AC/DC Power Supplies

New digital LED meters, improving the resolution of the readings to 1%. Four separate power supplies, all insulated from each other and grounded: high voltage, bias voltage, filament supply, and Helmholtz coil supply. AC/DC, high voltage, and high current for versatility. Voltmeter selectable between 80V and 500V supplies. Electronic overload ...more

The Genesys(TM) family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with available output voltages from 7.5 to 600V, and current up to 1,000A. Active PFC, and universal i ...more

The GenesysTM family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with available output voltages from 7.5 to 600V, and current up to 1,000A. Active PFC, and universal input ...more

The Genesys(TM) family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Available in two power levels (750W or 1500W) and with available output voltages from 7.5 to 600V, and current up to 200A. Active PFC, and universal input head a long list of stan ...more

This member of the Genesys(TM) product family of programmable switching power supplies provides high power density, low ripple and a complete set of user-friendly interfaces. In addition to high power density, popular worldwide single and three phase inputs are available. This assures operation in difficult AC environments and meets European EM ...more

The Genesys family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in half rack configuration at 750W, designated GENH, and with available output voltages from 7.5 to 600V, and current up to 100A. Active PFC, and universal input head a ...more

The PWS1000 Series of power supplies provides 12, 24, or 48 Volts DC at 1000 Watts of continuous power from a 110 or 220 Volt AC source. Analytic Systems' power supplies use Switchmode technology with powerful IGBT switching transistors for reliability and efficiency with minimum size. Circuit innovations reduce output ripple to levels previou ...more

NAI offers a wide variety of COTS and Custom Power Supplies and DC/DC Converters, specifically designed for the rugged-Military and Commercial Aerospace markets. All of our AC/DC power supplies and DC/DC converters provide high power-density, low profile, high reliability, and rugged packaging. They are available in ratings from 15 watts throu ...more

Dynamic measuring ranges 1 to 1000V and 3mA to 30A directly. Harmonics and flicker measurement acc. to EN 61000-3-2 and EN 61000-3-3. Typical Applications: Measurements on 3 phase frequency inverters, AC/DC motors, electronic and conventional transformers, switching power supplies, lighting, efficiency of MW-transformers ...more

The 5478 is a digital multipurpose tester intended for testing, analyzing, inspecting and periodic maintaining of any high voltage insulations. This instrument offers a complete set of functions to measure and detect effectively all parts of current in an insulation system. The instrument can supply an output power of 5 W and a test voltage of ...more

General Purpose Inverters. AC/DC Variable Speed Drivers. Battery Supplied Applications. Uninterruptible Power Supplies (UPS). Switched Mode Power Supplies (SMPS) ...more

Measurements on switching power supplies, AC/DC motors and generators, electronic and conventional transformers, ballasts, PWM frequency inverters, ultra-sonic generators, ferromagnetic core losses, lighting, dielectric barrier discharge lamps, low and high pressure discharge lamps, calibration reference for power and energy. Harmonics and flicker ...more

3 & 1 Phase Multifunction Precision Power Meter (1000 V/30 A, Accuracy 0.2%)     (& matching AC/DC V/A supply source).  High Accuracy Multi-function Calibrator    (Temperature & Electrical Signal Calibration - 0.01% / 0.02% Reading Accuracy)  Function Generator (upto 20 MHz) ...more

Fully configured automatic power supply test system optimized for fast test speeds. The POWERTEST 535 is a fully configured, mid-range DC power supply test system. It is specifically targeted for cost-efficient testing of AC-DC and DC-DC supplies up to 1200W and 8 outputs. For example, the 535 is ideally suited for PC and ATX-type power supply ...more

The S400 Power Supply Tester is a PC-controlled, full-capability system intended for high-speed functional testing of low-power products such as DC-DC converters, VRMs, AC-DC supplies, adapters and chargers. All the measurement, control and test executive capability found in upright-cabinet-sized automatic power supply test equipment are conta ...more

The 5600 Series Power Supply Tester is a high performance power supply ATE platform that makes all critical measurements through a waveform digitizer. This allows more comprehensive measurements, higher test speeds, smaller cabinet/footprint size and ultimately, a simpler, more reliable power supply test system. The 5600 targets mid-to-large A ...more

Upto 2 Temperature Calibrators (Digital/Microprocessor based) - rack mounted     with integral / separate heating/cooling towers - Ranges upto 650°C.  Upto 2 Pressure Calibrators (Digital/Microprocessor based) - Pneumatic/Hydraulic - rack     mounted with integral / separate Hand Pumps - Ranges upto 70 ...more

2 or 3 mP based High Accuracy Dry Block Temperature Calibrators, Trolley mounted ready for use    (-40°C to 1200°C)  2 or 3 mP based Pressure Calibrator Modules (Accuracy upto 0.025% FS) / Pneumatic/Hydraulic -    Ranges Vacuum to 700 bar - rack mounted with integral/separate Hand Pumps with Verniers   ...more

The PFC4500 is a compact, modular AC/DC power supply with power factor corrected input. It uses established design techniques to deliver 4500W output power, or 3000W with N+1 redundancy. Standard output is 48VDC, and other output voltages are available. The PFC1500 hot-pluggable modules have built-in redundancy diodes, a feature which makes th ...more

Chroma Model 6310 series Economic DC Electronic Load is suitable for the test and evaluation of multi-output AC/DC power supply, DC/DC converter, charger and power electronic components and good for application in areas such as research and development, production, and incoming inspection.  ...more

The CM, P and PA Series boast over a decade of reliable, field proven service and are the recognized industry standard for high performance AC/DC power supplies. The PA Series is equipped with industry standard 2.2” pin spacing while the P Series is 2.0”. ...more

The MP Series boast over a decade of reliable, field proven service and are the recognized industry standard for high performance AC/DC power supplies. These economy priced triple output supplies are ideal for those applications where space (PC Board real estate) is limited. ...more

The CM, P and PA Series boast over a decade of reliable, field proven service and are the recognized industry standard for high performance AC/DC power supplies. The PA Series is equipped with industry standard 2.2” pin spacing while the P Series is 2.0”. ...more

Switching and IGBT technology high power supply from 10KW to 1200KW. ...more

The Scott G Series is a nest-housed type signal conditioners with AC/DC dual power supply, switch selectable output. The lineup includes pneumatic-electro transducers. ...more