Crystal Oscillators

The QCM200 Quartz Crystal Microbalance measures mass and viscosity in processes occurring at or near surfaces, or within thin films. This system includes a controller, crystal oscillator electronics, crystal holder, three quartz crystals, and Windows / Mac software. ...more

The frequency standards from Pendulum suit the highest demands for stability. All frequency standards offer multiple buffered outputs (5x or 10x outputs of 10 MHz sine). Choose from the low-cost 6688 based on a very-high-stability oven-controlled SC-cut crystal oscillator or the 6689 with a built-in Rubidium atomic clock.  ...more

The DDS5m Lockable Digital Synthesizer Module is a Precision 40 MHz Signal Source on a small circuit board. The DDS5m can be locked to an external frequency standard to provide accuracy and stability equal to the standard. It provides both Sine and Clock outputs from 100 Hz to 40 MHz in 0.025 Hz steps. The RS232 serial interface makes it easy ...more

Wide frequency output by PLL technology.Quick delivery of samples and short lead mass production time. Excellent environmental capability. Output enable function (OE) and stand-by function (ST) can be used for low current consumption applications. Pin compatible with ceramic package crystal oscillator (7 x 5) ...more

The QCM100 is a low cost quartz crystal microbalance system designed for real-time mass and viscosity measurements in processes occurring at or near surfaces, or within thin films. It comes with controller, oscillator electronics, crystal holder, and three quartz crystals.  ...more

The Passive Maser principle of operation is based on a 5 MHz quartz crystal oscillator, frequency locked to the hyperfine transition of the hydrogen atom. The Passive Maser is specifically designed to provide an alternative technology to the high performance option cesium oscillators - the Maser's stability specification is at least a factor of ...more

The SC10 is a high stability ovenized 10 MHz quartz oscillator that combines excellent phase noise, Allan variance, and aging characteristics. Using an SC-cut crystal for lowest phase noise characteristics, and an innovative "electronic double oven" temperature controller to minimize temperature gradients, the SC10 achieves a one sec ...more

The PRS10 is an ultra-low phase noise 10 MHz frequency standard that disciplines a crystal oscillator to a hyperfine transition in the ground state of rubidium. The device fulfills a variety of communication, synchronization, and instrumentation requirements. The phase noise of the 10 MHz output is low enough to be used as the reference source ...more

TA-120 is a universal AC Power Supply. It can be used as a Power Amplifier.  A built-in crystal controlled oscillator for 50, 60 or 400Hz, switchable.  Constant voltage or current mode, selectable   Can also beusede as DC amplifer ...more

The DDS6m Direct Digital Synthesizer Module is a Precision 40 MHz Signal Source on a small (2.5" x 3.5") circuit board. It provides both Sine and Clock outputs from 100 Hz to 40 MHz in 0.025 Hz steps. The RS232 serial interface makes it easy to set the output frequency and save the settings in EEPROM memory. It has excellent spectral ...more

The PRS10 is an ultra-low phase noise, 10 MHz rubidium-disciplined crystal oscillator. The device fulfills a variety of communication, synchronization and instrumentation requirements. ...more

The frequency standards from Pendulum suit the highest demands for stability. All frequency standards offer multiple buffered outputs (5x or 10x outputs of 10 MHz sine). Choose from the low-cost 6688 based on a very-high-stability oven-controlled SC-cut crystal oscillator or the 6689 with a built-in Rubidium atomic clock. ...more

Traditional ovenized crystal oscillators typically require long warm-up times to stabilize before a usesable frequency output is obtained. Frequency Electronics experience in hybrid technology has led to the development of a stable oven controlled oscillator without the normally long waiting time. ...more

The RFS uses the property of atomic resonance in a Rubidium Physics Package to control the output frequency of a 50.255+ MHz Voltage Controlled Crystal Oscillator (VCXO) via a Frequency Lock Loop (FLL). The FLL functional blocks consist of an RF Generator, Lock-in Amplifier and the Rubidium Physics Package. Frequency locking of the VCXO is accompli ...more

Aeroflex brings high performance phase noise testing capability into a new era with the PN8000, a low cost automated phase noise test system. The PN8000 is designed for manufacturers of crystal oscillators, synthesizers and PLL (phase lock loop) components who do not need the additional performance of the options available in the PN9000 or PN9 ...more

Traditional ovenized crystal oscillators typically require long warm-up times to stabilize. Frequency Electronics’ experience has led to the development of a stable oven controlled oscillator which warms up in less than 2 minutes to 1x 10-7. The FE-101A is a rugged, compact, ultra-stable, sub-miniature crystal oscillator designed to provide excelle ...more

This new design concept features a precision double oven crystal oscillator capable of analog or digital tuning. The serial digital tuning is ideal for disciplined applications in today’s telecommunications industry where holdover is important. ...more

The Model 3711-B by King Nutronics Corporation is a compact, self-contained, and portable tachometer test set designed specifically for troubleshooting and calibrating aircraft and helicopter tachometer indicators and generator/alternator systems on the flight line or in the workshop. Designed around a precision stepper motor, which is synchro ...more

The LG 3236 Synthesized Signal Generator covers a frequency range from 100 kHz to 170 MHz and provides AM and FM stereo modulation capability. A high accuracy crystal controlled reference oscillator, 5 ppm, ensures accurate and stable RF carrier frequency output. ...more

This new design concept features a precision double oven crystal oscillator capable of analog or digital tuning. The serial digital tuning is ideal for disciplined applications in today’s telecommunications industry where holdover is important. The temperature coefficient of this device is less than 1x10-10. This is accomplished with no over or und ...more

The CX74063 transceiver is a highly integrated device for multi-band GSM/GPRS applications. The device requires a minimal number of external components to complete a GSM radio subsystem. The CX74063 supports GSM850, EGSM900, DCS1800, and PCS1900 applications. The receiver also supports downlink EDGE applications. The receive path implements a ...more

Frequency Response Detector. Quartz crystal stabilized internal oscillator Synchronous oscillator output for input offset reduction ...more

This new design concept features a precision double oven crystal oscillator capable of analog or digital tuning. The serial digital tuning is ideal for disciplined applications in today’s telecommunications industry where holdover is important. The temperature coefficient of this device is less than 1x10-10. This is accomplished with no over or und ...more

The Multi Clock Divider Board (MCD) Clock provides a one board solution, capable of accepting a wide frequency bandwidth, for the testing of signal generating devices such as crystals and oscillators ...more

The Agilent Technologies E5500 Series of phase noise measurement solutions offers the most flexible set of measurements on one-port VCOs, DROs, crystal oscillators and synthesizers. Two-port devices, including amplifiers and converters, plus CW, pulsed and spurious signals can also be measured. The E5500 measurements include absolute and residual p ...more