Filter Results By:

Products

Applications

Manufacturers

Light

Visible spectrum of electromagnetic radiation from 400nm to 700nm.


Showing results 1156 - 1170 of 1919 products found.

  • Backup Power

    Xantrex Technology

    Xantrex backup power products are power generators that are quiet and safe for indoor use. These products provide standard household electricity to run a wide variety of electronic equipment and appliances (such as lights, radios, tools, televisions etc.) when electric utility power is not available. Ideal for weather emergencies, power outages and even outdoor activities such as camping on a nice, sunny day, Xantrex backup power products are available in different sizes and power ranges.

  • Basket Liner Testing Equipment

    TWM, WM Series - The Von Corp

    The TWM Series is The VON Corporation’s fully automated bucket liner/basket test solution. Units allow testing of all standard and double bucket liners. Test voltage and arc detection are all controlled electronically. Tests are timed and an audible alarm sounds failures or test complete, with bright flashing colored lights signaling which position failed or test complete.

  • Automatic Cutting Edge Measurement Device

    EdgeMaster - Alicona Imaging GmbH

    With the EdgeMaster you measure edges regardless of type, size, material or surface finish of the tool. The measurement system delivers fully automatic measurements and stable results even with external vibration and external light. It provides user-friendly operation with high measurement speed. High vertical resolution enables chipping measurement in addition to traceable roughness measurements at the rake face of edges. An intelligent illumination technology enables optimized illumination of surfaces with short exposure times, leading to fast measurements.

  • Atomic Emission Spectrometer

    QualiAES - Qualitest International Inc.

    The Atomic Emission Spectrometer - QualiAES is mainly used in the quantitative analysis of metallic element and partial non-metallic element in liquid sample (including the solid sample which can convert into a solution by chemical processing). The solution is placed into a plasma torch in the form of an aerosol. The sample will be evaporated and stimulated, and it will emit light with the characteristic wavelengths of its elements. Its spectral intensity is received by photoelectric element, converted to electrical signals and recorded by a beam-splitting by beam-splitting system.

  • Automated Conformal Coat Inspection

    FX-UV AOI - YesTech, Inc.

    Conformal coatings used by electronic manufacturers contain UV indicators for the purpose of inspection. Since coatings are transparent, units must be viewed under black light in order to verify coverage and non-coverage. The Nordson YESTECH FX-UV makes inspection of conformal coatings simple and convenient by automating the inspection process for quality, consistency and thickness of coatings under UV lighting with the use of proprietary inspection algorithms.

  • Automated Filter Tester

    3120 - TSI Inc.

    Automated Filter Tester 3120 meets NIOSH’s proposed Powered Air Purifying Respirator (PAPR) filter test requirements. It is an oil-only tester that has an airflow range of 100 to 200 L/min and can measure efficiencies up to 99.999%, or penetrations as low as 0.001%. In fact, Model 3120 uses the same proven oil-aerosol generator found in models 8127 and 8130. Like models 8127 and 8130, model 3120 features dual light scattering photometers that simultaneously measure upstream and downstream particle concentration to ensure fast, repeatable results.

  • Cable Burning Smoke Density Tester

    TF344 - TESTEX Testing Equipment Systems Ltd.

    Cable Burning Smoke Density Tester, to determine the smoke density of cables burning under defined conditions. This smoke density tester is used for horizontal burning of a cable or fiber optic cable, the smoke that is released from the flame combustion or no flame combustion condition, the light transmission rate of smoke can be used to compare different cable or judgment is in accordance with the specific requirements of the means.

  • Cable Core Identifier

    Bowden Bros Ltd.

    The Cable Core Identifier is designed to establish the phase rotation in an un-energised three phase H.V. Cable. Prior to jointing. This in expensive tool is very easy to use and effective, using three coloured LEDs to confirm correct connection. The Receiver is connected at the remote end, and continuity between phases is checked by changing the coloured crocodile connectors in accordance with the written instructions on the Transmitter.When all three LEDs light the phase connection is correct.

  • Cable Fault Distance Locator

    Electrocon Systems

    Adopts international advanced electronic testing technologies and SCM technology.Is suitable for the precise range finding of power cable high resistance, flashover, disconnection, and low resistance faults.English menu, easy to master and use.TDR and Impulse current mode.Automatically computes fault distance.It can preserve 20 testing waveforms permanently,no loss after the shutdown,is a replacement of printer.Rechargeable nickel-metal hydride Batteries.Small size, light weight, and portable design.

  • Brush or Sponge Pilling Tester

    TF222 - TESTEX Testing Equipment Systems Ltd.

    Brush or Sponge Pilling Tester, to determine the pilling propensity and simulate normal wear of knitted and woven fabrics used in apparel and automotive interiors by brush and/or sponging specimens together in a circular motion to form pills. Specimens are evaluated under standard lighting conditions using a pilliscope, light cabinet or similar, against users’ standard fabrics or piling photographs.

  • OZONE MONITOR

    727-3 - Mast Development

    Upon entering the instrument, the sample is diverted by the gas valve into the catalytic converter which selectively changes any ozone present to oxygen. This sample, with no ozone, then passes though the absorption chamber where the detector measures the amount of ultraviolet light transmitted through it. Upon completion of this cycle, the valve is activated and the sample containing ozone is passed through the absorption chamber. The absorption by ozone of the ultraviolet radiation at a wavelength of 254nm is measured at the sample detector, and displayed in parts-per-million (ppm) ozone.

  • OZONE MONITOR

    727-3A - Mast Development

    Upon entering the instrument, the sample is diverted by the gas valve into the catalytic converter which selectively changes any ozone present to oxygen. This sample, with no ozone, then passes though the absorption chamber where the detector measures the amount of ultraviolet light transmitted through it. Upon completion of this cycle, the valve is activated and the sample containing ozone is passed through the absorption chamber. The absorption by ozone of the ultraviolet radiation at a wavelength of 254nm is measured at the sample detector, and displayed in parts-per-million (ppm) ozone.

  • Panel Light-I-V Teste

    ASIV-11 - Greensolar Equipment Manufacturing Ltd.

    The Panel Light-I-V Tester (ASIV) is used to test photovoltaic panels or modules during their production. A flashlight illuminates the work piece with similar light spectrum to that of the Sun, while the electric performance of the unfinished panel or the finished module is accurately measured. With the help of the tester the user can filter out reject panels. Testing the final performance reveals changes made by alternations in the deposition recipe.

  • Optical Channel Checker

    OCC-50 - ShinewayTech

    OCC-50 Handheld CWDM Optical Channel Checker is specially designed for CWDM installation, maintenance and troubleshooting, which is able to measure and monitor power values of up to 18 CWDM channels. OCC-50 can replace high-cost Spectrometers and conduct quick and reliable measurements in all environments. Thanks for its light, compact and sturdy design, OCC-50 is the ideal tool for CWDM installation and maintenance technicians.

  • pH Controller

    MC122 - Milwaukee Instruments

    With Milwaukee's MC Controllers you can monitor and control pH and/or ORP levels. The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading is Above or Below ( user selected ) the selected set point. These MC Controllers are ideal for CO2 or ozone dosing.