Showing results: 301 - 315 of 579 items found.
-
MVME3100 -
ELMA Electronic, Inc.
The MVME3100 features the NXP MPC8540 processor, offering a growth path for VME customers on the previous generation of VME, specifically MPC8240 and MPC603 family processors.
-
6U VME64x 3200 -
W-IE-NE-R, Plein & Baus GmbH
The VME 3200 crate series provides industry standard VME crates with redundant and hot-swappable front-side plugged in 500W cPCI power supplies in a compact and rugged design. The VME card sized CML shelf manager allows full remote monitoring and control of power supply, fan and chassis.
-
VX3718 -
CAEN S.p.A.
The VX3718 is the new VME to USB 2.0/Optical Link Bridge that fully replaces the VX1718 (VME-USB) and V2718 (VME- CONET) models. The Bridge Implements a VME master controlled by a PC via USB 2.0 and Optical Link (CAEN CONET protocol) including all the functions of its two predecessors in a unique device.
-
CAEN S.p.A.
VME / Optical Link / USB and Ethernet Bridges
-
V977 -
CAEN S.p.A.
The Mod. V977 is a 1-unit wide VME module that can work either as 16 channel general purpose I/O Register or as Multihit Pattern Unit; the operating mode is selected via VME and is signalled via front panel LEDs.
-
GBX25 -
Abaco Systems Inc
NETernity GBX25 is a Layer 3 Managed 6U VME Ethernet Switch. It provides unprecedented flexibility, delivering new levels of simplicity in configuring 6U VME network support and handling almost any network configuration while delivering industry-leading performance. The GBX25 represents the optimum switch solution for any user planning to create new systems based on the 6U VME architecture, or planning to refresh existing systems.
-
VP E2x/msd -
ELMA Electronic, Inc.
The low power VP E2x/msd VME board is designed for long life-cycle use. With lots of I/O interfaces, it provides processing and graphics performance for existing VME systems and runs applications within seconds with the optional Fast Boot software.
-
VIPC627-ET -
Abaco Systems Inc
VIPC627-ET is a 6U VME carrier card with four IP slots and extended temperature range. Two 50-pin, 0.1 inch flat ribbon cable connectors mounted in the front panel provide access to all IP I/O lines. Also, all I/O lines of 'IP D' are routed to VME P2 and 14 user selectable I/O lines of 'IP C' can be routed to VME P2 via a jumper field.
-
pixus technologies
OpenVPX, CompactPCI, VME, and VME64x are open standard backplane architectures commonly used in Eurocard systems. (For OpenVPX products, see the Pixus OpenVPX section.) Pixus has a wide range of CompactPCI, VME, VME64x, and other backplanes available off-the-shelf.
-
V775N -
CAEN S.p.A.
The Mod. V775N is a 1-unit wide VME 6U module housing 16 Time-to-Digital Conversion channels on LEMO 00 connectors. The Full Scale Range can be selected via VME from 140 ns to 1.2 µs with 8 bit resolution.
-
V1740D -
CAEN S.p.A.
V1740D houses VME (VME64X compliant) and Optical Link interfaces. The VME interface allows data transfers of 60 MB/s (MBLT64), 100 MB/s (2eVME), 160 MB/s (2eSST). The Optical Link supports transfer rate of 80 MB/s and offers Daisy chain capability.
-
VX1743 -
CAEN S.p.A.
VX1743 houses VME (VME64X compliant) and Optical Link interfaces. The VME interface allows data transfers of 60 MB/s (MBLT64), 100 MB/s (2eVME), 160 MB/s (2eSST). The Optical Link supports transfer rate of 80 MB/s and offers Daisy chain capability.
-
SKY Computers, Inc.
Each of these loads occur internally to each SKYbolt board at the speed of the internal SKYbolt busses; we are not limited to the speed of the VME bus, the host VME interface or the disk. These program loads also occur in parallel so the startup time is independent of the number of SKY boards in the system.
-
NV8020A -
CAEN S.p.A.
The CAEN Mod. NV8020A is a 19″ x 7U 84TE mixed VME / NIM crate equipped with a 1U common fan unit. The VME section features 8 slots suitable for 6Ux160mm boards, with VME64 compliant backplane. The section is powered by universal AC input Power Supply.
-
V775 -
CAEN S.p.A.
The Mod. V775 is a 1-unit wide VME 6U module housing 32 Time-to-Digital Conversion channels. The Full Scale Range can be selected via VME from 140 ns to 1.2 µs with 8 bit resolution. The board can operate both in COMMON START and in COMMON STOP mode.