Analog Inputs

Serial Data Acquisition and Control Board. Provides Analog I/O, Digital I/O, Relay Driver Outputs and Temperature Measurements. RS-232, RS-422 and RS-485 Serial I/O includes network address and network packet modes. ...more

The 6035 input module has eight channels of programmable transducer signal conditioning amplifiers and digitizer. Each channel has programmable voltage excitation, bridge completion and balance, programmable gain instrumentation amplifier, four-pole low pass filter and sample and hold amplifier. Channel outputs are multiplexed and digitized to ...more

The 6165 is a two-channel amplifier-filter module. Each channel has isolated input, 50 kHz bandwidth and two outputs that can be filtered or wideband. Bandwidth of 100 kHz is optional. The input is two-wire shielded and is isolated from the outputs, power and control interface. This gives the user complete freedom to ground the input without c ...more

The V450 is a VME 16-channel isolated analog-to-digital converter module which can acquire a wide range of DC voltages, including thermocouple temperatures. Each channel is independent with an isolated DC power supply, optoisolated interface, A/D converter, signal conditioning, input protection circuits, and test relay. An internal microproces ...more

The PX466S provides distribution of clock signals to other devices. The module accepts three analog input signals and provides TTL and ECL distribution. The input signals are passed through high speed comparators that convert the analog level to a digital signal. The digital signals are individually buffered to provide the TTL and ECL outputs. Inte ...more

The C387 is a single-width, 6U, CompactPCI module with up to 256 digital input/output channels. The C387 base board supports 128 channels of TTL I/O. Four mezzanine card sites can be populated with other forms of digital I/O including isolated input, isolated output, relay output, AC switch output or differential I/O. The mezzanine card concep ...more

Designed for rack-mount and production applications, the ATS-1 offers the same measurement functionality and ease of use as an equivalent Portable One, but is housed in a fan-cooled metal case, designed for front or rear modular connector placement and rack mounting. The ATS-1 Plus Access includes comprehensive analog generation and measuremen ...more

The AD3000 is a Xilinx Virtex-5 FPGA closely coupled to a high-speed analog input front end providing both processing and acquisition in a single XMC/PMC card. A Virtex-5 SXT or LXT FPGA is used to control the analog to digital converter and provides the off-board digital interfaces of PCI-X and the multi-Gbit serial I/O used for the XMC inter ...more

The 464kA is a reliable solid-state switch matrix system that provides computer controlled analog signal switching between 256 inputs and 256 outputs, all in a single mainframe. Save time and reduce errors on test system setup. Download switch configurations from the host computer over the network. Built-in self-test with fault diagnostics. ...more

GPIB Data Acquisition and Control Board with 4 Analog Outputs, 6 Analog Inputs, 32 Digital I/O, 6 Relay Drivers, and 4 Thermocouple Inputs ...more

These multifunction data acquisition cards are for use with notebook and other PCs equipped with a PCMCIA port. They are ideal for field applications such as in-vehicle test as well as for laboratory applications where space is at a premium or portability is required. ...more

A low cost 8 channel, 16-bit interface to any USB port. The USB-1608FS provides one A/D converter per channel, allowing all 8 channels to be sampled simultaneously.The USB-1608FS offers continuous single-channel sample rates up to 50 kilosamples/sec. Multiple-channel continuous sampling rates up to 100 kilosamples/sec total, where the maximum ...more

Sleek, modern design, USB-based DAQ module with 8 analog input channels, up to 12-bit resolution, 50 kS/s, two D/A outputs and 16 DIO bits, in an attractive miniature case, with signals brought out to screw terminals. The USB-1208FS sets a new standard for low-cost, PC-based analog and digital I/O. Providing 8 single-ended inputs with 11-bit r ...more

USB-based DAQ module with 8 analog input channels, up to 12-bit resolution, 1.2 kS/s, two D/A outputs and 16 DIO bits, in an attractive miniature case, with signals brought out to screw terminals. Winner of Desktop Engineering's Readers' Choice Award. The USB-1208LS from Measurement Computing adds a low cost analog and digital I/O interface to ...more

Delayed Sweep & Dual Trace. Analog Oscilloscopes. 1mV/DIV Sensitivity. Sweep to 2ns/DIV. Z Axis Input. Single Sweep. Dust Cover Included. 2 Free x1, x10 Probes ...more

USB DAQ device with 8 12-bit analog inputs, 2 analog outputs, 20 digital I/O, and a 32-bit counter. ...more

For both analog and digital expansion, the DBK209 adapter board mates with the DaqBoard/2000 series via a 3-ft. CA-195 cable. The DBK209 provides three male DB37 connectors, divided into P1 analog input, P2 digital I/O, and P3 analog output and counter/timer I/O.  ...more

The DP95 is an RTD thermometer that combines high precision at an extremely competitive price. The DP95 features 0.001°C resolution with an accuracy of 0.05°C (0.09°F) over the entire temperature range of -200 to 850°C (-328 to 1562°F). It accepts up to four RTD probe inputs. Each of the four probes can be individually linearized based on either: e ...more

Oruga is an intelligent PCI data acquisition/playback card capable of capturing 64 analog input channels with 16-bit resolution at 66 kSamples/second each, and playing 4 analog output channels at up to 2MSamples/s, with advanced triggering options offering an amazing flexibility. ...more

The DBK207 and DBK207/CJC accept up to 16 isolated analog input modules of any type. Modules can be mixed in any combination to measure temperature, strain, volts, current, and frequency. Up to sixteen DBK207 and/or DBK207/CJC boards can be daisy-chained supporting expansion to 256 isolated analog inputs ...more

The APCI-3002 is an analog input board for the PCI-bus. She offers two crucial advantages: The initialisation of a powerful trigger logic allows to acquire analog signals, which depend from time and way, via different  modes. Furthermore, the differential input guarantee the precise acquisition of these signals, although the sensors and p ...more

The DBK40 allows easy attachment of analog signals to a system using BNC cables. Features 18 BNC connectors. Provides access to 16 analog inputs  ...more

OMEGA DP2000 Digital Indicator/Controllers bring you a new world of versatility. A universal 1 /8 DIN case houses your choice from thousands of configurations. Choose any combination of Display Type (LED or LCD), Operating Power, Input Type and Range, Analog Output and Digital or Control Outputs. OMEGA will supply a fully burned-in and tested OMEG ...more

The D1000M series are similar to the D1000 series but use the Modbus RTU protocol for communication. The modules convert an analog input signal to engineering units and transmit in ASCII format to any host with standard RS-485 or RS-232 ports.  ...more

24 digital I/O lines, can be scanned synchronously or asynchronously with analog and frequency inputs. Two 16-bit, 100-kHz analog outputs with infinite continuous waveform output capability (model /1000 only) ...more