programmable current ranges 0-30 A, 10 mA resolution, 0-3 A, 1 mA resolution, max. 400 VA to 50 V, 200 VA from 50 to 100 V, total output up to 800 W, ramp and curve forms ...more