Communication Protocols

The smartCAR provides a portable communication interface for the Automotive industry. The smartCAR connects to the computer via USB2.0 (high speed mode). One of the significant feature?s of the universal and modular hardware interface is its scalable functionality. Options include transport protocols, diagnosis and restbus simulation (executed ...more

The NIC is a scalable solution for verifying and qualifying the performance of today's multiprotocol global communications networks.With a flexible software/firmware-based architecture, the scalable NIC Plus combines in a single platform the multitude of traditional hardware-based test sets required to install, maintain, and monitor high-speed ...more

The M367 is an intelligent serial channel protocol controller based upon the MC68EN360 Quad Integrated Communications Controller (QUICC?). It has been designed to support high data transfer rates with a minimum impact on system loading. ...more

The ASE PC104 cards are multi-function I/O boards supporting bit and byte, asynchronous and synchronous, serial (RS232 and RS485) communications. Besides being one of the few multi-channel PC104 I/O cards that include support for bit oriented protocols, ASE has added several features which help provide a complete solution to many communication ...more

Applied Systems Engineering, Inc.'s SPT4-NET is a Protocol Translator and Data Concentrator product with one network channel, four serial channels, and a large software library of RTU/IED communication protocols. It provides cost-effective support for a wide array of protocol and data transport applications common in the SCADA industry. These ...more

The ASE2000 RTU Test Set is a full-featured protocol test unit that provides the user with a powerful and flexible tool for testing and maintaining SCADA RTU and SCADA IED equipment and diagnosing communication problems. ...more

The VDEW protocol test system is for the protection engineer to test and to verify the proper coordination of the protection functions and the messages issued on the communication link. For relay testing with simultaneous protocol monitoring. ...more

NPORT 4511 is a professional Programmable Communication Gateway that makes your RS-232/422/485 devices network-ready, and its programmable nature makes it a value-added developing platform suitable for real-time I/O control and protocol conversion applications ...more

NanoTronix LAN Cable Tester Plus (Model No.: mTDR-030) is a combination unit that utilizes MTDR(Metallic Time-Domain Reflectometry) technology used in measuring cable distance and TCP/IP protocol analyzer for examining internal conditions of LAN communication lines ...more

NPORT 4511 is a professional Programmable Communication Gateway that makes your RS-232/422/485 devices network-ready, and its programmable nature makes it a value-added developing platform suitable for real-time I/O control and protocol conversion applications. NPORT 4511 is a flexible, reliable, cost-effective, and customizable solution that gives ...more

The ADAM-4000 series modules use the RS-485 communication protocol, the industry's most widely used bi-directional, balanced transmission line standard.  ...more

The BIG Displays are easy to configure and scale to virtually any engineering units with the push buttons on the front panel, or with a personal computer using the free configuration software and the optional Ethernet connectivity or Serial Communications. The Ethernet option allows the device to be connected on a standard Ethernet network and comm ...more

The buscheck PROFIBUS Protocol Analyzer is an indispensable tool for analyzing and optimizing communication in PROFIBUS networks. It is ideally suited for continuously monitoring a network, detecting hidden errors early on, optimizing data throughput and analyzing configuration errors. ...more

The STX 2100 Series Differential Pressure Transmitter complements the STX 2000 Series, providing a complete family of Smart gauge, absolute and differential units. Featuring a unique floating sensor design and state-of-the-art electronics incorporating the HART protocol, the STX 2100 Series provides enhanced performance and digital two-way com ...more

Thermocouple signal conditioner/ transmitter. The iDRX-TC is a digital signal conditioner which communicates over an RS-485 communication link using either a simple, straightforward NEWPORT ASCII Serial Protocol or MODBUS Serial Protocol. Up to 32 modules may be connected to a single RS-485 port stretching up to 4,000 ft. without repeaters. ...more

Strain gauge / bridge transducer signal conditioner. The iDRX-ST is a digital signal conditioner which communicates over RS-485 communication link using either a simple NEWPORT ASCII Protocol or MODBUS Protocol. Up to 32 modules may be connected to a single RS-485 port stretching up to 4,000 feet without repeaters. ...more

1/32 DIN Meter. The i32 is the first 1/32 DIN controller offering 2 SPDT (Single Pole Double Throw) Form C relays, instead of the single throw relays on typical 1/32 DIN controllers. The i32 is the first to offer both RS-232 and RS-422/485 serial communications in one instrument (C24 option). Both ASCII protocol and modbus protocol are selectable f ...more

Capabilities include single-phase and three-phase models from 65 to 250 amps. Field configurable phase angle or zero-cross firing improves application flexibility on site where you need it. 50/60Hz independent operation means you can operate almost everywhere in the world without special calibration considerations. Serial communications utilizing M ...more

The PCI-1553-DDC-1/2 implements a complete single channel dual-redundant MIL-STD-1553 bus terminal on a half size PCI Card. Full BC/MT/RT modes are supported. 0°C to 70°C operating temperature is standard. Included is an DDC Enhanced ACE intelligent communications protocol engine, dual transceivers and encoder / decoders, shared ...more

The CPCI-1553-DDC implements a complete single and dual channel, dual-redundant MIL-STD-1553 bus terminal on a 3U CompactPCI module. BC/MT/RT modes are supported. 0°C to 70°C operating temperature is standard. Included is an intelligent communications protocol engine, dual / quad transceivers and encoder / decoders, shared memory ...more

KTS 115 OBD-Module: The Ideal OBD Solution. Now available – the system tester for the complete on-board diagnosis (OBD) – the ideal technology for specific, targeted evaluation. Reads out OBD modes 1-9 (complete range of OBD-diagnosis functions). Supports all four communication protocols. ...more

This six-inch-long, single-port card can be used in ISA Bus computers. The card supports all of the popular communication protocols. RS-232 communication is fine for short distances and development work. ...more

The ProDAQ 3630 Function Card is a high speed, intelligent, four-channel serial interface card. It supports asynchronous based communication protocols, as well as isochronous transmission. The front-end drivers/receivers can be programmed to operate compliant to different serial standards independently for each channel.  ...more

The 260C is the latest generation of DOCSIS Protocol Analyzers from DAQTron. It demodulates and decodes DOCSIS 2.0 TDMA, A-TDMA and S-CDMA modulation formats. Additionally, it maintains backwards compatability with DOCSIS 1.0-based and 1.1-based protocols. The 260C captures DOCSIS communications to disk for analysis of DOCSIS protocol and applicat ...more

The CVM-BC3 family of DIN rail mountable, multi function power monitors offer industrial and commercial facilities a compact, cost effective and feature rich instrument that not only measures, calculates and displays all the main electrical parameters of any network (balanced or unbalanced) but also provides multiple options including configura ...more