Showing results: 4666 - 4680 of 8464 items found.
-
65-221-001 -
Pickering Interfaces Ltd.
The range includes four plug-in models covering matrices of up to 1,536x4 in increments of 128 (model 65-221), 768x8 in increments of 64 (model 65-223), 384x16 in increments of 32 (model 65-225), and 192x32 in increments of 32 (model 65-227). Users can specify as many or as few plug-in modules (up to six) required and can field upgrade the chassis to extend the matrix when necessary. Another important feature is that over 1,500 relays can be closed simultaneously for specific conditions for parametric testing.
-
GOM GmbH
The ARAMIS 3D Camera is a measuring system for full-field and point-based measurements. With a high resolution of 6 megapixels and a maximum image recording rate of 25 Hz at full resolution, the sensor is suited for medium-fast applications in the field materials and components testing. In a different configuration with a resolution of 2.3 megapixels and a maximum image recording rate of 130 Hz at full resolution expands the range of applications. The ARAMIS 3D Camera is employed in general research and industrial applications for measurements of small specimens up to large objects.
-
HABCO, Inc.
As the leader in testing and ground support equipment for more than 45 years, HABCO Industries has consistently provided its customers everything they need, just as they need it, right when they need it – with unparalleled attention to detail and customer support. Habco’s unmatched, highly focused and passionately dedicated staff draw daily upon their unique capabilities and extensive experience in electro-mechanical systems, user-friendly software, and design for Lean manufacturing. We consistently anticipate the needs of our customers and routinely exceed their expectations.
-
SA10A -
Elcon International AB
It has a built-in micro Ohm meter/Ductor for measuring of static and dynamic resistance of the breaker poles. It only weighs 11,6 kg. The versatility and precision that this unit offers is, without question unchallenged, and it will indeed be your best partner when testing circuit breakers. Tests in areas with high induction at known problematic substations has proven the SA10A to be the only circuit breaker timer that could withstand these extreme conditions. It's rugged, it's small and highly appreciated by our customers.
-
Captronic Systems Pvt Ltd
With increasing complexity of RF Systems, the demand on RF front end and the bandwidth requirements continue to increase, thereby the rate at which the data needs to be streamed to the disk is increasing at exponential rates. This all comes along with increasing cost of field trials and is a big challenge that RF engineers and scientists are facing today. Record & Playback systems solve this challenge by recording the IF & RF field data, this data when played back provides seamless information which is essential in testing RF systems.
-
Keystone Compliance
Ingress protection testing tests the level of protection an enclosure provides against intrusions. Two such sets of ingress protection tests involve exposing the equipment under test (EUT), to water jets and powerful water jets. These tests are numbered IPX5 and IPX6. The first digit, represented by the “X”, ranges from 0 to 6 and specifies the protection from solid particles. The second digit, in the case of water jets, would always be a 5, and in the case of powerful water jets, would always be a 6.
-
Keystone Compliance
Ingress protection testing tests the level of protection an enclosure provides against intrusions. Two such sets of ingress protection tests involve exposing the equipment under test (EUT), to spraying water and splashing water. These tests are numbered IPX3 and IPX4. The first digit, represented by the “X”, ranges from 0 to 6 and specifies the protection from solid particles. The second digit, in the case of spraying water, would always be a 3, and in the case of splashing water, would always be a 4.
-
RS-60K -
Taylor Dynamometer, Inc.
s RS-60K towing dynamometer is designed fortesting Class B trucks and is the most full-featured, reliable and accuratetowing dynamometer in the industry. The RS-60K is built with a heavyduty steel frame, heavy-duty industrial axles and rides on an air ridesuspension. The RS-60K is designed to maintain 60,000 Newtons ofconstant drawbar pull and the ability to simulate an uphill slope of25%. The towing dyno uses absorbers with special high temperaturecoils powered by an industrial generator so there are no lead-acidbatteries to charge and testing is unlimited at low speeds.
-
BK8017 -
BaKo Co., Ltd
If you are putting out thousands of linear vibration motors every day, the BK8017 might be just what you need for high quality product line testing. Based on the popular BK2120C Linear Vibration Motor Tester, you can run up to four vibration sweeps that you define and the results are analyzed by the software. DUT's are then automatically sorted into the appropriate bin. The whole process, equivalent to 3 BK2120C machines, takes just a few seconds and can be run by one person.
-
BK2120C -
BaKo Co., Ltd
the BK2120C runs up to 4 vibration sweeps, which you define, to check whether your linear vibration motor is within the limits you set. And now you can set up your own feedback so it's even easier to determine the class of pass or the reason for failure. You still get fast, high quality testing for your linear vibration motors on the product line. And it's still versitile enough to be used for QA or QC as well.
-
Teledyne Marine Benthos
The Teledyne Benthos Testit Hand Held Acoustic Tester enables in-air acoustic testing of all the Teledyne Benthos R-Series acoustic releases prior to deployment. The Testit is powered by six AA batteries and is lightweight and compact for hand held use. It is also splash-proof, enabling it to be exposed to marine environments. Using the Testit, any number of R-Series acoustic releases can be tested at sea or on shore without the need to set up and operate a deck box. The Testit includes a carry case with batteries and a manual.
-
Teledyne Defense Electronics
The Teledyne Advanced Electronic Solutions Program Manager is the primary customer interface; your voice inside our facility. From the receipt of RFQ to proposal, purchase order to materials procurement, kitting to fulfillment, through testing and shipment, a Teledyne EMS Program Manager manages each step in your product's life cycle. Teledyne EMS Program Manager leads an IPT (Integrated Program Team) to ensure thorough attention to your specific requirements, change order management, resolution of issues and compliance.
-
Vision G2 Classic 6 -
Teledyne LABS
The Vision G2 Classic 6 dissolution tester is the compact, rugged workhorse sibling to the Vision G2 Elite 8. Named in honor of the world’s first dissolution tester, a six-position test station introduced by Hanson Research in 1969, the G2 Classic 6 is precision engineered to ease the rigors of manual dissolution testing. The G2 Classic 6 meets and exceeds worldwide standards including compliance with USP, FDA, ASTM, EP, JP, CE, CSA, RoHS, and 21 CFR Part 11.
-
ZhangZhou Weihua Electronic co.,ltd
A device that tells the user whether an object has an electrical charge. It can be a simple, pen-shaped piece of testing hardware that indicates the presence of electricity, or it can be an advanced tool used to detect precise voltage levels in electrical systems. Voltage detectors use either visual or audio cues to tell the user whether voltage is present. Some are equipped with lights and numbers that indicate the level of voltage, while a less advanced voltage detector might simply make a beep to indicate that a level of detectable voltage is present.
-
Frequency Electronics, Inc.
Elcom’s UFS family of microwave synthesizers meets today’s most demanding testing needs found in the laboratory, on production lines, and in system development and maintenance.
